TS Rails for TruXedo Elevate Rack System - Full Size - Short Bed - 72" - Aluminum

See what our Experts say about this Truxedo Accessories and Parts

• Hard Tonneau Cover Compatible with Putco Venture Tec Overland Truck Bed Rack
  The Venture Tec Overland Truck Bed Rack - Aluminum - 500 lbs # P94FR states it is compatible with tonneau covers that mount inside the bed rails. Based on the height of this product I don't believe it will work with a tri-fold cover. You will need a roll up style hard cover like the BAK Revolver X4s # BAK69ZR or the Pace Edwards Switchblade Metal Retractable Hard Tonneau Cover - Aluminum - Black # 311-SMFA30A61.
  view full answer...
• Will the Rhino-Rack Quick Mount Legs Work With TS Rails for Truck Hero Elevate Rack System
  Yes, the Rhino-Rack Quick Mount Legs part # RRRLT600 should work just fine with the TS (T-Slot) Rails for Truck Hero Elevate Rack System part # TH65FR.
  view full answer...
• Hardware Compatible With Truck Hero TS Rails
  The TS (T-Slot) Rails for Truck Hero Elevate Rack System - Full Size - Short Bed - 72" - Aluminum # TH65FR utilizes the Tie-Down Kit for Truck Hero Elevate Rack System - Qty 4 # TH52FR. This is the directly compatible T-bolt, however is the T-Bolt for TracRac Ladder Racks - 3/8-16 x 1-1/8 - Stainless Steel Item # HD-80122 will fit with the track channel. If you want the nut that fits the track then you can use the Replacement Track Nut for Thule Tracker II Half Foot Pack or Tracker Fit...
  view full answer...
  
• Tonneau Covers and Rack Systems Compatible with TruXedo TS Rails
  Great questions! The Elevate Rack System is available outside of the TruXedo website - we are a great example of that. The TS Rails for TruXedo Elevate Rack System # TH65FR are compatible with a handful of tonneau covers: BAK: G2, MX4, Revolver X2, and Revolver X4 Extang: Encore and Exceed Retrax: One XR with T-slot and Pro with T-slot TruXedo: Lo Pro, Pro X15, Sentry, and Sentry CT It sounds like you have either the Lo Pro or the Pro X15 so you will be able to mount these rails in conjunction...
  view full answer...
  
• Do T-slots of TS Rails for Truck Hero Elevate Rack System # TH65FR fit Standard Roof Rack Feet
  The T-slots of the TS (T-Slot) Rails for Truck Hero Elevate Rack System # TH65FR you referenced were designed to fit the standard roof rack channel dimensions so they will work with Rhino Rack, Thule and Yakima type feet that use the T-slot attachment. Basically any standard roof rack setup that was designed for roof channels is going to fit.
  view full answer...
• Replacement T-Bolt Recommendation for the TruXedo Elevate TS Rails
  The Replacement M8 x 16 mm Rectangular Head T-Bolt for Rhino-Rack Accessories # RR89HB is designed to replace any M8 x 16 mm t-bolt so if the t-bolt on your TS Rails for TruXedo Elevate Rack System # TH65FR has the same measurements it'll work, but it has not been confirmed to be a direct replacement. Another alternative is to use the Replacement T-Bolt for TracRac Ladder Racks # HD-80122 which measures 3/8"-16 x 1-1/8" and will fit in the t-channel.
  view full answer...
• Tonneau Cover for 2020 Ford F-150 6.5' Bed that is TS Rail Compatible
  The Gator Recoil tonneau cover is not listed as being compatible with the TS rails part # TH65FR that you referenced but we have a similar tonneau that is compatible with the # RTT-60374 which fits your 2020 Ford F-150 6-1/2 ft bed.
  view full answer...
• Are T-Bolt Available Separately Which Fit The TS Rails For Truxedo Elevate Rack Systems?
  While we do have some T-Bolts # RR72XB which will fit into the TS Rails for TruXedo Elevate Rack System # TH65FR. I recommend using the hardware which comes with the Tie-Down Kit # TH52FR since the kit comes with 8 T-Bolts as well as washers and nuts. This way you will not have to try and locate compatible washers and nuts depending on your channel mounted accessory.
  view full answer...
• Is There A Weight Capacity for the Tie-Downs On the TS (T-Slot) Rails
  The TS (T-Slot) Rails for Truck Hero Elevate Rack Systems like part # TH65FR can be used for many things such as mounting a ladder rack or using the included tie-downs. I don't have a weight capacity for these tie-downs but they should work to hold most smaller items without issue. If you need to secure heavier objects you should be using the tie-down points inside the truck bed. The TS (T-Slot) Rails for Truck Hero Elevate Rack Systems are bolt-on options which is what makes them so popular.
  view full answer...
• T-Slot Measurements on TS Rails for TruXedo Elevate Rack System
  The T-slot channel on the TS Rails # TH65FR is 1" wide x 1/4" tall and 1/2" wide at the opening on top of the channel. There is no exact size, it just needs to be able to fit the channel. A lot of companies list parts as fitting the "standard size" channel to avoid any confusion by listing the complete dimensions.
  view full answer...
• Can 2022 Ford F-250 with Truxedo Centry and TS Rails Install Yakima Overhaul HD Rack
  With the TruXedo Sentry part # TX1579101 installed on your 2022 Ford F-250 short bed and the TS rails part # TH65FR you would be able to use the Yakima Overhaul HD part # Y01151-5755 without the use of any adapters as this comes with the correct adapter to allow it to attach to the channels that the TS rails provide.
  view full answer...
• Troubleshooting Ladder Rack Fit for 2019 Ford Ranger with G2 Tonneau Cover
  For your 2019 Ford Ranger with Backflip G2 # BAK226332 there is not a specific fit available that will be directly compatible with your 5 foot bed and folding tonneau cover. If it were me, I would get the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000964 knowing it is a fit for a F-150 5 foot 6 inch bed and the rails will need to be trimmed to fit but the vertical pieces will work well with your cover. The Yakima Overhaul you referenced will not be compatible.
  view full answer...
• Fit of T-Slot Rail TH65FR With BAK Tonneau Cover on 2019 Ford Ranger
  The T-Slot rails you mentioned, part # TH65FR are compatible with the following BAK tonneau covers: G2, MX4, Revolver X2, and Revolver X4. I'm,not familiar with the model you specified, but as long as your tonneau mounts to the inside rail of the bed side rather than the top of the bed side, it'll work great.
  view full answer...
• How To Mounts Crossbars On Top of Retrax Tonneau Cover
  The TS (T-Slot) Rails for Truck Hero Elevate Rack System part # TH65FR for short bed or part # TH45FR will allow you to use a rack system on top of any tonneau cover that mounts inside the bed rails like the Retrax. This can then be used with the Rhino-Rack Vortex Crossbar System part # RRVA180B-RRRLT600 which mounts to the rails and provides crossbars atop the tonneau that you can attach most accessories to.
  view full answer...
• How and Where Do the T Slot Rails For Truck Hero Elevate Rack Install
  This is a great question! I reached out to Truxedo/Truck Hero to confirm this, but there is a clamp that goes inside the bed rails that the T Slot Rails for Truck Hero Elevate Rack System # TH65FR will attach with. Unfortunately there is not an online installation guide available for these, but there are instructions included with these rails that show, in detail, how these clamps are installed. This clamp does not interfere with the compatible tonneau covers listed below because of the...
  view full answer...
  
• Are the Truck Hero TS Rails Compatible with the Extang Xceed Tonneau Covers
  The TS Rails for Truck Hero Elevate Rack System part # TH65FR is designed to fit along side of the Extang Xceed Hard Tonneau Cover part # EX47FR bed rails. Your original rails will still be in place and will continue to act as the weather barrier for the system. These will be mounted along side and allow for the attachment of the crossbars or accessories you like.
  view full answer...
• Best Way to Carry Bikes Above Tonneau Cover on 2015 Chevy Silverado 2500 Short Bed
  Thanks for reaching out, I'd be more than happy to help you! For your application I recommend using the Leer Soft Tonneau Cover # LE58VR along with the TS Rails for TruXedo Elevate Rack System # TH65FR. This gives you a soft cover and rails with T-Slots for a rack system. Then to install a roof rack system on the rails I recommend the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers # RRVA180B-RRRLT600. This comes with feet and hardware to fit the TS Rails...
  view full answer...
• Recommended Ladder Rack for a 2021 GMC Sierra 1500 w/ a Gator Tonneau Cover
  I have a great ladder rack for you but the TruXedo Elevate Truck Bed Rack System item # TH65FR is not compatible with your Gator cover. Instead you will want the Adarac Pro Series Custom Truck Bed Ladder Rack item # A4003497. This rack is confirmed to fit your 6-1/2' bed 2021 GMC Sierra 1500. The Adarac has a 500 lbs capacity and mounts inside your stake pockets. This allows it to be compatible with the inside mount style of your Gator tonneau cover and not interfere with its ability...
  view full answer...
• Compatibility of 2022 GMC Sierra 3500 Factory Tonneau Cover With TS Rails and Yakima OverHaul HD
  The TS Rails are compatible with most inside-mount tonneau covers. However, since your current tonneau cover is screwed in I can tell you it won't be compatible. Unfortunately, if you want to use the OverHaul HD # Y01151-5955 with the TS Rails # TH65FR (short bed) or # TH45FR (long bed) you will have to switch to a different tonneau cover. I recommend checking out the TruXedo Lo Pro. If you have the short bed you would need # TX573301 and for the long bed # TX572801. This is compatible...
  view full answer...
• Rack Compatible with the Truck Hero Elevate T-Slot Rack System on a 2021 Silverado w/ MX4 Cover
  The TS (T-Slot) Rails for Truck Hero Elevate Rack System # TH65FR you mentioned will work with the MX4 covers and will allow you to use a rack system that uses t-slot attachments to mount the rack. So there are options from Yakima, Thule and Rhino-Rack available. I like the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 which will allow you to use Rhino-Rack Vortex Aerobar crossbars like the # RRVA200B-2. The Quick Mount legs are a great option because they will allow...
  view full answer...
• Will Yakima Ladder Rack Work with TS Rails for TruXedo Elevate Rack Systems
  Yes, the Yakima OutPost HD Overland Truck Bed Rack with Tonneau Cover Adapter part # Y01152-5855 is compatible with the TS Rails for TruXedo Elevate Rack Systems like part # TH65FR. The channel dimensions are relatively standard so you can use most accessories designed for slots. The Yakima OutPost is a mid height rack, if you're looking for the best of both worlds, mid height and full height I recommend going with the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover...
  view full answer...
• Do the Truck Hero TS Rais Work with the Gator EFX Covers
  Yes the TS Rails for Truck Hero Elevate Rack System part # TH65FR will work out well with your Gator EFX Tonneau Cover. The design of the Gator EFX is very similar to that of the BAKFlip MX4 Hard Tonneau Cover part # BAK448133 which is confirmed to fit with the TS Rails.
  view full answer...
• Recommended Tonneau Cover for 2014 Toyota Tundra with 6-1/2' Bed with T-Slots for Rack
  I recommend going with the TruXedo Lo Pro Soft Roll-up Tonneau Cover on your 2014 Toyota Tundra with 6-1/2' bed, part # TX545801 for models with the deck rail system or part # TX545701 for models without. This is one of the most popular covers available and offered at a great price. It doesn't have t-slots but you can add them with the TS Rails for TruXedo Elevate Rack System part # TH65FR which will then allow you to attach a rack.
  view full answer...
• Will Rhino-Rack Roof Rack for Tracks Fit TruXedo TS Rails on a 2019 Ford F-250 Short Bed
  Yes, the following parts will fit together on your 2019 Ford F-250 Super Duty short bed truck: Rhino-Rack Roof Rack for Tracks - # Y01-140B-NT TS Rails - # TH65FR
  view full answer...

Do you have a question about this Accessories and Part?