Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(155 reviews)
Price: $194.37
In Stock
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # DT24959
Retail:$300.14
Our Price: $194.37
You Save: $105.77
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (155)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - DT24959
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 200 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
24959 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe - 1-1/4"
Replaces 24886
Installation Details
This Product Fits The Following Vehicles
- 2016 - 2017 Subaru Crosstrek Hybrid models
- 2016 - 2017 Subaru Crosstrek non-Hybrid models
- 2008 - 2024 Subaru Impreza 5-Door Wagon with Single Exhaust
- 2013 - 2013 Subaru XV Crosstrek
- 2014 - 2015 Subaru XV Crosstrek Hybrid models
- 2014 - 2015 Subaru XV Crosstrek non-Hybrid models
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - DT24959
Average Customer Rating: 4.8 out of 5 stars (155 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: Mark08/09/2022
The item was shipped on time, and specs were precisely as indicated on the website. The install perfectly followed the online instructional videos. All went smoothly. Hitch mounted bike rack is now installed, in use!
by: Shawn07/17/2022
Clean fit. Great [online]videos demonstrating installation.
Shawn
7/17/2023
No complaints. Tows boat trailer without any problems.
by: Subaru Imprezza Hitch and Bike Rack07/20/2017
2012 Subaru Impreza
Fits snugly under bumper. I had it installed for me, so can't comment on the installation process. Just what I needed! Swagman bike rack and Draw Tite hitch are well made and very sturdy.
Subaru R.
7/20/2018
All working well
by: Pnw rider07/29/2023
2008 Subaru Impreza
2008 impreza 2.5i (non turbo). Great fit. No hole cutting required. Exhaust drop is best done with a helper. Video on [online] is very helpful. I recommend raising rear end with ramps or lift.
by: Louis V05/11/2019
Overall trailer hitch is as advertised. Good quality construction/ welds look good. Priced right. Shipped OK/ arrived no issues.
Installation was a bit tough. Videos were extremely helpful and a must to understand the order of bolt/ spacer block installation. The written instructions were of no help just to verify torque settings.
Two points of issue. The forward most bolt (one drivers side/ one passengers side) is juuuusssst that much too short. The kit supplied 4 -1.5" grade 5 carriage bolts but there really should be 2 - 1.75" or 2" bolts for those forward most holes because once you add the flat washer + the lock washer + the spacer in the frame and the spacer between the frame/ hitch it is impossible to screw the nut on. See attached pictures
Also, once installed and put to use, the Thule bike rack bolt that goes thru the hitch could not be tightened w/ the Thule wrench. The trailer hitch chain loops would not allow. A ratchet w/ 3/4" socket will need to be kept in the car for the Mrs to tighten when using the bike rack.
Hitch looks good and is installed and operational. Thank you
by: Rodney K05/01/2019
Chevrolet Colorado
A solid hitch that the do-it-yourselfer can install. Bolted right onto the daughter's Subaru. Bike rack has never been out of the hitch since the install(the bike gets keep in the car sometimes for safety!) Very happy customer! Since college graduation last spring- car, hitch, bike rack, and bike have been from Maine to California with Utah and Colorado stops and now a job in Vermont! Everything works great! Thanks for a great product making people happy.
by: Jeffery 03/01/2024
2015 Subaru Impreza
Bolted on easily and was a perfect fit. I put it on a 2015 Subaru impreza and use ito tow a 5x8 ft trailer .
by: Richard06/11/2018
2017 Subaru XV Crosstrek
Product shipped fast but packaging could be a little better. The box was heavy duty but the hitch was put in there with no secondary protection so it arrived scuffed up from the cardboard. There were also a fair amount of chips in the paint but I run a powder coat shop and blasted it and applied a zinc primer anyways to withstand the salt and brines they put on our Minnesota roads in the winter so this didn't bother me. The factory powder coat on this was pretty average but I understand not everyone is willing to shell out extra cash for better paint and just want a functional hitch for a fair price. Installation was straightforward and a breeze. No need to drill any extra holes on my 2017 Crosstrek. Two people make mounting the hitch a lot easier so you don't knock the bolts back into the frame rail. Overall fit was spot on and should do me just fine.
by: Keaton07/05/2020
2016 Subaru Crosstrek
Great hitch for Subaru Crosstrek. I use it to put a tray style bike rack on the back. Easy install, I had no issues with the length of the bolts as other customers have mentioned. Also did not have to drill out the holes in the frame on my 2016 Crosstrek. Included bolt fishing wire makes it a breeze to install. If you do it solo, might want to have a hydraulic jack to hold the hitch in place while you bolt it on. Have not tried it for towing, but it looks like it's built solid. Arrived super quickly from etrailer.com, highly recommend!
by: Paul P.11/29/2017
2017 Subaru Impreza
Excellent product. Fits perfect for the 2017 Impreza. Could be a bit more snug up to the bumper but very happy with it overall. The front bolt could be longer as others have mentioned. I would suggest installing the rear bolts first and then the front ones.
Also, wish the receiver stop was a bit further back so that my rack would sit closer to the bumper, but overall very happy with it.
by: Tim 02/21/2024
2015 Subaru Impreza
Hitch arrived promptly; installation was not difficult and the 'how-to' video was invaluable.
by: Lue09/14/2022
2015 Subaru Impreza
I haven't installed the part yet, however the part came in delivered with no packing material but the cardboard box to protect the part. The powder coat finish was chipped off in several areas so I'll have to touch up with paint to prevent any future rust. There was was also a blob of powder coat piled up in one area that won't be visible when installed, however it just looks unappealing.
by: stuart s 09/05/2019
Installation instructions were good. Took about 1.5hrs to install. You will need a second set of hands. Works great. No issues. Good price. Fit my Subaru Impreza perfectly.
Stuart S.
9/6/2020
Works great. Ive used it multiple times. No issues
by: Gaspar04/27/2022
This worked wonderfully for our Subaru Crosstrek. I was able to install it myself and we have used it many times over the last year. We have a Thule bike rack that holds 2 bikes and we have taken our bikes to the river and beach several times.
Gaspar
4/28/2023
This has held up great over the year. All the bolts are still tight and there is no rust so it still looks the same.
by: Kandra05/16/2019
Happy with my hitch :) The product was relatively easy to install, it took two of us about 1.5 hours to finish. I'm using it for my bike rack and it fits my 1.25" yakima "hold up" perfectly. I was worried that it would be too close to the car or too low to the ground, but I haven't had any problems.
by: John05/20/2022
Eases of install. took me a whole 45 mins. Definitely helps to have a second set of hands to hold the hitch in place. Highly recommend for a 2014 Impreza/crosstrek
John
5/21/2023
Still solid as expected. Still able to use my bike rack or my basket on my Impreza hasn’t failed sold bike rack
by: Mark 08/23/2023
2016 Subaru Impreza
Excellent installation kit and clear instructions. Online video very helpful companion to the installation sheet included in the package.
by: K07/27/2023
Great- easy to install Hitch allowing for my beloved bike rack!
by: Bryce09/19/2022
2010 Subaru Impreza
Works great and was very easy to install
by: Timothy08/21/2023
This hitch went on my daughter's car for her bike with no problems. I like the detailed information on your website and have made several purchases because of that.
by: Barry07/28/2017
2016 Subaru Impreza
Product DT24959 Really easy to install. Watching the video on their website is all the information you need to install trailer hitch. I was lucky to have access to a gas station lift and a second person to hold unit in place while I bolted unit on. We left off the spacer (item 6) maybe needed for different model of car also no need to lower muffler on 2016 Subaru Impreza.
by: Scott11/12/2017
The hitch installed easily and fit as expected. It took me about 90 minutes to install it myself. I did have to remove 2 of the plastic body fasteners under the bumper on the driver's side of the car to free up the plastic panel underneath. It was interfering with installing the hitch. I put the fasteners back in after the hitch was installed. The plastic panel rests against the hitch, but it isn't an issue.
by: Scott 07/14/2023
Easy install, works great for my bike rack and even a small trailer
by: Anthony04/24/2020
So happy with this hitch and this company!! Great prices, fast shipping and most importantly... excellent product. Great instructions. Great fitment. It took me about an hour because I did it solo with the help of the Jack. This hitch fits tucked under so nicely. I highly recommend this company and this product. Thank you!!
by: Andre07/17/2018
2017 Subaru Crosstrek
Very nice hitch. Easy to put on. Instructions were spot on. We use it with a bike rack.
25
155
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Why is Power Wire Run to Battery For Wiring Harness 118573 on 2016 Subaru ImprezaThe reason you need to run a power wire to the battery of your 2016 Subaru Impreza is to power the module of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118573. This allows it to draw power directly from the battery to bypass the electrical systems, so there is virtually no draw on your tail lights so they are protected from shorting out. I have added a link below to a help article which details the best way to route a power wire. Additionally, if you also need...
view full answer... - Trailer Hitch Recommendations for a 2017 Subaru ImprezaTrailer hitch # 76084 is designed for the Subaru Crosstrek and does not fit any years of the Impreza. All of the trailer hitches for the 2017 Subaru Impreza are Class I hitches with 1-1/4 inch receivers. If you have a 5-door wagon model with single exhaust you can use trailer hitch # DT24959. For the sedan you can use # 24960. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer...
view full answer... - Is There A Trailer Hitch Receiver Confirmed to Fit a 2018 Subaru Crosstrek Limited?We have not yet had the opportunity to test fit your 2018 Subaru Crosstrek Limited and our manufacturers have not tested it either, so I can't confirm a fit at this time If the information you read about the Crosstrek and Impreza is true, then the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # DT24959 would fit in the same way it fit the 2017 Crosstrek and Impreza. If you already have this hitch, I recommend using new hardware. You can use the Replacement...
view full answer... - Ground Clearance Comparison of Draw-Tite and Curt Trailer Hitch Receivers on 2018 Subaru ImprezaThe Curt Class I Trailer Hitch Receiver # C11465, the Draw-Tite Class I Sportframe Trailer Hitch Receiver # DT24959, and Draw-Tite Class II Trailer Hitch Receiver # 36644 are all within roughly a 1/4inch of ground clearance when installed on your 2018 Subaru Impreza. Due to that I recommend the Draw-Tite Class II Trailer Hitch Receiver # 36644 which is a stronger trailer hitch receiver capable of a maximum tongue weight of 350lbs, and a maximum trailer weight of 3500lbs. The Draw-Tite...
view full answer... - Recommendation for Carrying 2 Kayaks on a 2017 Subaru ImprezaWe do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
view full answer... - Is The Draw-Tite Trailer Hitch # DT24959 a Fit for a 2018 Subaru Crosstrek?I reached out to my contact at Draw-Tite and the Class I - 1-1/4" # DT24959 is a confirmed fit for models through 2017. The Class III -2 inch # 76084 is also a confirmed fit for models through 2017. They have not yet (as of Sept 2017) confirmed the fit for 2018 model years of the Subaru Crosstrek.
view full answer... - Are There Any Ground Clearance Issues When Draw-Tite # DT24959 is Installed on a 2017 Subaru ImprezaAlthough we haven't had a chance to test fit and shoot a video of the the Draw-Tite Sportframe Trailer Hitch Receiver # DT24959 on a 2017 Subaru Impreza, I was able to go to the warehouse and get some measurements for you. From the top of the frame brackets to the bottom of the coupler is about 9-1/2". If you check out the attached installation instructions you can use both to see about where the bottom of the coupler will sit on your Impreza. Hearing stories about ground clearance...
view full answer...
- Recommended Trailer Hitch, Wiring, And Ball Mount For 2009 Subaru ImprezzaFor your 2009 Subaru Impreza, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # DT24959 for a hatchback or theCurt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Item # C11317 for a sedan (excluding the WRX STiModel). Both hitches are rated for 2000 lbs towing and 200 lbs tongue weight max. For your ball mount, I recommend the Draw-Tite Drawbar for 1-1/4" Hitch # 3593. For a hitch ball I recommend # 19256 for a 1-7/8 inch ball or #...
view full answer... - Can The Draw-Tite Trailer Hitch 24959 Fit A 2024 Subaru CrosstrekThe Draw-Tite Sportframe Trailer Hitch Receiver # DT24959 you referenced would not be a compatible fit for a 2024 Subaru Crosstrek. You would instead need one like the etrailer Trailer Hitch Receiver # e98912.
view full answer... - Does Bolt Hole Spacing for etrailer.com Trailer Hitch Fit 2015 Subaru Impreza WagonThe etrailer.com trailer hitch receiver, part # E98838, has mounting holes that are 33-5/8 inches across and 7-1/16 inches front to back. It's designed to fit the Subaru XV Crosstrek from 2013 to 2015 and then the Crosstrek that followed in 2016 and 2017. It isn't a fit for the Impreza although the mounting hole dimensions are pretty close to the same. It's a custom designed hitch that isn't a fit or to be used on any vehicle other than what it's designed for. The only 2 inch trailer...
view full answer... - Hitch and Bike Rack for E-Bike on 2015 Subaru Impreza Hatchback With Single ExhaustYour 2015 Subaru Impreza hatchback with a single exhaust does have a 2 inch hitch available, the EcoHitch Invisi Trailer Hitch Receiver # 306-X7211. This is a pricier option, so if you are looking for a budget-friendly rack and hitch combo, you will want to stick with the best 1-1/4 inch hitch, which for your Impreza is the Draw-Tite Trailer Hitch Receiver # DT24959. This hitch has better ground and bumper clearances than the Curt Hitch # C11286 that also fits your '15 Impreza so you will...
view full answer... - Will EcoHitch Stealth Trailer Hitch Receiver 306-X7261 Fit 2011 Subaru Impreza W/ Single Exhaust?I may have another option for you, but the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" # 306-X7261 you were looking at will only fit the 2008-2011 Subaru Impreza 5-door Wagon with the Quad Exhaust and will not work on your Impreza as your vehicle only has the single exhaust. The only trailer hitch receivers available for the single exhaust models will be visible and do not have a removeable receiver like the # 306-X7261. Of the available options I recommend the Draw-Tite...
view full answer...
- Trailer Hitch & Related Items for 2017 Subaru Impreza 5-Door WagonOne of our main hitch suppliers,Draw-Tite, has confirmed a hitch fit for the 2017 Subaru Impreza 5-door wagon, EXCLUDING the WRX STi version that has quad exhausts. Except for that one version you can use their 1-1/4-inch Class I hitch # DT24959, installation of which is shown in the linked video. The recommended ball mount is # 3593 and with it you could use either 1-7/8-inch ball # 19256 or 2-inch ball # 19258. For a wiring harness you can use # 118573; a helpful article is linked to...
view full answer... - Will EcoHitch Trailer Hitch Receiver Fit a 2008 Subaru Impreza Hatchback with Single ExhaustThe only trailer hitch options for a 2008 Subaru Impreza Hatchback with single exhaust is the Draw-Tite Sportframe Trailer Hitch Receiver part # DT24959 and Curt Trailer Hitch Receiver part # C11315. I checked with EcoHitch and the EcoHitch Stealth Trailer Hitch Receiver part # 306-X7261 will not fit models with the single exhaust.
view full answer... - Installing Hitch Meant for 2004 Subaru Forester on 2014 Subaru ImprezaThe Curt # C12038 is a fit for the 1998-2008 Subaru Forester only, and wouldn't fit your new 2014 Impreza. For the 2014 Impreza, I'd recommend the Draw-Tite # DT24959, assuming your Impreza is a single exhaust hatchback model. For a four door sedan model, that's NOT a WRX or a WRX STi model, go with the Draw-Tite Class I, part # 24960. For a WRX or a WRX STi model, use the Curt part # C113178.
view full answer... - Is Kuat NV 2.0 Bike Rack Compatible W/ Draw-Tite Trailer Hitch DT24959 On 2017 Subaru Crosstrek?The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # DT24959 you were looking at for your 2017 Subaru Crosstrek will work perfectly with the Kuat NV 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Gunmetal Gray # NV12G you mentioned for carrying your bikes. I included videos for both of the products mentioned for you to take a look at.
view full answer... - Do Access Holes on 2014 Subaru Impreza Hatchback Frame Need to be Enlarged for All Trailer HitchesOn any of the trailer hitches for the 2014 Subaru Impreza hatchback with single exhaust you may need to enlarge access holes in order to install the hitches. Draw-Tite trailer hitch # DT24959 is the same way. Enlarging an access holes is fairly easy using a file, drill, or rotary tool of some kind. The holes normally do not have to be enlarged very much at all if they even need it. If you plan on doing some towing then I also recommend ball mount # 3593. It includes a pin and clip. For...
view full answer... - Recommended Hitch for 2013 Impreza Sport for Carrying Bike RackAccording to my research, the Impreza Sport is the hatchback model. The correct hitch for your vehicle will depend on whether it has single or quad-tip exhausts. For the single exhaust, I would recommend the Draw-Tite Class I receiver, part # DT24959. If you have the WRX or WRX STi model, you will need to use the Curt Class I, part # C11120. The Draw-Tite model will install without the need to drill any holes in the vehicle frame, but the holes in the frame rail will need to be enlarged...
view full answer... - Why Won't Cargo Carrier Shank Fit Into Class I Trailer Hitch On 2019 Subaru ImprezaIt sounds like you have a Class I Trailer Hitch like the Draw-Tite # DT24959 installed on your 2017 Subaru Impreza. Certain Class I trailer hitches like this one feature a tab inside the receiver that prevents higher class accessories from fitting properly. This was done by the manufacturer to prevent the trailer hitch and vehicle from being overloaded with higher class/heavier carriers or bike racks. Your existing Cargo Carrier is most likely a Class II or higher accessory, which is why...
view full answer...
- Availability of Replacement Hardware for Draw Tite Trailer Hitch 24959We do sell replacement hardware for all of the hitches we carry including the # DT24959 you referenced with the part # RHK. You'd just need to select the hitch manufacturer from the drop down menu and also enter the part number of your hitch and we'd get you the correct hardware.
view full answer... - Replacement Hardware Kit for Draw-Tite Class I Hitch # DT24959No problem, I can certainly help you there. On the top right hand corner of our home page, you will see a search box. Simply type in RHK (for "Replacement Hardware Kit") into the search box. Once you are on the RHK product page, simply type in the hitch part number in the provided field and select the hitch manufacturer from the drop down menu. We well set you up with the complete hardware kit for the hitch, which will be compatible with your Impreza Wagon as long as it has the single exhaust. I...
view full answer...
- 2017 Subaru Impreza Wagon Trailer Wiring RecommendationSince not everyone that installs a trailer hitch needs wiring we offer the wiring separate from the hitches like the Draw Tite part # DT24959 that you referenced. For trailer wiring you'd then want the part # 118744 which is also a confirmed fit for your 2017 Subaru Impreza wagon. For a ball mount you'd then want the part # 3593, and for hitch balls part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball.
view full answer... - Does Draw-Tite Use Knock-Out in Bumper to Pass Through Rear Fascia of 2013 Subaru ImprezaFor your 2013 Impreza Hatchback I'd recommend Draw-Tite # DT24959, if your vehicle has a single exhaust. If it is a WRX or WRX STi model with the quad tip exhaust, you'd want to use the Curt Class I, part # C11120. For the Curt model, there would be some fascia trimming required. The knockout you mentioned is intended to allow the factory installed hitch pass through the bumper fascia, and would not be used by an aftermarket hitch. To complete your towing system, you might also need...
view full answer... - Recommended Trailer Hitch and Bike Rack for a 2014 Subaru XV CrosstrekWe offer a number of trailer hitches and many bike racks for your 2014 Subaru XV Crosstreck. For a trailer hitch, I recommend the Draw-Tite Sportframe Class I Trailer Hitch Receiver # DT24959 for your vehicle. I recommend this htich because the Curt Hitches for your vehicle require stabilizing straps # 18050. This hitch is made form corrosion-resistant steel and has a black powder coat finish which covers an e-coat base for superior rust protection. This hitch easily bolts onto your vehicle...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark
8/11/2023
perfect still after one year