Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Protect just about any trailer from theft with this universal coupler lock, which uses a unique "ball" and shackle to fit a variety of coupler sizes and styles. Secures trailer when it is not in tow.
Features:
Specs:
This close-up bottom view shows the solid steel bolt in the locked position where it would engage the shackle. (The shackle has been removed to show the bolt.)
The above images show the lock in use on several types of trailer couplers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Kevin Bross: Today, we're going to be taking a look at the Fastway Universal Coupler lock. The universal design is going to protect most trailers from being towed away, so it's designed to provide maximum security for your unattended trailer. It's going to protect it from theft. It's going to use a multi-step uniball that fits into any size ball coupler. This piece is of solid construction. It's not hollow like similar designs and models, and the shackle has a really nice, unique bend.
This is a reversible design that allows it to snug up tight to most types of couplers or coupler latches, including all the ones that you see here on the table, such as A frame, straight channel, round tongue, flat plate and surge type couplers. It's also going to accommodate a variety of latching mechanisms, such as trigger, pin, thumb and wrap around yoke latches. It works great on all the ones that you see here on the table. Really nice universal design that's going to provide maximum security to your unattended trailer. The unit features a tube key lock cylinder that provides better security than standard key mechanisms. It's a lot harder to pick, and it's more difficult to duplicate keys.
It's also going to feature an anti-drill pin that discourages attempts to drill out the lock. The unit's also going to feature bolt blocked locking system to prevent thieves from prying the lock open. Inside this hole right there, there's going to be a small bolt that engages the shackle. Right now, it would be in the unlocked position, and you can see how that comes out just a little bit. It doesn't take much to secure the unit.
That bolt that runs through there engages the grooves on the shackle to keep it from being pried off of the trailer coupler. Now when it comes to the construction, we're looking at a hardened steel construction when it comes to the shackle. It's going to provide maximum cut resistance, chrome plated finish, does a great job at resisting rusting corrosion, and then we're looking at a solid die cast corrosion resistant housing that's very strong and very durable. Two keys are included per lock. They are numbered, so the keys are going to be unique to the universal lock that you chose. This is going to fit 1 7/8 inch, 2 inch and 2 5/16 inch ball couplers.
You just need to make sure that the coupler width does not exceed 4 1/2 inches, the shackle diameter is 5/8 inch and the unit's going to be covered with a limited lifetime warranty. I just wanted to show you how it installs and how easy it is to use. What you'll need to do is separate the two components, so just move it to the unlocked position. It also has a nice dust cap that protects that lock opening. It's going to do a great job at keeping out dirt and moisture. When you're ready to use it, all you need to do is make sure that the coupler is in the open position. Ball portion goes in there, and then all you've got to do is secure it just as if you're hooking up to your hitch ball. Then install the shackle, so you need to determine which way's going to work best for your application. For this one, I just want to make sure that the point is pointing back towards the trailer. It is a universal design, that way you can adjust it however you need to use the lock to fit your application the best. Then we just move it to an unlocked position, allow that shackle to go down as far as possible, move the key to the locked position and it removes from the core. Place on the dust cap, and that's on there. It's not going to come off. The only way to get it off is to use one of the two keys to unlock the unit. That's going to do it for today's look at the Fastway Universal Coupler Lock.
Average Customer Rating: 4.7 out of 5 stars (909 Customer Reviews)
Protect just about any trailer from theft with this universal coupler lock, which uses a unique "ball" and shackle to fit a variety of coupler sizes and styles. Secures trailer when it is not in tow.Water/snow collects on top and freezes lock requiring a torch to thaw out to open. Rusting inside as well.
Gavin
7/4/2023
I purchased about 20 of these for a fleet of company trailers. They wont perform well in wintry climates. You will need a torch to unfreeze them. Otherwise perform as advertised.
This coupler lock appears to be made very well. Strong with a good heavy duty weight. Easy to install
I purchased about 20 of these so our entire fleet of trailers would have matching locks. While they work OK during warm weather, these are no good in cold climates. They will freeze where the top pieces slides into the bottom and you will need a torch to get them a part. I am sorry I went with these in our climate.
Wont know if it works until the locals try to steal my trailer
I received exactly what I ordered. The 2 hitch locks fit perfect to deter theft. Staff were extremely friendly and knowledgeable locating the right fit. This is not my first purchase from etrailer, nor my last.
Great product. Looks like it will work on both trailers, better than a padlock.
Works really well
Mike
3/25/2019
Still working well
Easy to install and remove. Much sturdier than other locks I’ve used.
Fast Great service
Great products. Very convenient to have all my trailers locked and using only one key
These trailer coupler locks are great, easy to install and easy to take off. More than pleased the product and the shipping! Thanks guys, keep up the good work!
I still have my trailer so I'm guessing the lock works.
Works great. I park my trailer in public areas on occasion. It hasn't gotten ripped off yet!
I already have this lock, wanted another for my camper I think it was great I could order another with the same key code, I have 2 locks and use same key. Awesome.
Seems sturdy. Unfortunately Fastway is one of those companies that thinks it is necessary to collect marketing information for you to complete warranty registration. Minus 1 star for that.
I have not installed the lock on the trailer yet! My trailer is available! From what I can see the lock looks very strong and easy to use! I'm sure looking forward to using the lock! It should provide excellent security!
As always, e-tailer delivers a quality product at a reasonable price with quick shipping. I like the option to purchase Coupler locks that are keyed the same.
I own 3 of them, nice thing was I was able to order all 3 with the same key. Simple to use and adds sense of security.
This is one serious coupler lock. If anybody manages to steal my boat they will have earned it.
Best quality coupler lock on the market. Also priced fair!
Ball not as big as it should be and had to shim it. Tricky to get it tight enough to stay on my trailer hitch. Very heavy duty and seems to do the job.
Do you have a question about this Trailer Tongue Lock?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
7/7/2022
I would regularly spray this lock and others with lubricants to prevent sticking and keep it rust free. Here are other suggestions in this help article:
Helpful Links
faq-rust-prevention-maintenance.aspx