Long Shank 2-5/16 inch Hitch Ball

Question

Question:

Searching for a 2-5/16 Hitch ball with a very long shank.

asked by: Jack G

0

Expert Reply:

The 2-5/16 inch hitch ball with the longest shank that we carry is the # BWHB94003 which has a 3-1/4 inch long shank that is 1-1/4 inches in diameter.

expert reply by: Jameson C

0

Answer 1

You will have roughly 1-1/4" of space to work with for the B&W 2-5/16" Hitch Ball w/ 1" Rise - 1-3/8" Diameter x 2-3/4" Long Shank #BWHB94007.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Our contact at B and W recommended 120 ft lbs of torque when tightening the nut of the #BWHB94003.

view full answer...

Answer 8

The Curt Rebellion XC cushioned ball mount part #C83WR would cushion the ride quality and reduce the movement you are experiencing but an easier and most cost effective solution would be an anti-rattle device like the etrailer #e99007 which will lock…

view full answer...

Answer 9

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls #C83WR is 8" from the bottom of the receiver shank to the bottom of the adjustable mount.

view full answer...

Answer 10

I could not find a reference to Class V-19, but the B&W 2-5/16" Hitch Ball #BWHB94002 is Class V rated and has a 24,000 lb weight capacity. The hitch ball has a 1-1/4" diameter x 2-1/2" long shank so as long as your ball mount…

view full answer...

Answer 11

The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…

view full answer...

Answer 12

We do have an adapter that will allow you to attach a 2" cargo carrier to the 1-1/4" hitch on your 2016 Nissan Altima. I recommend the adapter #e43YR. This is 6-1/2" long and will go in to your 1-1/4" hitch and give you a 2"…

view full answer...

Long Shank 2-5/16 inch Hitch Ball

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching