Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness

See what our Experts say about this Peterson Tow Bar Wiring

• How Do the Peterson Magnetic Tow Lights Ground
  The Magnetic Tow Lights part # PE26UR ground through the trailer connector and to the vehicle, not through the magnetic base of the light.
  view full answer...
• Wiring Tail Lights on a 2005 Jeep Wrangler to Tow behind a 2008 Nissan Xterra
  We have exactly what you are looking for. The Tail Light Isolating Diode System with Wiring Harness, part # 38955, is used when you want the towed vehicle lighting system to work with the tow vehicle. There is also a video on how to install the kit that I have linked below.
  view full answer...
• Can 2016 Ford Fiesta Be Flat Towed Behind a Motorhome
  According to the information I found in the owner's manual for the 2016 Fiesta, the vehicle can indeed be flat towed. You'll want to look over the procedures outlined on page 152 of the owner's manual, and follow them exactly. The procedures vary according to the transmission that the vehicle is equipped with. I'll link you to some FAQ articles about flat towing, I hope you'll find them helpful.
  view full answer...
• How To Use 7 Way RV Connector To Power Lights And Charge Battery On Towed Vehicle
  I highly recommend installing Hopkins Endurance Multi-Tow Adapter # HM48470. This replaces your RV's 7 way and gives you a 7 way AND 4 way flat connection. Then you can hook upMagnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR directly to the 4 way flat provided on the adapter. These tow lights have a 20 foot long wiring harness; use 48" Long 4-Pole # HM47115 if you need 4 more feet of wiring. For the charge line going to the towed vehicle's battery, you...
  view full answer...
  
• Can a 2012 Honda CR-V with Automatic Transmission be Flat-Towed Behind a Motor Home
  Both the front-wheel-drive and all-wheel-drive versions of the 2012 Honda CR-V with automatic transmission can be flat-towed behind a motor home. Honda cautions that before flat towing your CR-V transmission fluid level and condition be checked. If you will flat tow often or for long periods (8 hours or more at a time), then it is suggested to change your transmission fluid at shorter intervals than specified in the manual. It is also necessary to follow a pre-drive conditioning process...
  view full answer...
• Magnetic Tow Light Kit that Uses 7-Way Connection to Tow Vehicle
  For a magnetic tow light kit that would use a 7-way you'd want the Peterson kit part # PE26UR with the 7-way adapter # HM47365 which you'd plug into the 4-way of the light kit which would then plug into the 7-way of your tow vehicle.
  view full answer...
• Parts Needed to Flat Tow a 2011 Nissan Versa
  A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
  view full answer...
• Recommended Flat Tow Wiring For 2015 Ford F-150 Crew Cab
  There is not a plug and play option with quick connects for your 2015 Ford F-150. The only kit available for your truck that won't require splicing is the Peterson Magnetic Tow Lights - 4-Way Flat Connector - 20' Long Harness Item # PE26UR with the external lights. If you want to use your factory tail lights, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit will use the diodes to protect your factory system while hardwiring your truck to make...
  view full answer...
• How to Route Tow Bar Wiring to Rear of 2019 Kia Soul
  When installing a wiring kit like the Roadmaster Diode Flexo-Coil # RM-15267 on your 2019 Kia Soul the best way to run the wires to the rear tail lights is to route them under the vehicle between the underbody covers, securing it at various locations with zip ties while being sure to avoid any moving parts or areas that emit a lot of heat. I have attached an install video for this particular kit on the 2015 Kia Soul that you can follow along with. If you'd rather not perform this kind...
  view full answer...
• Parts Needed to Flat Tow 2017 Honda HR-V Behind Class C Motorhome
  We can help you equip your 2017 Honda HRV for flat towing behind your motorhome, and there are a number of different parts you will need in order to do this. For base plates I recommend the Roadmaster EZ5 kit # RM-521570-5 that you referenced. This bracket will accommodate any Roadmaster motorhome-mounted tow bar. I recommend their Falcon 2 tow bar # RM-520. For safety cables use # RM-643. For a lighting kit I suggest an inexpensive magnetic light kit like # PE26UR or # TL21RK; these...
  view full answer...
• Recommended Flat Towing Components For 2007 Honda Fit
  Honda states that the Honda Fit should not be flat towed, however, it is possible and there are many people that flat tow their Honda Fits. According to our flat towing authority, to be able to flat tow your Fit, you will want to follow the emergency towing instructions found in the owners manual. Honda lists specific procedures and restrictions, so it's important to follow those procedures and restrictions. If any damage were to occur due to flat towing, the warranty would be voided by...
  view full answer...
• Can Magnetic Tow Lights Be Placed On The Cab Of A 2019 Chevy Colorado When Flat Towing
  Yes, as long as the Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR are visible to other drivers behind you then you can place them at the rear-most position of the cab of your 2019 Chevy Colorado.
  view full answer...
• Recommended Tail Light Wiring For Flat-Towed 2018 Jeep Cherokee With Bike Rack Blocking Taillights
  The 4-pin on the rear of your 2018 Jeep Cherokee Overland wouldn't have power running to it unless it the vehicle was running so the simplest option would be to just bypass the wiring you installed when you plan on flat-towing your vehicle and hauling your bikes and instead using some magnetic lights instead like the Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR or the Custer Lite-It Magnetic Tow Lights # LIW-AGKIT-SG if you would like a wireless connection.
  view full answer...
• Will Magnetic Tow Lights Work With a Supplemental Braking System
  In order to use magnetic tow lights like the Peterson Magnetic Tow Lights part # PE26UR on a towed vehicle you must use a portable braking system like the Blue Ox Patriot Portable Braking System part # BLU37TR. If you want to use a permanent braking system like the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700 you'll also need a direct wire-line harness like the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267.
  view full answer...
• Using Peterson Tow Light Kit, # PE26UR, with a Tow Dolly Already Connected to RV Trailer Connector
  The Roadmaster Tow Dolly with electric brakes, # RM-2050-1, also already has lights on it which is why they did not provide an additional socket for lights. It also has a 4-Way flat trailer connector with extra blue wire for the electric brakes and not a 7-Way. Since your RV has a 7-Way, what I recommend is to change the connector on the tow dolly to a 7-Way, # PK12706, and then you can use the Hopkins mutli-tow adapter, # HM47570. This connector will allow you to plug in the 4-Way on...
  view full answer...
• Magnetic Towing Lights With 4-Way to Replace Damaged Set
  We do carry magnetic towing lights that connect with a 4-way like the ones that were damaged with the lost cap, but no replacement lenses. So, the best option is going to replace yours with a similar set from Optronics or Tow Ready. - Optronics Magnetic Tow Lights # TL21RK - Tow Ready Magnetic Tow Lights # PE26UR I have added links below to video reviews of both options for you to take a look at.
  view full answer...
• Recommended Parts Needed To Flat-Tow 2016 Ford Focus Titanium Hatchback
  There are a few things you need when you are flat-towing a vehicle. It sounds like you have checked yoru owner's manual and have some valuable information. You will need base plates, a tow bar, safety cables, lighting, and a supplemental brake system. And to make sure you tow your Focus level you may need a high-low adapter for the trailer hitch. I will make some recommendations for each item and the battery disconnect. The base plates I recommend for your Focus is the Demco Base Plate...
  view full answer...
• Items Needed When Flat Towing Honda Fit
  You will want to check the owner's manual or with a dealership when you consider flat-towing the Honda Fit. Some manufacturers have restrictions as you mentioned for automatic transmissions versus manual transmissions. From my research I found that many people are flat-towing their Fits but the owner's manual from Honda does state the vehicle is not towable. When flat-towing any vehicle there are 5 items you will need. You will need base plates for the vehicle, a tow bar, safety cables,...
  view full answer...
• Recommended Items Needed When Flat-Towing 2003 Dodge Neon
  Since you have an automatic transmission in your Neon I found that it can be flat-towed but would require a transmission lube pump. When you flat-tow your Neon you will need 5 items. You will need base plates, a tow bar, safety cables, lighting for the Neon, and most states now require a supplemental brake system. The base plates I recommend are The Blue Ox Base Plates, part # BX1961. For a tow bar I recommend the Blue Ox Adventurer, part # BX7322. The safety cables I recommend are...
  view full answer...
• Can a 2011 Ford Fiesta Automatic be Flat Towed Behind a Motor Home
  I did some checking and it looks like a 2011 Ford Fiesta with an automatic transmission is good to tow as is. However, you should check with the owners manual to check for any limitations or recommendations. You will need a few things to accomplish this, the first thing being a Roadmaster EZ2 Base Plate Kit, part # 524425-1. This will install onto your Fiesta and be the attachment point from the tow bars. Next, you will need a RoadMaster Sterling All Terrain Tow Bar, part # RM-576 and...
  view full answer...
• Flat Towing a 2012 Ford Fusion, Parts Recommendation
  The manual transmission 2012 Ford Fusion is a very popular vehicle that can be flat towed without having to install any lube pumps for the transmission or axle disconnects. You will want to start with a base plate kit first. For that you would want the Roadmaster Base Plate kit part # 4420-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon...
  view full answer...
• Parts Needed to Flat Tow a 2014 Hyundai Accent
  I did some checking and it looks like the 2014 Hyundai Accent is only flat towable if it is the manual transmission model. The 2014 Honda Fit can be flat towed with either transmission style but it is not recommended to exceed 65 miles per hour. I would recommend consulting the owners manual of either vehicle or contacting a dealership to be sure. We only carry base plate kits for the Hyundai Accent though. So that might be the deciding factor. If you were to get a manual transmission...
  view full answer...
• Parts Needed to Tow a 2013 Kia Optima on a Tow Dolly
  I checked the online manual for your 2013 Kia Optima and didn't see anything about recreational dolly towing, only emergency dolly towing. While the manual didn't give any distance restrictions for dolly towing it is always best to confirm whether it is safe or not with a Kia dealer. If it is okay then you simply need a tow dolly and then some lights. Tow dollies tend to have lights on them but it helps to have some extra lights to make sure people around you can tell what you are doing. For...
  view full answer...
• Base Plates for Flat Towing 2014 Ford Fusion SE Hybrid
  The base plate fits for your 2014 Ford Fusion Hybrid will depend on the version of the vehicle that you have. If you have the SE model (with no adaptive cruise control) you can use Blue Ox Base Plate Kit # BX2646. All base plate fits are shown on the linked page. Select your SE Hybrid vehicle style from the drop-down menu to see your options. (Choose either SE Hybrid with adaptive cruise control or without it.) The linked article on flat towing will give you information on all of the...
  view full answer...

Do you have a question about this Tow Bar Wiring?