Install Hardware for Westin Ultimate Bull Bar # 32-1695 on 2014 Nissan Xterra

Question

Question:

I am needing a installing kit for Westin # 32-1690 ultimate Bull Bar for a 2014 Nissan Xterra what would that p/n be

asked by: Carol J

0

Expert Reply:

We do offer a Westin replacement hardware kit for the # 32-1695 Ultimate Bull Bar, the part number is # 32-169PK.

expert reply by: Mike L

0

Answer 1

The Replacement Installation Bracket Kit #32-169PK is designed to fit the following vehicles: 2005 - 2012 Nissan Frontier All Models 2005 - 2007 Nissan Pathfinder All Models 2005 - 2012 Nissan Xterra All Models It would not fit your 2004 Ford…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Oscar, 2006 Ford Explorer models unfortunately can't use a universal diode wiring kit so you'd have to either go with a bulb and socket light kit like part #RM-155 or plug-in magnetic lights like part #TL21RK. If you decide to go with the…

view full answer...

Answer 4

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 5

There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…

view full answer...

Answer 6

From what I could find, the #171255UC grease seal has an inner diameter of 1.719 inches and an outer diameter of 2.565 inches. These dimensions match our TruRyde Double Lip Grease Seals, #RG06-050. If possible, I recommend verifying the inner…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

You can use the LED Light Bulb Load-Resistor Kit #DI34ZR on that camera power wire to draw the full 12V needed or you can use the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass #20142 that has an integrated load-resistor for that function.

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Yes! What you're going to need for your 2022 Chevrolet 2500HD, is the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR. This will plug directly into your vehicle's 7-way outlet and will act as a connector…

view full answer...

Answer 11

Hey Tami, so since your 2021 Toyota Highlander has the flush mount rails, your only option for adding a cargo basket will be to first add a roof rack with crossbars. I suggest going with a Rhino Rack Aero Bar roof rack, which will consist of the…

view full answer...

Install Hardware for Westin Ultimate Bull Bar # 32-1695 on 2014 Nissan Xterra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching