bing tracking image
Q & A Icon

Recommended Wiring Harness and Base Plate for a 2020 Chevy Equinox  

Question:

which base plate and wiring kit do i need for a 2020 equinox. i have a roadmaster falcon tow bar. i want to use lights on tow vehicle

0

Expert Reply:

There are two options for a wiring harness for your 2020 Chevy Equinox depending on what model you have. If you have LED tail lights you will want the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item # RM38FR. If your Equinox has incandescent tail lights you'll need item # RM26FR.

The best base plate kit that is compatible with the Falcon tow bar item # RM-522 is going to be the Roadmaster Direct-Connect Base Plate Kit item # RM-523193-5. This base plate is custom fit and has removable arms. With the arms removed the front end of your Equinox will look as close to factory as possible.

I have listed some other parts you will need to flat tow your 2020 Chevy Equinox below along with any installation videos we may have:

Charge Line Kit - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25

Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

expert reply by:
0
Jerred H

Products Referenced in This Question







Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>