Which Thule Fairing for Thule Aeroblade Roof Rack on 2006 Honda Civic

Question

Question:

Hello, I have a Thule AeroBlade on my 06 Civic and Im looking for 44Thule Wind Fairing. How do I know if i PO the correct 44Thule Wind Fairing bracket for my Thule AeroBlade?

asked by: Louie R

0

Expert Reply:

I checked with Thule and the 44 inch fairing part # TH82WV is the correct size for the Thule Aeroblade roof rack on your 2006 Honda Civic sedan.

expert reply by: Jameson C

0

Answer 1

I checked with Thule and the recommended fairing for their square bar roof rack on your 2010 Ford Fusion is #TH82WV which is the 44 inch model that you mentioned. The vehicle in the video happens to have side rails to which the crossbars are…

view full answer...

Answer 2

When looking at fairings you always want to choose one that spans the space between the legs of your roof rack. For your application the 44" long AirScreen #TH82WV would likely be the best fit. If you take a measurement and you find something a…

view full answer...

Answer 3

I spoke with my contact at Thule and the Fairing for Roof Racks, #TH82WV, was designed for use on the Thule square bars. Since test fits have only been performed on Thule crossbars, we can not guarantee that the fairing will work on all square…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Which Thule Fairing for Thule Aeroblade Roof Rack on 2006 Honda Civic

Product Page this Question was Asked From

Continue Researching