Recommended Load Resistor Adapter for Furrion Observation Camera on Travel Trailer for Signal

Question

Question:

I have a Furion observation camera installed on my TT. Changed tow vehicle from a 2017 GMC 1/2 ton to a 2016 F-250 Superduty. Probable is that I loose camera picture while under way. Camera works fine in reverse or while parked. Talked w the Furion folks and they told me that I am not getting a full 12 volts to the camera because of the lights out sensor on my ford. Do you have a product that would fix this?

asked by: Raymond

1

Helpful Expert Reply:

You can use the LED Light Bulb Load-Resistor Kit # DI34ZR on that camera power wire to draw the full 12V needed or you can use the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass # 20142 that has an integrated load-resistor for that function.

expert reply by: Jason S

1

Answer 1

Yes! What you're going to need for your 2022 Chevrolet 2500HD, is the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR. This will plug directly into your vehicle's 7-way outlet and will act as a connector…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Item #118701 does not fit a 2023 Hyundai Palisade but I have one that does. It is the Curt T-Connector Vehicle Wiring Harness item #C43FV. This custom-fit T-connector plugs into your Palisade's wiring harness, which is located behind the tail…

view full answer...

Answer 6

The best trailer wiring harness option we offer for a 2023 Hyundai Palisade is theCurt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C43FV. This offers a completely plug and play installation with no splicing into the vehicle…

view full answer...

Answer 7

Thanks for reaching out, i have a couple things for you to do. Let me explain below: *12V PWM Filter for RV Backup Camera Systems - Hardwire #VGR64VR. The newer GMC vehicles use PWM(Pulse With Modulation) in their electrical systems. The Furrion…

view full answer...

Answer 8

Yes, Per the manufacturer The etrailer Trailer Hitch Receiver #e95ZR is confirmed to fit behind the removable cover on the 2023 Hyundai Palisade. The wiring harness has been changed, The Curt Wiring Harness #CU94FR is confirmed to fit your 2023…

view full answer...

Answer 9

The best hitch for a 2024 Hyundai Palisade is the etrailer item #e95ZR. This hitch is custom fit and bolts to your Hyundai with included hardware. It is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 750 lbs…

view full answer...

Answer 10

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 11

I recommend the etrailer Trailer Hitch Receiver #e95ZR for your 2023 Hyundai Palisade. I like the etrailer hitch over the others that we offer because it has a hidden design that will give you a clean off the factory look when the hitch is installed.…

view full answer...

Answer 12

In regards to the wiring for your 2023 Hyundai Palisade, you'll need to go with a hardwire harness like the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part #C59236. Then, you'll need an adapter, the 4 to 7-Way with…

view full answer...

Recommended Load Resistor Adapter for Furrion Observation Camera on Travel Trailer for Signal

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching