Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs

I installed the Curt gooseneck on my 1993 GMC 2 Wheel Dr. 2500 truck. All the components have tight tolerances. It took me eight hours. With a socket and the wrench. Laying on my back. I did have to cut the wheel well lip about 3/8 of an inch off because I could not get that front angle bar to slide in without hitting it, no way around it unless you lift the bed up and I wasn’t going to do that!!. You have to cut it.instructions do not state that. I’m very happy with the Hitch, it is definitely stout! I did have to make a notch on the outside brackets to go over my airbag bolt. I also had to remove the support bracket on the inside of the frame for the airbag and the crossmember for the spare tire to get the front angled bar in.1293750

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Mark 04/29/2024

Perfect fit easy enough to install and easy to use really like this product1776060

by: Jonathan 08/22/2023

1995 Chevrolet C/K Series Pickup

Used this kit to modify and fit my c notched lowered truck. Side plates welded to notch and hitch assembly is still removable. Kit was as described and am pulling 19k wit it and zero problems1652215

by: Raymond 12/08/2021

This is an excellent product. I installed the hitch myself and it was pretty straightforward. I did a lot of research on installing a below bed hitch to make sure it went well. I did have a small issue with getting one of the bars in. I put a call in and got great customer service. After a year of use I have had no issues at all. I will definitely use etrailer in the future.1220114

Raymond

12/9/2022

It has been two years of use with this hitch and it still works perfectly. I have had no issues at all.

Great product fit my truck perfectly 1708440

Everything looked to be packaged nicely i haven’t started the install though so time will tell.1699029

Perfect fit, sturdy, and instructions were almost perfect. Install time approx. 5 hr. without lift. Loosen and lift truck bed would have saved about 1 hr. Overall simple to install, all bolting points and hole were perfect .
Excellent Customer Service.
Special thanks to all who helped on ordering and shipping.425338

Hal

8/26/2018

Used this 4 or 5 times and works great. Checked all bolting points and still tight and secure. So far so good, working great.

by: Will J10/09/2019

1996 Chevrolet C/K Series Pickup

I purchased this gooseneck hitch about a year ago to go on my pickup. I didn't install it right away as I didn't have a trailer that needed a gooseneck hitch. I installed the hitch in April of 19 when I found a trailer that I wanted and needed to transport it. Everything installed smoothly and in about 4 hours. I was taking my time and triple measuring to make sure I didn't cut or drill holes in the wrong location. All of the bolt holes line up on the frame and the only drilling that I had to do wad through the floor of the bed for the hitch to come through and the u-bolts for the safety chains. Make sure that you read the instructions completely and carefully and the installation is a breeze. I am happy with this hitch and would buy another one for any new truck that I get.715171

Direct bolt up for 1997 Chevrolet C 2500 took me approximately an hour and a half to install and never removed the bed1092900

Thomas

7/14/2022

Great

Will be returning. Crossbar pieces didn’t line up with bolt holes on brackets bolted to the frame. Angle iron crossbar didn’t even fit inberween the bed and frame. Also the bolts to go in the rear cross bar didn’t even thread in either the threads on the cross bar were the wrong size or the bots were the wrong size. 619508

Very fast shipping I’ve not got to install yet1180735

Charles

10/16/2022

The curt turnover ball works great

by: Clint M03/09/2020

After a year of owning still looks great and performs great, install instructions were spot on and haven’t had any issues with hitch,use it almost every weekend. 764558

Works great and easy to install 1437508

by: Dave M01/07/2020

Chevrolet

Installed in a ‘95 Chevy K3500. Fit perfectly, easy install. Works like it should -no issues. Can highly recommend.736228

by: Kylee10/17/2020

Hauls my trailer AMAZING!!!!! 900372

by: Ryan 04/17/2021

Great fit was very easy to install 1014121

1703835

by: Nathan 12/24/2021

1230678

by: Ron04/08/2023

2014 F150
Wow, what can I say, this is an extremely solid, well built unit.
I knew it was about 90 pound, but when you take it out of the boxes the quality really hits you. Everything fits just as it is supposed to. The bolts are all Grade 8, and when you get everything torqued you know this unit is truly part of the truck frame.
Maybe a little over kill for our 5500# Escape 5.0 TA, but I wanted that confidence while connected, and I got it.
Coupled this with the Anderson Ultimate Hitch in Black Out and couldn't be happier.1552669

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Richard 04/01/2023

Easy installation. We had 3 guys and were done in 20 minutes less than instructions said. Works fine as frog's hair! When measuring the hole in the bed remember to measure from the front of the bed and rear! Then look underneath for the bed crossmember.1547979

by: K.L.06/28/2023

Great product but the instructions are a little muddied. I replaced a welded in under bed gooseneck hitch with this unit. I chose this unit over a single pin gooseneck flip ball for the added mental security as well as potential for less rattle1610572

Click to Enlarge

by: Tiffany05/03/2024

I had already had to return 2 hitches to another company because they sent the wrong ones. I ordered from etrailer.com and got the right hitch the first time and it has been amazing! The directions wanted the hole drilled in the wrong spot in my bed so before you start drilling make sure you measure and check and double check EVERYTHING. But that was literally the only thing that wasn't perfect. I haul valuable lives with my truck and this hitch has been great!1778466

by: David 04/12/2024

I really like the hitch as it was easy to install and being a turnover ball it leaves my bed free when I need to haul something. Very sturdy product and I would recommend it to anyone looking for this style of gooseneck hitch.1766240

by: Mike 12/20/2022

Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it.

The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together.

Once the threads were clean, everything assembled very well.

The hitch takes time to install, at least if you want it to look good and be correct.

On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.1487694

by: Robert 02/06/2023

Got this for our new camper last year. Did the installation myself with a few buddies very straight forward directions. We use a Reese goose box with the curt 4” off set ball on our 08 short bed truck! Would definitely recommend1513429