To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today in this 2013 Ford F350 super duty crew cab, we're going to show you part number WT110020. This is the WeatherTech mudflaps for the front wheels. Now we have one of them already installed on the driver's side of the truck, and you can see how it matches with the contour of the body work on the truck. You can see where the bodywork goes into the mudflap right through here. Now this is a no-drill installation, it uses the factory attachment points here and here. It also uses the factory hardware as well. It does come with inaudible 00:00:34 hardware on the bottom on the other side. Now hardware inaudible 00:00:37 is included with the kit, it is all stainless steel. It's semi-rigid where it goes up towards the bodywork, but it's also flexible at the bottom a little bit as well.
And if we measure roughly from the bottom edge of the body work, down to the bottom, to give you an idea of length, about 8 inches in length. Now I'll go head and show you how to install. We'll go ahead and remove the factory fasteners, located here and here. To remove these screws you use a 5.5mm socket. We'll then take our mudflap and put it up in position, make sure it fits around the bodywork, we'll reinstall our fasteners. Go ahead and run down our hardware, just to take up some of the slack. We'll still leave it loose so we can move around to install the last bit of hardware. Our hardware will be this stainless steel bolt, with phillips head, then your washer, and a lock nut. Let's go ahead and run this through the bottom of our mudflap, and move around to run it through the existing hole in the bodywork, and reaching from the top and going down at a little bit of an odd angle, we can install our flange nut. There are screws right here, and the threads of our screw are right here.
They're hidden just behind the body work. All right now to get started, you'll use a number 2 phillip screw on the outside to tighten it down. With all our hardware loosely installed, we'll go ahead and tighten them down. Let's start with ones on the outside first, and then do the bottom ones. When you tighten these down, we don't have to crush them, just where they tighten up and stop on their own. Go ahead and give inaudible 00:02:25 a shake test, firmly installed. Okay, with that, that'll finish it for part number WT110020, the WeatherTech mudflaps, on our 2013 Ford F350 super duty crew cab. .
Average Customer Rating: 4.8 out of 5 stars (1381 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.The mud flaps fit right on as advertised. Had them on a year now and still look good and doing the job they are suppose to do. Good product and company to do business with. Would buy them again.
I have been very satisfied with these mud flaps. Highly recommend!
Don S.
10/26/2021
Mid flaps are still in GREAT shape.
Even when they were out of stock , I received a e-mail letting me know that they were out and that my order would ship ASAP , Received items today sooner that was informed , Installation was a breeze , all parts were in kit and instructions very clear , Installed all four of them in less than 30 minutes .
Fit was perfect .
Even when they were out of stock , I received a e-mail letting me know that they were out and that my order would ship ASAP , Received items today sooner that was informed , Installation was a breeze , all parts were in kit and instructions very clear , Installed all four of them in less than 30 minutes .
Fit was perfect .
The order arrive in 3 days . I took me about 15 minutes to install them. Ordering was rather confusing because it gave you 3 options but they all has]d the same part number. E Trailer's technical support is outstanding and I always try to order from them when I can.
This product is exactly what it said it was going to be. It was so easy to install that my 11 year old son installed them on my truck himself. The product forms to the trucks fenders perfectly, as if they came from the factory.
As advertised, easy to install, no drilling. Great quality of material.
Easy installation. Looks great.
Fit easily, strong and just what I needed. Installed in 15 minutes.
Easy to install. fits well
Fit perfect and was easy to install
Good fit. Excellent product.
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill R.
7/20/2021
The flaps are still in good shape and are doing what they are suppose to do. Very pleased all around and would buy them again.