Recommended Brake Upgrade For Horse Trailer w/ 7,000lb Axles
Question:
Do these backing plates have the same bolt pattern as the 5 bolt backing plates on the 7000 pound axles? Part #AKEBRK-6, for instance. We have a large horse trailer, with 12x2inch brakes on it we want to convert larger brakes. Thank you.
asked by: Bob C
Expert Reply:
The etraile Trailer Brake Assembly you referenced, part # AKEBRK-12, is intended for 12K-rated axles. This brake assembly uses a 7-bolt mounting pattern to attach to the axle brake flanges. This mounting bolt pattern is not compatible with the other brake assembly you referenced which uses a 5-bolt pattern for installation.
The only option for better brakes that will fit your axle would be converting it to Electric over hydraulic (EOH) brakes using the disc brake kit # HSE7K-T1 which includes all of the brake lines, fittings, and the actuator needed for the conversion. This is designed for tandem axle trailers which your horse trailer should have, but if you have something different just let me know.
Lastly you'll need to make sure that your trailer brake controller is compatible with EOH brakes, as they aren't all compatible. If yours isn't compatible then I recommend going with the Tekonsha Prodigy P3 # 90195 which will work perfectly with this style of brakes.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- Hydrastar
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 12K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 5 Inch Drum
- 12000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 20'
- Video: Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS381-9066 Review
- Search Results: electric hydraulic brake actuator
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Shop: Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3.5K
- Search Results: tie rod
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Can 1600 PSI Pressure from Actuator be Used with Drum Brake Assemblies
- Search Results: junction box
- Search Results: 7 way female plug
- Search Results: 7 way female
- Search Results: 7 way junction box
- Search Results: 7 wire
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Video: etrailer Electric Trailer Brake Kit Installation
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Shop: Gooseneck Hitch
- Article: Most Popular Wheel Bearings
- Shop: Suspension Enhancement