Will Thule Fairing Fit Square Crossbars

Question

Question:

Will the Thule fairing fit on any square crossbar?

asked by: Tristan

0

Expert Reply:

I spoke with my contact at Thule and the Fairing for Roof Racks, # TH82WV, was designed for use on the Thule square bars.

Since test fits have only been performed on Thule crossbars, we can not guarantee that the fairing will work on all square crossbars.

expert reply by: Leah S

0

Answer 1

You would first need a roof rack for the vehicle. The roof rack would provide the crossbars that are the attachment point for the #TH7326 ski/snowboard rack. To equip the 2007 Civic Sedan with a Thule roof rack, you'd need the following parts:…

view full answer...

Answer 2

I checked with Thule and the recommended fairing for their square bar roof rack on your 2010 Ford Fusion is #TH82WV which is the 44 inch model that you mentioned. The vehicle in the video happens to have side rails to which the crossbars are…

view full answer...

Answer 3

I checked with Thule and the 44 inch fairing part #TH82WV is the correct size for the Thule Aeroblade roof rack on your 2006 Honda Civic sedan.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Will Thule Fairing Fit Square Crossbars

Product Page this Question was Asked From

Continue Researching