Summer Starts Here - Save up to 70%
Table includes 2 legs that mount to the surface of your RV floor with the included hardware. Stylish cherry wood-grain finish matches the decor in your RV. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack.
Features:
Specs:
Need to replace or upgrade the old, warped dinette table in your RV? This wood-grain laminate dinette table provides you and your family with a level, durable surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, cherry finish will look great with the decor in your RV.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water.
This dinette table will replace or upgrade the old, existing table setup in your RV or camper. 2 Legs, 4 brackets, and hardware are included.
There are 3 white circles on the back of the tabletop to give you a general suggestion for where to mount the legs. We recommend you install the legs onto the outer circles for the best stability, but you can install them anywhere along the internal steel mounting plate, as long as they're no more than 24" apart. This 30" x 10" plate will help improve screw retention for when you attach the legs to the tabletop.
Once you've chosen where you want to attach the legs, fasten 2 brackets onto the table and 2 brackets onto the floor with the mounting hardware. Drilling will be required. To finish, simply twist the legs onto the brackets.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com and today we're gonna take a look at this etrailer RV Surface Mount dinette table. Now, this dinette table is going to be the perfect place for your friends and family to gather in your RV dining area. It has been designed to provide a strong and stylish upgrade to your RV. Now this table is made here in the USA with a ultra strong high density EPS foam tabletop core. And so that's going to ensure durability and stability in this table.
And if you notice here, this also has an edge banding that's going to reinforce this table and it's going to seal moisture out preventing this tabletop from peeling or cracking or warping. So this is going to be highly resistant to spills. You're not gonna have to worry about liquids getting into the table and possibly damaging the table itself. And this cherry finish happens to be one of my favorite that we offer. And we do have other finishes as well that whatever's going to work best for the core in your RV.
So as you can see this does come in cherry, in maple and white. And not only do you get your choice of finish but you also get your choice of trim whether it's the color matching trim or the black trim. And as I mentioned this is our cherry laminate finish with the black trim. And so that black trim really adds a sharpness to the look of this table. Now this table not only comes in different finishes and different trim options but it also comes in different sizes.
So depending on the space that you have in your RV dining area we should have the size that you need. The table that I have here is 42 inches long and of course all of our tables are 30 inches wide. So you get an idea of the size of this table and I'm gonna stand up here on the pallet that we have this mounted to. And this will be a little more stable in your RV than on this pallet, but I'm about 5'9", 5'10" and this table comes up to about the middle portion of the top of my leg. So it kind of gives you an idea of the size and the the height of this table itself.
So depending on, again the space that you have that you're needing to fill we should have the size that you need here at etrailer.com. Now, taking a look here at the lower portion of our table that this is, as I mentioned, a surface mount installation. So we have steel table legs here that are going to mount to the floor with the included hardware. And the leg itself has two brackets. One for securing it to the tabletop and one to secure it to the floor. And so this is going to secure directly to the floor. And we also have this table available with just one leg instead of two. So if that's an option that you're looking for and you don't need the two legs we do have the one leg option available. Now I do wanna give you a measurement of the clearance from the bottom of our tabletop to the floor. So lemme see if I can line up my tape measure here to where you can see it. And as you can see from the bottom of our tabletop to the floor we're sitting right at 28 and a half inches of clearance. So we do have a recessed mount option available as well where the table leg will actually install into your floor. And because of the leg going into the floor you will lose about two inches of clearance between the bottom of the table and the floor. So if whichever mountain option is best for you we have those options available here. Now the table can also be removed from the legs and the legs can be removed from the base to provide room for a foldout bed. So lemme show you just how easy that is to do. It's gonna lift this table off the legs and again the table is very manageable. And then once you remove the table, you can remove the legs. And I'm just gonna go ahead and remove this one leg. The overall height of just the leg itself is 27 inches tall and the diameter of the leg is two and a half inches. And then the diameter of our base bracket here is six and five sixteenths inches. And so this leg has these two plastic end caps on either end, so you don't have metal on metal rubbing up against each other whether it's in the base here or in our table bracket. Now I'm gonna go ahead and just give you a brief view of the bottom of our table here and talk a little bit about the installation. So lemme go ahead and zoom in again. And at the center of our table, we have an internal 26 gauge galvanized steel screw plates that runs about 30 inches long and 10 inches wide. And that plate is going to assist with screw retention when you are installing your brackets onto the table with the included hardware. And so as long as you're within that range of 30 inches long and 10 inches wide, you're going to be fine. We just have these stickers here as recommendations for you as to where to put those legs, especially if this is like a new install in your RV, but you don't actually have to attach your leg or your bracket to the sticker. Those are just recommendations. As you can see, I do have some holes here because I installed just one leg here in the center so you're not gonna have pre-drilled holes but that was just from a previous install that we did on this table. Now I do wanna mention as well, we recommend not making pilot holes into the table during installation but just to go ahead and screw directly into the table through the plate when you are installing your brackets. So I'm gonna go ahead and just replace our table back on the legs and just line them up here real quick. And it is as easy as that. So again, table is very manageable, but yet very durable. So if you're looking to upgrade your dinette table in your RV, I think this is going to be a great option for you to consider. We have, like I said, various options for you to choose from, in regards to finish, in regards to size and even mounting options as well to best fit your setup in your RV. Well that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Table includes 2 legs that mount to the surface of your RV floor with the included hardware. Stylish cherry wood-grain finish matches the decor in your RV. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack.
I purchased this table a year ago and installed it in my RV that I live in nearly year-round and it still looks like it's brand new. I'm very pleased that the dual support legs provide a solid foundation such that there is no rocking or wobble when in use. Very happy with this table.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.