Capacity of Thule SquareBar Roof Rack on 2004 Honda CR-V

Question

Question:

Product description lists weight capacity at 150. If you click on more details it lists capacity at 220. Which is correct?

asked by: Mike

0

Expert Reply:

The weight capacity of the # TH712200 crossbars themselves is 220 lbs. The weight capacity of the whole set up (the # TH460R feet and the # THKIT3050 ) with the capacity of the roof factored in is 150 lbs.

Any roof rack system will only be as strong as its weakest component, and in this case it appears that the capacity of the rack is de-rated by because of the lower capacity of the roof. This is pretty common to be honest.

expert reply by: Mike L

0

Answer 1

You will want to make sure you get a roof rack that is designed for your 2005 CR-V. When traveling you want the equipment you use to be dependable. For a roof rack I recommend the Rhino-Rack RVP Series Roof Rack, part #RRRVP01. This roof rack has…

view full answer...

Answer 2

The Rhino Rack #RRRVP01 RVP roof rack is a confirmed fit for your 2005 Honda CR-V. When installed, the crossbar spread (center to center distance between front and rear crossbar) will be 33 inches. The SportRack #SR9035 roof cargo basket is…

view full answer...

Answer 3

The Rhino Rack part #RRRVP01 is a confirmed fit for your 2005 Honda CR-V. It installs by attaching to the fixed mounting points of the roof. To put it on is very easy. You just have to thread the bolts through the bolt hole in the roof. Price is…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...