Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Throw this storage cover over your R-Pod trailer to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.
Features:
Specs:
You're worried about your R-pod trailer getting wet and dirty in storage before your next camping trip. Whether you're storing your trailer in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your trailer will be protected. When you keep your trailer covered, you are less likely to need to wash and wax it in between trips. And if you want to trade your trailer in for a newer model later down the road, this cover will help maintain that resale value.
The 3-ply PolyPro top panel has moisture-wicking technology that vents condensation away to reduce moisture buildup that can damage your trailer over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your trailer. And when the rain stops, the fabric dries quickly in mild sunlight to minimize the development of mold and mildew.
How to Measure Your R-Pod Trailer
To determine if this cover will work for you, measure the overall length of your trailer from the very front of the trailer to the rear bumper. The cover isn't meant to fit over the trailer tongue or any propane tanks or battery boxes you might have in the front, so don't include those in your measurements. Then measure the overall height from the bottom of the chassis to the top of your trailer. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.
Securing the Cover to Your Trailer
First unroll the cover and carefully spread it evenly around your trailer, making sure you don't pull too hard and tear the fabric. When you're putting the cover on your RV, the brand logo should be positioned at the front of your rig.
Once the cover is in place, wrap the elasticized hem on the cover around the bottom corners of your trailer to remove any excess slack in the material. Adjust the tension panels on the front and rear of the cover with the cinch straps until the cover fits snugly around the contours of your trailer. Then toss the weighted straps underneath your trailer to the other side and buckle them together, which keeps the cover secure and prevents it from flapping in the wind and damaging the paint job. The tension panels will help reduce the stress on the cover while you're tightening the straps.
And if you still need to winterize, you can use the zippered panel on the passenger's side to easily access the interior of your trailer without having to completely remove the cover. You can also unzip the panel on the back of the trailer so you can reach into the rear hatch.
Average Customer Rating: 4.3 out of 5 stars (345 Customer Reviews)
Throw this storage cover over your R-Pod trailer to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.I have a 2017 Mini Winnie Drop 1790. Wanted a cover for the winter months to keep it looking great. Stumbled upon etrailers website but couldn't find a cover exactly for my trailer. Used the ask a question link and got a very prompt response. That was awesome. The email said this cover was for a R Pod but should work. It fits well except the left side where the plug in is located. I keep it plugged in at home to run the fridge. We had a pretty decent wind storm the other night and the cover didn't budge. Was about a 10 minute install with me and my wife with a couple step ladders. The zippered door opening match up nice for the door and rear hatch. Overall, great customer service and what looks to be a great product!
We just pulled this cover off of our Heartland MPG 183, after the heaviest winter in recent Alaskan history. The trailer and the cover were both in excellent condition. I would highly recommend this cover.
Fits my 2019 Tab 400 perfectly.
Cover fit my Bushwhacker Plus perfectly. Appeared to withstand last winter's deep snowfall well. So far, very happy with it and certainly more cost effective than the $500 winter storage fee my dealer would have charged!
Works as intended
Well worth the money. The Cover is withstanding winter conditions in the Northeast and providing great coverage.
Great condition and holds up well in weather. Dries out well. Fits Liberty’s Little Guy Max 20’ teardrop which was huge because the one specifically made for it is double the cost. It’s a little tight in some places like around the propane area and in the rear corners but it’s got stretchy corners and zippers so once it’s on it’s good to go. The door opening doesn’t exactly fit to the little guy max, but it’s close enough to easily get in and out. Finding something that was not 100% custom that worked was a huge cost saver!
It has been a pretty good cover. I did get one small tear in it, but not sure if it snagged something on the roof during removal or what. Otherwise nice fit and yes I would buy it again. The wheel covers I would give a 5 star. They fit nice and don't come off in the wind.
It lasted 3 months. It disentigrated from the sun. The white fabric turned to powder. Classic Accessories upgraded me at a cost and the instead of the full warranty said they would honor the upgrade warranty for only one year.
Fits my tab 400 pretty good little big but great quality
I have not gotten my cover yet
This cover fell apart like a saltine cracker soaked in water. I explained that to etrailer customer service but sent me another one anyway. I'm guessing there was a problem with the composition/formulation of the fabric. Five stars, as always, for etrailer's follow-up and customer service.
Bought this for use on a Winnebago Winnie Drop 170k. Fits perfect! The flap for the door is perfectly aligned.
Really happy with the quality and it looks awesome on the trailer. Thanks etrailer!
Works fine on a t@b 400. Well made
Donald
8/12/2023
Great! Excellent workmanship.
We love it. Great product. Going on our 2nd winter
Very fast delivery. Have not used yet.
Great experience dealing with etrailer on getting a High quality cover that fits perfect over my tada travel trailer
This cover seems well constructed and fairly easy to put on the trailer. However, it wasn't folded to apply the way the instructions stated. As well, the instructions say to get on top of the trailer, which we aren't able to do. My suggestion is to change the instructions. It took two of us -- we spread out the cover, then on each side walked the cover back and over. Doing it that way wasn't too hard. Suggest putting pool noodle sections on the trailer parts that are pointy and stick out. Glad we got it!
Seems well made and as advertised. Went on easily with good elastic at the corners. Nice length on the sides. I ordered the 20 foot for a Trailmanor 2619 and have plenty of length at the front and rear.
So far so good . I was afraid that this would not fit my popup. I have a Rockwood Highwall the big one. and it fit just fine with little extra room. Just what I needed. Thank you very much.
Do you have a question about this RV Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
12/8/2022
This item shows that it has arrived on 1020, please check with your neighbors and outside of your home to confirm whether or not this has arrived.