Derale 2-Pass Tube-Fin Power Steering Cooler - 12-5/8" Wide
(11 reviews)
Price: $38.15
In Stock
Derale 2-Pass Tube-Fin Power Steering Cooler - 12-5/8" Wide
Item # D13200
Retail:$47.45
Our Price: $38.15
You Save: 20%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Photos
Derale Power Steering Coolers - D13200
- Dual-Pass
- With 11/32 Hose Barb Inlets
- Cooler and Install Kit
- Derale
- 12-5/8W x 2-1/2T x 3/4D Inch
12-5/8" Wide x 2-1/2" tall x 3/4" deep, dual-pass, tube-fin heat exchanger improves the longevity and overall functioning of your vehicle's power steering system. High quality copper tubing with aluminum fins.
Features:
- Cuts back on heat-related pump failures
- Extends the life of both pump and seal
- Designed with copper tubing expanded into aluminum fins for maximum heat transfer
- Copper is the best material for conducting the heat out of the fluid while aluminum is ideal for transferring and dissipating that heat
- Provides protection during installation with extruded plastic fin guards
- Includes rubber hose with stainless steel clamps and all necessary mounting hardware
- Made in USA
Specs:
- Inlets: 11/32" hose barb
- Overall dimensions: 12-5/8" wide x 2-1/2" tall x 3/4" deep
- Core length: 10"
- Distance between inlets: 1-1/4"
- 1-Year warranty
Perhaps the simplest type of heat exchanger, the tube-fin effectively cools a variety of automotive systems. The concept is simple: Fluid cools as it travels through the core by transferring heat out to the fins. The fins then provide the surface area necessary for sufficient heat exchange to take place, allowing the heat pulled from the fluid to dissipate into the surrounding air. Quick, easy and effective.
13200 Derale Tube-Fin Power Steering Heat Exchanger
Hayden Automotive # 1009
Installation Details 
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Derale 2-Pass Tube-Fin Power Steering Cooler - 12-5/8" Wide - D13200
Average Customer Rating: 4.8 out of 5 stars (11 Customer Reviews)
12-5/8" Wide x 2-1/2" tall x 3/4" deep, dual-pass, tube-fin heat exchanger improves the longevity and overall functioning of your vehicle's power steering system. High quality copper tubing with aluminum fins.by: Georg H.05/23/2013
So far so good. Just installed the cooler a couple days ago getting ready for a move trailing a full load for 1000mi.
Install guide and descriptions are very generic and therefore require a bit forethought and pre-work.
Will see how the product will hold up in the long run.
Shipping and transactions with etrailer have been excellent once again.
by: Donell07/26/2021
So far so good. Installed on a 2011 Honda Odyssey. Primary challenge was using the exsisting hard line/ flex line points on the OEM system. Best bet is to remove the passenger headlight assy.
My install looked great, then the light wouldn't fit back in. On second try I used more line to allow the bulk to loop further into the van's body and not behind the light. Works like a champ.
If I were to do it again, I would likely use a tube cutting kit and plumb this inline with the factory hard line instead of trying to reach the OEM connection points.
by: Adam S.06/17/2016
Transmission Cooler was as advertised and the how-to video made for an easy install on our 2006 Honda Pilot. Highly recommend etrailer.com for all your towing needs!
by: Scott04/27/2018
Everything you need is in the box, good product quality (paint and material finish condition), easy to install.
With only two mounting points, this cooler rocked a bit and could potentially touch the radiator fins on my vehicle. I used some additional foam along the top and bottom edges to ensure it was securely mounted and to avoid hard contact with the radiator.
by: Dave 08/18/2012
Good easy install
Anonymous
6/4/2014
how do i install it
Rachael H.
6/10/2014
Before installing you will need to determine the best location on your vehicle to install this power steering cooler. The optimal location is between the vehicle grille and the AC condenser core. You will then need to identify the low pressure side of the power steering pump, and install the cooler in-line. After you have installed the power steering pump you will need to top of with additional fluid, and start the vehicle and rotate the steering wheel several times (while in park) to bleed the system and distribute the fluid, and add fluid as needed. The full installation instructions are linked on the right hand side of the product page for your reference. We have not had the opportunity to do an installation video of a power steering cooler.
by: John06/15/2018
It fit well, works as advertised and the price was competitive.
by: Ronald05/01/2020
received in a timely matter and was good quality
by: Jim F08/01/2014
Product arrived two days after ordering and was as described in online catalog.
by: Caleb01/19/2024
by: J. North Carolina12/03/2011
Great site and a great price. Arrived in a hurry. Would buy from them again!
by: harvey07/19/2012
just installed quality for the buck
11
11
See what our Experts say about this Derale Power Steering Coolers
- Transmission and Oil Cooler Recommendations for a 2011 Honda Accord CrosstourCongratulations on the new car. I will be happy to help you find some coolers that will fit your needs. For a transmission cooler, you can go with something small that will not take up a lot of space. I recommend the Derale Series 9000 Plate-Fin Transmission Cooler, # D13611, which measures 11 inches across, 3-7/8 inches tall, and 1-1/4 inches deep. This cooler is rated for up to 2,000 pounds so it would work well for your application. For an oil cooler, I recommend the Derale Stacked-Plate...
view full answer... - Transmission Cooler Recommendation for a 2005 Jeep Grand Cherokee with a 3.7L V6Most towing packages will come with transmission coolers, I would recommend you just get one of those for now as most vehicle engines and power steering systems do not overheat when towing within the towing capacity listed for the vehicle. For a transmission cooler I would recommend you get the largest cooler that will fit in front of the radiator. You will need to measure the area in front of your radiator to see what would fit. I attached a page that has all of the recommended coolers...
view full answer... - What Power Steering Cooler Is Recommended On A 2005 Honda OdysseyThe choice of power steering cooler for your 2005 Honda Odyssey will depend on the amount of room you will have to mount the heat exchanger on your vehicle. The power steering cooler will be installed inline with the power steering pump and the heat exchanger will need to be located in a position where it can get airflow to help cool the fluid. Since you are installing a transmission cooler also, you will want to make sure you will have room for both the transmission cooler heat exchanger...
view full answer... - Recommended Power Steering Cooler for 2004 Honda PilotPretty much the only time that a power steering cooler would be overkill is if you lived in a cold environment. If you live in a cold environment then you will just want to give your 2004 Honda Pilot a little time to heat up the fluid before driving around. The same can be said for a transmission cooler; you really can't "overcool" it. With that being the case, I say go with the Derale 4-Pass Tube-Fin Power Steering Cooler # D13212 over the Derale 2-Pass Tube-Fin Power Steering Cooler...
view full answer... - Transmission Cooler Recommendations for 2002 Honda OdysseyThe Derale # D13502 would be an excellent transmission cooler for your Odyssey. You'll want to check the area directly behind the grille, in front of the A/C condenser and radiator to ensure there's enough room to accommodate the 11 x 7-1/4 x 7/8 inch dimensions of the cooler. I'd recommend consulting your owner's manual, because for certain vehicles, Honda also recommends a power steering cooler, like part # D13200. I'll link you to some FAQ articles and an install video that you might...
view full answer... - Recommended Transmission and Power Steering Coolers for a 2019 Honda PilotThe best transmission cooler you can possibly add is the largest one you have space for. You really can't cool transmission fluid too much. For your 2019 Honda Pilot I recommend the Derale Series 8000, part # D13503. We installed it in a 2017 and it worked well. I've linked the video. For a power steering cooler the Derale 2-pass tube-fin cool, part # D13200, is a great choice. You could upgrade to a 4-pass, like part # D13212, but it's likely more than what you need.
view full answer... - Trailer Wiring Harness Recommendation for a 2005 Jeep Grand Cherokee 3.7L V6The first wiring harness that will need to be installed on your 2005 Jeep Grand Cherokee 3.7L V6 is the Tow Ready T-One Wiring Harness, # 118394. This wiring harness will tee into the Jeeps tail light wiring directly behind the tail light assemblies. I have attached the installation instructions as well as an installation video on a 2005 Jeep Grand Cherokee for you to check out. If the trailer has a 7-way blade style connector, then I would recommend using the Installation Kit, # ETBC7....
view full answer... - Power Steering Cooler Replacement For 2000 GMC Sonoma You could replace the stock steering cooler in your 2000 GMC Sonoma with a Derale cooler. However, I recommend to make sure you are replacing it with one similar size to the OEM. The Derale 2-Pass Tube-Fin Power Steering Cooler - 12-5/8" Wide part # D13200 will provide to most cooling because it is 12-5/8" wide x 2-1/2" tall x 3/4" deep. I have attached the installation instructions for your reference.
view full answer... - Trailer Hitch, Wiring, and Brake Controller for a 2007 Honda OdysseyYes, I will be happy to help add tow options to your 2007 Honda Odyssey. First you will need Draw-Tite Max-Frame Trailer Hitch Receiver # 75270. This hitch has a maximum tongue weight rating up to 675 lbs and gross trailer weight rating up to 4,500 lbs. If the towing capacity in your Odyssey owner's manual is lower that the capacity of this hitch, tow according to the weight limits in your manual. There is no drilling required for installation. Next, you will need 4-way Flat Trailer Connector...
view full answer...
- Transmission and Power Steering Cooler Recommendations for a 2004 Acura MDXA transmission cooler would be a great idea for you. Especially considering the mileage on your vehicle, the length of your trips with the trailer, and since your vehicle manufacturer recommends one. I attached an FAQ on transmission coolers for you to check out also. Basically, the cooler you keep the transmission fluid, the longer the life of your transmission will be. The same is true for your power steering pump. The Derale Dyna-Cool Tube-Fin Transmission Cooler # D12906 that you referenced...
view full answer... - Power Steering and Transmission Cooler Recommendations for a 2007 Honda PilotFirst, if the parts you are looking at elsewhere are OEM or otherwise branded as Honda parts, that is why they cost what they do. Aftermarket parts are almost always at a lower cost. And Derale products like cooler # D13502 are quality parts that I, and several others here, use in our own vehicles. So it is good and true rather than too good to be true! I have included a link to a video showing a typical installation for you and a link to our FAQ article on transmission coolers. You could...
view full answer... - Can Combination Cooler be Used to Cool Power Steering and Transmission Fluids on 2002 Honda OdysseyThe Derale combination cooler # D15321 can be used to cool any two fluids you want; oil and transmission, oil and power steering, or transmission and power steering. If you use it to cool the engine oil then you will also need a remote oil cooler install kit, # D15751. If you do not have a lot of room to place a large combination cooler you can get separate coolers for the transmission and power steering pump. The most popular option for a transmission cooler for your 2003 Honda Odyssey...
view full answer... - Recommended Transmission Fluid And Power Steering Cooler For 2010 Honda OdysseyWhen you want to install a transmission fluid cooler or power steering cooler, the most important thing to note is the location for best efficiency. The larger the cooler, the more efficient it will work. I have attached a drawing that shows the best place to mount a cooler on a vehicle. You want to measure to make sure you have room to mount any cooler you choose. The Derale Transmission Cooler, part # D13503, is a plate-fin cooler and measures 11 x 8-3/4 x 7/8 inches, and would do a...
view full answer...
- Trailer Wiring, Transmission and Engine Oil Cooler Recommendation for a 2011 Honda PilotLet's start with trailer wiring. For that you will want the Curt Wiring Harness part # C56365. This comes with every thing needed for trailer wiring for your vehicle and will install easily. For a combination oil and transmission fluid cooler you would want the Derale Combo Cooler part # D15902, this comes with everything needed to install on your 2011 Honda Pilot. And then for a power steering cooler you would want the part # D13200.
view full answer... - Trailer Hitch, Wiring, and towing Accessories for a 2011 Toyota VenzaWhat the dealer most likely meant is that the Toyota Venza does not come with a factory tow package and thus there are no official tow package parts made for it that are OEM. You can still install a trailer hitch and wiring in your 2011 Venza. The Draw-Tite Hitch, # 36512, that you referenced is a good choice. Even though the hitch has a gross trailer weight capacity of 3,500 pounds, you must still go by the owners manual for the towing capacity of the vehicle and go by it. If that is...
view full answer... - Power Steering Cooler for 2006 Mazda 6For your high-performance vehicle my contact at Derale recommended replacing the leaking power steering cooler with their part # D13200. He indicated that cooler # D13213 is a bit small for your application.
view full answer... - Transmission and Power Steering Cooler Options for a 2006 Honda Pilot Towing 1520 Pound TrailerIt is always recommended to follow the instructions of the manufacturer, in this case Honda, but adding a transmission cooler and power steering cooler is always a good idea. When towing, the added weight puts more stress and strain on the transmission and power steering components. Adding coolers will extend the life of these components by keeping them at their optimum operating temperature. For your 2006 Honda Pilot and the trailer and ATVs you plan to carry, I recommend going with a...
view full answer... - Can a Supplemental Power Steering Cooler Be Installed on a 2008 Honda Odyssey with Factory CoolerWhen installing a power steering cooler like # D13200 on a vehicle that has a factory power steering cooler, the best thing to do is install the supplemental cooler in line with the factory cooler. What you will do is find the return line from the factory cooler that leads back to the power steering pump. The factory return line will run to supplemental cooler # D13200 and then from there back to the pump. I have included a picture showing the direction of flow for you.
view full answer...
- Power Steering Cooler Recommendation for a 2006 Chevy ImpalaYes, a power steering cooler like the Derale Cooler part # D13200 would be a great choice for your 2006 Chevy Impala if your current fluid is getting too hot and affecting how the power steering is performing. Coolers like this cut back on heat related pump failures and will extend the life of the pump.
view full answer... - Recommended Transmission and Power Steering Cooler for 2006 Honda PilotThe various coolers aren't vehicle specific. The most efficient spot to mount a cooler is directly behind the vehicle grille, in front of the radiator and the A/C condenser. Unless you continually run your vehicle in a very cold environment, you'll need to measure the amount of available space you have in this area, and choose the largest cooler that will fit. The # D13502, which measures 11 x 7-1/4 x 7/8 inch thick should work very well for you, assuming you have the available room....
view full answer... - Are Transmission Engine Oil and Power Steering Coolers Needed For Towing with a 2007 Honda PilotSince the manufacturer recommends these aftermarket additions for your Pilot, we cannot suggest differently. The thing to remember is that if you do add these items and a warranty issue comes up, you have shown that you took the proper steps to ensure that your vehicle would perform properly so warranty service should not be a question. Another thing to consider is that heat is the enemy of your engine, transmission, and power steering. Using a cooler will dissipate more heat and prolong...
view full answer...
- Power Steering Recommendations for a 2006 Chevy Impala with a 3.9 liter EngineThe choice of power steering cooler for your 2006 Chevy Impala will depend on the amount of room you will have to mount the heat exchanger on your vehicle. The power steering cooler will be installed inline with the power steering pump and the heat exchanger will need to be located in a position where it can get airflow to help cool the fluid. For your vehicle, I would recommend either the Derale 2-Pass Power Steering Cooler, # D13200, that you referenced which allows the fluid to pass...
view full answer... - Recommended Power Steering Fluid Cooler And Transmission Cooler For 2008 Honda OdysseyAdding coolers like a power steering fluid cooler and a transmission fluid cooler will help prolong the life of those components. You will want to consider the location for the cooler you install. I have attached a drawing that shows the best locations for mounting the transmission cooler. For your 2008 Honda Odyssey the transmission cooler you referenced, part # D13502 would work well. This is a Class lll cooler and comes with the mounting kit, OEM spec hose along with stainless steel...
view full answer...
- Derale Combination Transmission and Engine Oil Cooler Installation on a 2007 Chevrolet SuburbanThe Combination Engine Oil and Transmission Cooler you purchased, # D15902, will work great on your 2007 Suburban, provided that there is 2 inches of clearance below the OEM oil filter for installation of the sandwich adapter and installation and removal of the filter and there is room for the oil cooler hose to be routed when the sandwich adapter is installed. Lets break the installation down to engine oil cooler and transmission oil cooler separately since the combo you purchased is...
view full answer...
Do you have a question about this Power Steering Cooler?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
DeAnne T
Updated by:
Daron K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Georg H.
6/3/2014
The product has been working fine and just as expected. Have not had any issues since the big haul last year.Definitely recommend this product for anyone in need of.