Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
(734 reviews)
Price: $431.23
In Stock
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
Retail:$575.95
Our Price: $431.23
You Save: $144.72
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meCustomers prefer these similar products
100% prefer this
- All Info
- Reviews (734)
- Q & A (0)
- Photos
Furrion RV Camera System
- Backup Camera
- Observation Camera
- 4.3 Inch Display
- Furrion
- Wireless Signal
- Built-In Microphone
- Touch Screen
- Anti-Glare
- Mirrored Image
- Night Vision
- Motion Detecting
- Waterproof
- 1 Camera
- Dashboard Mounting Bracket
- Suction Cup Mount
- Below Rear Clearance
- 120 Degrees
The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.
Features:
- Wireless backup camera system improves rear-view visibility for your RV or camper
- Minimizes blind spots and helps prevent accidents
- Included CMOS camera creates clear digital video in full color
- 120-Degree viewing angle gives you optimum visibility
- Integrated motion sensors trigger the monitor to turn on
- Integrated IR cut filter blocks out infrared light during the day to capture natural-looking images
- 8 Infrared LEDs surround the camera lens to provide nighttime vision up to 16'
- 4.3" Full-color LCD touch screen monitor has color-coded, rear assist marker lines that show distance from other objects
- Auto-dimming, anti-glare screen is easy to see in any lighting condition
- Brightness, color, contrast, and image orientation can be easily adjusted
- Auto-off setting powers down the monitor after 10, 20, or 30 seconds
- Integrated microphone and speaker make it easy to get help backing up
- Microphone on camera picks up your friend's voice outside the RV
- Speakers on monitor let you clearly hear your friend's instructions
- Built-in digital transmitter offers high-quality, uninterrupted video up to 492' away
- Eliminates interference from smartphones, routers, and other devices
- Durable metal housing is waterproof and dust resistant
- IP65-rated to protect against dust and low-pressure water jet sprays
- Simple installation - minimal drilling required
- Monitor suction cups to your windshield
- Camera mounts to the rear of your RV or camper
- 1 Camera, monitor, 1 monitor mount, 12V DC power cord, 6' camera power cable, antennas, zip ties, and mounting screws are included
Specs:
- Monitor dimensions: 4-3/4" wide x 3-1/8" tall x 1" deep
- Screen size: 4-5/16"
- Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
- Mounting hole spacing (center to center):
- Horizontally: 3-3/4"
- Vertically: 15/16"
- Mounting hole spacing (center to center):
- Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
- Resolution:
- Monitor: 480 x 272
- Camera: 720 x 480
- Wireless range: 492'
- Voltage: 12V - 24V DC
- Camera cable length: 6'
- 1-Year warranty
Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.
After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system gives you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.
Monitor the Rear of Your RV
If you're set up at the campsite for the weekend, the motion sensor will automatically power the touchscreen monitor on if they sense movement in the form of a prowling animal or person.
Easily Communicate from Outside Your RV
Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.
Avoid Collisions While Backing Up
No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.
And because this camera has 8 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 16' should you arrive at the campsite after dark and need to back up into your parking spot. And during the day, the integrated IR cut filter blocks out the infrared light during the day so you'll still be able to have crips, natural-looking images.
Withstand Multiple Climates and Environments
If it's raining out, or if you just simply need to wash your RV, the waterproof, IP65-rated camera will be protected against low-pressure water jet sprays. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.
Installs Onto Your Windshield and RV Rear
This camera system includes a suction cup mount that you can use to stick the monitor onto your dashboard or windshield. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.
Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. Just bolt the camera down with the included mounting screws and connect to your RV's reverse lights. Be sure that the camera won't interfere with any slide outs or other moving components. If you intend to use this system only for backing up, wire the camera to the reverse lights. If you prefer to use it to keep an eye on your rig on the highway, wire the camera to the running lights.
729125 Furrion Vision S Wireless RV Backup Camera System for RVs - Night Vision - 4.3" Screen
Replaces FOS48TAPK-BL
Replaces 729125
Alt 405211ET
Alt 110423
Item # FOS43TASF
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen - FOS43TASF
Average Customer Rating: 4.7 out of 5 stars (734 Customer Reviews)
The camera system's monitor screen reduces glare when you're driving to the campsite on a bright, sunny day. Motion sensor automatically powers the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.by: Richard 04/25/2024
My trailer was prewired for the Furrion camera so it was truly a plug and play install. Haven’t used it yet but everything works as it should.
by: Otto04/13/2024
I want to love this, but frankly I have consistent video dropout and lag issues towing a 26-foot GD Imagine trailer in various weather conditions. I tried fully disconnecting and resetting, repositioning antennas, and praying to the antenna gods, but it's only good for about two-thirds of the time. I think "YES, finally!" and then it starts dropping out again, making me insane. Also, as far as I can tell, there is no real good antenna upgrade for this. I suspect if you have a shorter trailer, or some fancy way to beef up the signal you'll do better.
by: Brian 04/07/2023
This camera has been great. I can keep an eye on our bikes that are on the back of our camper. I like that I can see how close drivers are behind me and I can see when I've cleared a vehicle that I just passed.
Brian
4/8/2024
Still working great. Does exactly what I was hoping it would do.
by: William 05/05/2024
Camera system works as advertised! Easy install. Happy with the purchase.
by: Randy S10/13/2017
Camera works as advertised. Wired camera into running lights 5th wheel. Took about 45 min to layout, drill, pull wire, caulk, and mount.
I did install 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord on both camera and receiver.
Receiver took about 20 min to install. I routed wires nicely, add choke rings.
I have 4 bars running 60 mph. Great purchase and very pleased.
Randy S.
10/13/2018
Camera and receivers still working great. Only issue is antenna broke on camera. Purchased aftermarket router antenna 18”. Still have 4 bars.
by: Rick04/10/2019
We purchased the Furrion FOS43TASF to use as an observation camera while towing our new 2018 26' Jayco Jay Flight travel trailer. Our Jayco came equipped with a pre-wired mount for the Furrion camera. The pre-wired black female cord for the camera was present but someone at the factory forgot to wire it to power, so when I plugged in the camera, there was no juice... I removed the center clearance light on the back of the trailer, used the supplied power cord and to feed in/splice in from the clearance light. Installation only took about 15 minutes. We already made our first trip this season and the camera worked wonderful. Great picture, no delays, very happy being able to see what's in the back and coming along the sides. We didn't use the monitor mount supplied with the Furrion, instead we used a vent phone mount I had for my phone that worked perfectly. This is our second and the best observation camera for towing a trailer we've experienced. The first one was another brand on different travel trailer we just sold. Our experience with that camera was poor picture quality, delays and blackouts. We definitely would recommend the Furrion FOS43TASF.
by: GT01/04/2019
We received our Furrion Observation Camera, FOS43TASF, quickly as advertised. Our camera arrived with no damage. Installation was fast and easy on our 2018, Grand Design, Imagine, 2600RB, plug and play with the existing mount. It took maybe 20 - 30 minutes at the most to install, pair and make minor adjustments. The camera and viewer paired immediately when power was turned on. The camera turned on when the trailer parking lights were turned on. Positioned the camera so the spare tire could be seen on the observation screen to give a point of reference to the back of the camper. Received a strong signal on the pairing. We haven't driven the camper on the road yet to give a review on the workings of the the unit but, don't expect any problems. Should be a good safety feature to know what is behind us when towing. Very happy with our purchase and would recommend this product. This product from etrailer was the least expensive price I could find while researching price points. Thank you etrailer.
by: Robert 07/02/2023
Good system. Only issue is my 2022 Silverado 2500, needed an additional power plug to use. When purchased through etrailer I always receive an error about my trailer light. No issues with lights. Additional REQUIRED power adapter has an issue.
by: Harry r.05/15/2018
This rear observation system was exactly what I needed to give me some eyes in the back of my towable trailer. The system communicates with a 4 bars of strength using a wireless signal between the camera, located at the back of my 24 foot long (2401RG Minnie Winnebago) trailer, and the monitor mounted in the cab of my Ford F150 XLT.
The installation was easy and only took about an hour at most.
I located the two wires feeding the center clearance light near the top of the trailer and through a new drilled hole just below the light I was able to feed in/splice in, the camera wires to get the power the camera needed. (Tip. Before this I used a pair of 6V batteries in series to get temporary power to the camera to ensure good signal back to the monitor in the truck and that a good rear view was possible from the intended mounting spot). Now I can see from the trailer's back bumper to about 35 feet behind on the road.
As usual the Etrailer team was helpful and the order arrived quickly and correctly.
Great Job Julie H. for the last minute assist to correct my order.
by: Niel07/28/2023
Installation took 10 minutes, literally. already paired and my trailer had the mount installed. turn on parking lights and everything worked. Aiming camera took one minute. Now I can see who is behind me while driving.
Backing into a campsite just got way easier as well.
by: Dale 08/14/2023
It's a good product. The camera lights are non-glare light blue, but they really show everything very well in the dark. Our trailer is 23ft. and the signal gets to the truck dash board from the back of the trailer quite well.
by: Richard05/26/2018
I needed a way to see my Indian motorcycle on a trailer behind my 40’ fifth wheel. I had Fords system when I bought my new truck, but there was much more wiring than I wanted to tackle and I was hoping for a non wired system. I bought this with my fingers crossed. Very easy installation of less than an hour and the results were what I wanted
by: Rod V09/07/2018
Super easy install if your unit is already equipped with the mounting bracket from the factory. The only thing I was not impressed with was the monitor mount. Quite restrictive if your dash is a grained texture you are pretty much restricted to mounting on the windshield which I found a bit annoying. I happened to have a CD slot mount, and we never use the CD player so I tried it. Couldn’t have found a better location!!
by: Loren 06/29/2023
Super easy installation on a camper that already had the underlying Furrion power supply wire. Great quality picture and audio. Highly recommend this for the price!
by: Kimberly 03/21/2024
Looks easy enough to install based on already docking base in RV. Thanks for the great service.
by: Randy 10/15/2021
I love this camera! It is so much better than I originally thought it would be. I use it for my rearview mirror when traveling, I can see who is behind my Camper and I don't have to use the add on mirrors on my tow vehicle anymore because I can see now with the backup camera in the rear blind spot and the rest with my tow vehicles mirrors. I also can now back my travel trailer into the campsites without my wifes help and do that with only one try. It has been such a nice experience using this camera system.
Randy
10/15/2022
I still love it! It is still awesome, I would not want to go camping without it. It has made my camping experience so much more pleasurable. If you don’t have one of these I highly recommend you get one .
by: Jeff M04/23/2020
I like it a lot I double a travel trailer and a atv trailer it helps me keep a eye on the trailer behind the camper and is great for changing lanes. The only thing I would do different is get the bigger monitor.
Thanks
by: Rey 02/11/2024
Works great
by: John H01/05/2023
The RV back up camera work great once I got it hook up. But at the RV dealer and manufactory said was pre wire and had a cover with plug and play. Yell right I tried plug and play but was not the case the plug was there but had to hard wire in and do everything to splice the cable in to get to work. Just Lazy manufactory's this day and time. I'm sure the dealer assume it was wire in. I Have a new 2022 Cameo by Cross Roads that builds Red Woods I hate to know I pay $180,000.00 heck my RV was listed for $118,000.00. But over all the Furrion Vision S Wireless RV Backup Camera System works Great. Just be aware of the Lazy manufactory's anymore. I didn't take any pictures didn't have time after 15 min's turned in to 2 hours.
by: Mark 11/29/2022
The camera was easy to install. I just removed the preinstalled camera mount cover that came with the trailer. The window suction in the truck works great. I love how I can now see behind me when travelling. Also seeing what's behind me when backing up. I would recommend this camera. It is a wonderful asset.
by: Oasis Du12/11/2023
To easy to install!! thank you!
by: Ruidoso01/05/2022
If you own a 22 1/2' trailer and a SUV for towing you will find the range of the signal at its max with communication between camera and receiver. Meaning many times the signal is lost or there is a delay in the image. A vehicle will already be at your driver's side door when it shows up at your bumper on the screen. The view is VERY bubbled. Other than that LOVE LOVE LOVE it! Very helpful when it comes to backing up and hearing the individual assisting with instructions. No yelling needed and no disturbing your neighbors when parking.
Jenny N.
1/6/2022
I recommend adding part # WVOSAPANTEXT to help boost the signal of the camera.
Helpful Links
by: Roger G.03/17/2018
Installed it on my new fifth wheel on the same day I got it. It paired up fast and has a great easy to see monitor. The only thing I need to look at is the power wire that was run from the trailer factory. The power comes on from the battery switch. I need to find away to turn it off when not use. If no switch, I need to put one in. Don’t need that draw on the batteries when not in use.
Roger G.
3/18/2019
It’s a great product and has already saved me several hundreds of dollars by catching problems with my second trailer just behind my fifth wheel.
by: Robert04/21/2019
Everything I needed to add to my trailer. Even though the trailer came already prepped for the Furrion equipment, everything I would have needed was there. I had to find out how my travel trailer was pre-wired to feed power to the camera. My trailer was wired to the lights circuit, but did not connect with the automatic light setting, I had to switch on the lights. Can't wait to try it out on my next trip and return parking. Crossing my fingers.
Robert
4/22/2020
After 1st year it is great. I have a hard turn to back into my yard from a busy street. Able to get it done in normally 1 try. Thumbs up.
by: Bradb02/26/2020
I have the camera on the back of a travel trailer. Having a view of the road behind the trailer is indispensible and I am amazed that they are not legally required. I can also see my bikes on the back rack. The only reason I downgrade it one star is because the suction cup for the monitor in the truck often falls off the windshield.
Bradb
2/27/2021
Good camera. I gave up on the suction cup and prop the monitor up on the console, which is not ideal. It is almost impossible to see with sunglasses on.
25
734
Show More Reviews
See what our Experts say about this Furrion RV Camera System
- Furrion FOS07TASF Installation on Prewired Trailer Without Furrion BracketThe Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF is the complete plug and play system for a prewired coach. It sounds like your 2019 Coachman Chaparrell 30RL is roughly prewired for a camera but there is nothing from the manufacturer that specifies the Furrion model. You will wan to add the Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems - Black - Qty 1 # FRCBRKT-BL to get the correct mount...
view full answer...
- How to Mute the Furrion Vison S Camera SystemIn order to mute the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF or 5" Screen # FOS05TASF you press down on the volume button all the way.
view full answer...
- Can a Furrion Wireless Backup Camera and Observation System Be Used with GM Infotainment System?I have a solution for you, but GM has made it so that only the IntelliHaul Echo Master cameras are wirelessly compatible with their Infotainment systems and we haven't come across any aftermarket wireless observation system for RVs that can be paired with these sytems. With that being said, there are some bonuses that come along with using a Furrion system like the # FCE48TASL-05 (5" monitor) which has the rear camera and monitor, as well as side marker light cameras. These side view...
view full answer... - Recommended Furrion Camera and Monitor for 2018 Crossroads Zinger Travel TrailerFor the older Furrion camera, the Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR you asked about is not compatible. The Furrion camera will need to be removed to get numbers off it and cross-referenced with Furrion, but The Vision 1 or Vision 2 do not work with the Vision S monitor which is the most recent version that replaced the others. Unless you can find the correct monitor used from someone you will want to replace the system with the current version....
view full answer...
- How Does the Furrion Vision S Camera Connect to the Shark Fin Mounting Bracket?The good news is since your camper already has already been pre-wired to accept a camera, the hard part is already done. All you'd need to do now is physically connect the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF to the power wire (which can be found inside the Shark Fin camera mount FRCBRKT-BL). From here, your camera should begin to pair as soon as both the monitor and camera get power. After the camera and the monitor are paired, you'll be good to go.
view full answer... - Backup Camera and Observation System for 2021 Keystone Bullet Crossfire 1850RBIf your 2021 Keystone Bullet Crossfire 1850RB is not pre-wired for a backup camera that means you'd be able to install basically any kit that comes with a mount like the Furrion part # FOS43TASF that you referenced. I really like the Furrion setups as they have the best reception and are very reliable so this would be what I would recommend. If you prefer a larger monitor and want side cameras too the # FCE48TASL-05 would work great. You could also go with the larger camera without the...
view full answer... - No Wires Found On A 2021 Forest River Wildwood Heritage Glen With The Camera Prep Package There is not any antenna wiring associated with the Furrion Vision S # FOS43TASF. If there is not a wire already run for your 2021 Forest River Wildwood Heritage Glen, then you will need to wire your camera to either the running lights circuit, or the backup circuit. If this kit does not come with a bracket, you're also going to need the Replacement Shark Fin Camera Mounting Bracket # FRCBRKT-BL.
view full answer... - Troubleshooting Signal Issues With A Furrion Vision S RV Camera System And 2016 Chevy TahoeIf you're having pairing issues with the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF then you most likely aren't receiving enough power at the camera from the Tahoe's 7-way connection. There are two solutions to this issue: Option 1: By using the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera # FR87PR. This adapter will send a steady current to the camera allowing you to receive a signal to your monitor. The male end will...
view full answer... - Best Observation Camera for 2019 Grand Design Imagine TrailerYour 2019 Grand Design Imagine XLS 21BHE should be pre-wired for use with a Furrion observation camera so the best option is the Furrion RV Observation Camera System w/ Monitor and Bracket # FOS05TASF which has a 5-inch screen. These camera systems are the best option because they are not only highly effective but also easy to use and set up in a pre-wired trailer. The Furrion Observation camera system has a camera that has a shaded design so glare in the bright sun won't be a problem,...
view full answer... - Furrion Vision S Wireless RV Backup Camera System For 2021 Keystone PassportIf your 2021 keystone passport was sold to you with the understanding that it is prewired, the shark fin camera base is already installed, for the Furrion Vision S Wireless RV Backup Camera System, # FOS43TASF but the wires are not there, I suggest you contact your salesperson. Please note the attached product review and installation video, this shows for a prewired arrangement is at the 5 minute mark. If you do not have this available, the kit does come with the needed wiring (see attached...
view full answer...
- Can More than One Furrion Camera Pair to Furrion MonitorYes, since the cameras pair to the monitor you can pair more than one to the same monitor with the Furrion RV Observation Camera System # FOS43TASF. For additional cameras we have the part # FCN48TASF.
view full answer... - Troubleshooting Furrion Vision S Camera That Lost Pair to MonitorCheck the position of the antenna on the top of the camera and make sure it's pointed up and also make sure it's still there. If you need a replacement antenna you'd want the part # 772577.
view full answer... - Is There a Back-Up Camera for a Pre-Wired Montana High Country That Uses the Truck MonitorThere is only one system that will work on your 2017 Montana High Country with the factory pre-wiring, the Furrion Vision S Wireless RV Backup Camera System. This system is offered with a 4.3" monitor part # FOS43TASF or a 5" monitor part # FOS05TASF. These systems both use their own monitor, not the factory monitor. I am also not aware of a backup camera system for a trailer that works with the factory monitor on the truck let alone one that a trailer is pre-wired for from the factory...
view full answer... - Correct Furrion Monitor for a 2019 Grand Design Trailer with Pre-WiringThe factory pre-wired Furrion setup does not include the camera. It looks like there is a camera present at first glance but upon further inspection you will see there is only a mounting bracket installed, not a camera and mounting bracket. Therefore, you will need this as well as the monitor so basically the whole kit as that is how they are sold. The Furrion Vision S Wireless RV Backup Camera System is offered with a 4.3" monitor part # FOS43TASF or 5" monitor part # FOS05TASF. These...
view full answer... - Is Suction Cup Mount For Furrion Vision S 5" Monitor The Same As The Mount For The 4.3" Monitor?I have another option for you, but the Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera System # LC776462 for the 4.3" monitors found in the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF is not the same as what the 5" monitor system uses. For the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF you will need the Replacement Suction Cup Mount # FR79SR instead. I included videos...
view full answer... - Monitor Size of Furrion Vision S Wireless Backup Camera SystemI have added a cut out which shows the dimensions of the monitor of the Furrion Vision S Wireless RV Backup Camera System with Night Vision - Rear Mount - 4.3" Screen # FOS43TASF. Overall, the monitor is 4-3/4 inches wide, 2-1/8 inches tall, and 1 inch deep.
view full answer...
- Recommended Option To Prevent A Bumper-Pull Trailer From Hitting Your Bumper The monitoring systems we offer, including the Cub CU62XR you were looking at, would detect the trailer at a slight angle so it wouldn't really be useful in your situation since it would activate too soon and not really prevent you from jackknifing and touching the bumper. These systems also will typically require you to be travelling at 15mph so backing in a space wouldn't really meet these requirements. The best solution would be to install a camera, like the Furrion Vision S Wireless...
view full answer... - Which RV Observation System Fits Camper without Pre-Wiring BestThe Wisight for Pre-Wired RVs part # ASA24YR that you referenced requires the a Voyager only connector that we can't get any type of adapter for so your best option would be the Furrion Vision S part # FOS43TASF which just needs to wire to the running light circuit of the trailer instead so if your RV wasn't pre-wired it would be the easier and better solution. The Furrion kits have the best signal and reception too which is why we recommend them so highly.
view full answer... - Furrion Vision S Wireless RV Back Up Camera Power TroubleshootingFor your # FOS43TASF camera system the first thing I recommend checking is to make sure you have no blown fuses and that the camera is properly wired into your RV and that you're receiving power to the camera using a multimeter. I've attached a video that goes over installation of the camera and using the monitor. The next Step is to use a # FR87PR or splice in the # VGR64VR to boost the power running to your camera. If after that your camera still isn't powering up for you then you could...
view full answer... - Do Furrion Vision S Systems have Power Buttons for Cameras and MonitorsThe Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF that you referenced does not have a power switch. Any time the camera or the monitor has power the system will turn on.
view full answer... - RV Observation System with Better Reception than Furrion Vision SThere's really only one wireless RV observation system that has excellent range that I can basically guarantee will work well with the Furrion Vision S systems like the part # FOS43TASF. I wouldn't say the Hopkins VueSmart is bad but it does not have as strong of a reception range.
view full answer... - Troubleshooting Power Source for Furrion Vision S Wireless RV Backup CameraWhat I think you are stating is that with the Furrion Vision S Wireless RV Backup Camera, # FOS43TASF, everything is working as is should when the monitor is connected to the tow vehicle for power source. In this connection, the system works as intended because it designed to work with your backup lights/circuitry. This is designed to be a back-up camera viewed from the cab of tow vehicle.
view full answer... - Furrion Vision S or Hopkins VueSMART for 2021 Geo Pro Camera SystemTo use the VueSMART part # HM34FR on an RV that was pre-wired for a Furrion system would only require you to remove the mounting bracket and cut off the wiring harness to reveal the two wires that ran to it and then wire to the two wires of the VueSMART. It would be basically just that simple. The Furrion Vision S system like part # FOS43TASF would be the easiest install since it would attach directly to your current mount and wiring without any modification. Plus this system has the...
view full answer... - How To Pair Furrion Vision S Wireless RV Backup CameraIn response to your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF, this is actually not a pairing issue. The problem being is that the 2021+ GM trucks do not have the correct power sent on the running light circuit to power the Vision S. Furrion is currently working on an adapter to resolve this issue, and our team is working on getting an update when we should receive this adapter. As of right now, there is no way to get this issue fixed without completely...
view full answer...
Do you have a question about this RV Camera System?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Jacob T
Installed by:
Kathleen M
Installed by:
Cole B
Video by:
Dustin K
Video by:
Jonathan Y
Video by:
Michael B
Video by:
Thomas T
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Adam Y
Updated by:
Noah M
Edited by:
Amanda M
Test Fit:
Shane H
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Kevin C
Written by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/15/2024
We have found that you can use part # WVOSAPANTEXT to help boost the antenna signal. Also making sure that the antenna is as high as possible will help.