To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Ford Escape with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
Average Customer Rating: 4.8 out of 5 stars (58 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Great kit. I wish I had watched the video first but I was outdoors and charged ahead with the printed instructions which had me removing a taillight before I realized that was not necessary to gain access to the plug.
Everything that I needed was in the kit undamaged. I used the installation video and everything went according to the video. I am quite pleased and will purchase from etrailer in the future.
Everything was perfect. All items shipped and arrived when stated. The video for installation was perfect.
Thank you.
Open box and found order in tact, without unwrapping nuts & bolts. Had one of these receivers on a previous car and had no problems.
Very easy installation!
The wiring package went well thanks to your video. Everythiung was spot on.
Very fast service. I received my order very quick.
As advertised for 2020 Ford Escape Hybrid. Order was shipped immediately with updated tracking. Video helpful during installation. Having the battery in the same area made for an easy install. Have purchased through E-trailer several times and customer service has always been great. Would not hesitate to use again.
Came with everything that was needed for installation except for the criping pliers. If I can do it you can do it.
It’s a little tricky to get installed but if you take your time it works great. No issues at all with the product.
Great customer service and knowledge about the parts. Thank you so much
Works fine but package didn't contain a fuse, adhesive tape for module ,a ground screw, or wire ties per description (photo)
This wiring is for add-on trailer hitch and allows connecting tail-lights wiring from RV without cutting original vehicle wiring when being towed.
was super easy to install works perfect.
The installation video was super helpful! - Watch the video, then go under the vehicle and take a look since things are always 100% the same (my heat shield was slightly different), then watch the video again. You'll need to purchase a die grinder drill bit on [online] for $10 if you don't already have one. Wear eye protection! Everything went super smoothly!
“Real” customer service. Great product, fast shipping, outstanding communication.
Great price and Fast shipping. The step by step videos are excellent and spot one. Customer for life. Can’t say enough good things about e trailer.
Very convenient transaction. Thanks!
Super easy with the Hybrid model, since the battery is under the spare tire and you don't need to remove the tail lights, all the connections needed are behind the rear side panels.
Delivery quickly and worked perfectly.
Job well done , no complaints .
Watched the you tube video and installed it the same way. The instructions that came with it were a little off but overall very good
Products are excellent quality and service provided by your shipping group is timely and helpful!
Had no problems at all with this
Easy to install
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Garry
11/29/2022
Working great.