To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 5.0 out of 5 stars (9 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.Perfect fit and function as usual from etrailer.
Great product, with a great fit and easy install!
Went on easy love this trailer hitch made for my small 2003 yukon slt
Piece of cake to install, works great.
Looks very strong and I like the way it tucks up behind the bumper; looks good from outside.
I took two photos, one showing how it looks from outside and one showing how that the hitch is fairly high off the ground - unlikely to hit the ground even in a steep situation.
I came close to giving it 5 stars, except...
1- I had to manhandle it to get bolt holes to line up. I know they warn that it might have gotten "sprung" in shipment - no way; this was just a misalignment of the holes. I used a tire iron to lineup holes and all was then OK.
2- The welds where the round tube joins the mounting plates were not very well made. Not concerned about strength, just they were sloppy. I expected better.
Fast Shipping easy installation perfect fit good not buy same product locally, etrailer helpful in sending the right fit thanks will be shopping more with etrailer.
Great hitch, super easy to install. Just make sure you have a torque wrench to tighten bolts at correct psi. Short sockets are a must to be able to tighten the two bolts that go under the bumper. I had to use a wrench for those two. Took a while but other than that wary install.
The Hitch was good quality two holes had to be die grinded slightly still only took about 15 minutes to install powder coating is nice to would buy again
Great product and Delivered in a timely manner. The staff, Cam J, was very helpful and professional and followed up every step of the way to replace the original product purchased. Great company to deal with.
Great product that fit perfectly
I decided to purchase this based on eTrailer's recommendation. Glad I did. I had to replace the old rusted OEM hitch on a 2004 Chevy Tahoe Z71 and this hitch fits perfectly. Installation was quick and easy, even working by myself. I recommend this product. Well made.
The product looks great. However there are two bolts that hold the bumper in place have to come out These are two of the bolts rhat also hold the Hitch. So far I have not been able to remove those bolts and will have to take the truck in to some one with a heavy duty impact wrench to remove those bolts so I can get the hitch in place. The instructions do not mention this.
installation went just as the instructions stated. instructions should mention it may be necessary to remove corrosion from the two bumper weldnuts & not to tighten fasteners until all are connected.
Product was really well built came in timely manor and was direct fit I’m extremely happy and satisfied
The Curt Trailer hitch was easy to install in my 2003 Chevy Tahoe. We did encounter a little difficulty because my truck had been rear-ended in the past so the holes were a little out of alignment but after a few tries I was able to install it. The hitch can be installed with socket driver and torque wrench although an impact wrench makes the job a lot easier.
The order arrived the day they promised and the eTrailer.com customer service was exceptional. They sent regular updates on my order and created helpful links with instructions and video.
Product shipped on time and in perfect condition - just as described. High quality hitch, after being abused on Vermont roadways for a year it is strong and durable as ever, I tow a light trailer a few times a week with this hitch. Would highly recommend this hitch and etrailer.com
Did not fit. Only after I got it did I figure out that it was wrong for a small percentage of cars. I have to say that etrailers customer service is awesome. They called Curt then called a competitor to check fitment of there product to make sure it would work. Shipped out a replacement at no cost and took back the other hitch. I have used them in the past and will use them again. Great company that will stand behind there product!!!
One year later and it still looks and functions as brand new, truck has 265,000 miles and tows cars and whatever else like a champ. Highly recommend Curt products especially ones purchased through etrailer!! Thanks again!!
I ordered the curt class 3 hitch and Hopkins 7 blade/4 flat wiring kit with bracket on a Thursday at 2:00 pm at etrailer's shop. Friday morning at 10 am I just got my old hitch off and the ups guy shows up with the parts...perfect timing! I had it on in 20 minutes it was so incredibly easy. A second person would have been helpful to support the weight of the hitch while you're bolting it up. I just used an old sprinkler valve box to set it on. Drilled 2 holes in the bumper for the bracket and ran the self tapping screws in then hooked my factory harness to the adapter and done! Love etrailer and their products and their service. Always helpful, friendly and there if you need them. I'll try to send pics of the install later.
Was very pleased to see the trailer hitch show up today, just like you told me. Took about 20 minutes to install ( mainly because I had to walk to and from my shop to get the right socket a couple of times) Fit like a "glove". I've been a fabricator (metal) and owned my own shop for thirty-some years, and was going to build one myself.I think the smartest decision I made was to purchase your hitch instead of doing it myself. Thanks for the all around great job!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.