THIS ITEM IS NOT A FIT FOR
2021 Ram 3500
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e66AR
Retail:$324.60
Our Price: $202.94
You Save: $121.66
2021 Ram 3500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (39)
- Q & A (0)
- Photos
etrailer Trailer Hitch - e66AR
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Concealed Cross Tube
- etrailer
- 400 lbs TW
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e66AR etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
This Product Fits The Following Vehicles
- 1992 - 2011 Ford Crown Victoria
- 1992 - 2011 Mercury Grand Marquis
- 1983 - 1991 Mercury Grand Marquis excluding Wagon
- 1979 - 1986 Ford LTD Sedan
- 1987 - 1991 Ford LTD Country Squire Wagon
- 1983 - 1991 Ford LTD Crown Victoria excluding Wagon
- 2003 - 2004 Mercury Marauder
- 1980 - 1983 Lincoln Mark VI
- 1979 - 1982 Mercury Marquis Wagon
- 1979 - 1982 Mercury Monterey Sedan
- 1981 - 2011 Lincoln Town Car
- 1980 - 1989 Lincoln Town Coupe
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Product did not meet expectations
- Too difficult to install
- Wrong item was ordered
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e66AR
Average Customer Rating: 4.8 out of 5 stars (39 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Jonathan R04/26/2024
came with damaged box and scratches
by: Menelaos01/22/2024
I was able to install the trailer hitch on my 2011 Marqui by myself.
I utilized 3 jacks secured the car with supports.It went very smoothley.
After watching the Videos Several times, it was very easy.
Then I watched several times the videos on the installation of the electrical harness, it went very smooth as well.
Thanks etrailer you made it very easy with all the instructions.
by: Bruce 03/12/2024
1988 Ford LTD Country Squire Wagon
Installation took under an hour. Hitch looks great and very well built! I'm pleased with how quickly it was shipped and with the link that showed the shipping progress. Thanks!!!
by: Ed05/17/2024
Joshua was fantastic to deal with made the purchase very easy,the part fit great moving forward i will only deal with etrailer ..THANK YOU
by: Kevin 07/24/2023
Great product. You will need a floor jack to hold it in place while you drill the holes. Super strong.
by: Daniel 02/17/2024
Good fit, quality product
by: James02/01/2024
2009 Lincoln Town Car
The hitch looks and feels sturdy but am disappointed that drilling is required. thought it was custom fit.
by: Clifford 06/16/2023
Pontiac Trans Sport Van
Fit perfect with good instructions and minimal drilling. Used exclusively for wheel chair transport with adequate car and ground clearance.
by: Topher01/26/2024
It looks amazing
by: Gina 01/26/2024
Hannah was very pleasant and helpful. Thank you.
by: Emily 06/20/2023
Just got the Hitch Receiver....just what we'd hoped for. Fits the car well, very sturdy.
by: Bruce 10/22/2023
Good quality easy install
by: James 08/02/2023
It was fairly easy to install and I'll be back when I trade cars.
by: Gary 11/10/2023
Great fast service!!
by: Mitchell 10/10/2023
GREAT SERVICE
by: Jacob 08/16/2022
Crown
It’s a decent hitch, not difficult to install. The directions were kind of generic it seemed to try and cover a more broad group of vehicles that it fits for. If you’re installing on a 2007-ish to 2011 crown Vic make sure you put just one single square washer spacer between frame and hitch in the hole closest to the front of the car and two square washer spacers between the frame and hitch for the bolts at the back of the car.
by: Mike 07/14/2023
Extremely quick service. Ordering process great. Could not have been better
by: Delano07/27/2022
The distance between the frame mounting plates should be increased by .5 inches. The insides of the mounting plates rub against the trunk tub.
by: Fred A03/31/2023
Good product the compunctions to order the product and help from Lori your customer rep was great
by: Thomas 01/22/2023
2007 Mercury Grand Marquis
it's well-built looks very strong.well worth the price, fast shipping also.
by: Peter 02/11/2023
Fit and finish are great. Shipping was very prompt.
by: Eddie 11/22/2022
Great quality hitch and very easy to in stall.
by: Jimmy 09/14/2023
very good
by: Ben 02/07/2024
by: Dennis 04/09/2024
25
308
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Does 1999 Mercury Grand Marquis Need Converter For 4-FlatYou will indeed need a 4-flat with a converter for your 1999 Mercury Grand Marquis, with the correct part being the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. Then if you also need a hitch, the correct fit is the Trailer Hitch Receiver # e66AR.
view full answer... - 2011 Mercury Grand Marquis Trailer Hitch RecommendationI really like the etrailer Trailer Hitch Receiver # e66AR for your 2011 Mercury Grand Marquis for a few reasons; it has the matte black finish that blends in with any black trim on your vehicle and hides scratches from road debris, plus it has the hidden crosstube so it looks great and promotes the best ground clearance possible.
view full answer... - Hitch and Trailer Wiring that Fits 1993 Ford Crown Victoria Police InterceptorFor a hitch for your 1993 Ford Crown Victoria Police Interceptor the etrailer hitch part # e66AR would be a great option. Then for trailer wiring the Curt kit part # C55326 is a fit and would install easily.
view full answer... - Ball Mount Recommendation for Hitch for a 1996 Lincoln Town CarThe hitch part # 36116 is a Class II hitch that has the part # 36063 as the recommended ball mount which has a 3-1/8 inch rise. If there was a Class II hitch compatible ball mount that had a 3-1/4 inch rise available you could use it, but we do not carry one. That being said, the difference between the two sizes would not be hardly noticeable so the 3-1/8 should work just fine. For a 2 inch ball you would need part # 19258, or for a 1-7/8 inch ball part # 19257.
view full answer... - What Size Drill Bit Is Needed For Installing etrailer Receiver e66AR on 2008 Mercury Grand Marquis? You will need a 1/2" drill bit for the etrailer Trailer Hitch Receiver # e66AR to install on your 2008 Mercury Grand Marquis.
view full answer... - Hitch and Mounting Hardware for a 2000 Mercury Grand MarquisYes, the etrailer Trailer Hitch Receiver item # e66AR comes with all the necessary hardware to install this hitch to your 2000 Mercury Grand Marquis. If you need a wiring harness to control your trailer's lights you will want the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
Justice A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/26/2024
I am sorry that it came like this. I will have our Customer Service team reach out to you.