Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily install a 4-way trailer connector on your vehicle with this custom harness. Harness splices into existing wiring.
Features:
Specs:
Installation
This custom-designed wiring harness splices into your vehicle's wiring harness, which is located either along the driver's-side frame rail or behind the rear bumper.
It is recommended that you use a small amount of grease on all electrical connections, such as this 4-pole connector, to help prevent corrosion.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (63 Customer Reviews)
Easily install a 4-way trailer connector on your vehicle with this custom harness. Harness splices into existing wiring.Excellant value
To be fair it's difficult to review this. I haven't installed it. The instructions, in my view aren't much help. Way too general. I've watched several video on how to wire this sort of thing in but again, nothing specific to my vehicle so I've been a little intimidated to get in there and start splicing. The product itself may be fine but until I install it I won't know for certain. I just need to get my confidence up a bit more before making the attempt.
Attached as instructed. Video on site very similar to reality. Found existing wiring bundle behind rear bumper on driver's side. Product attached directly to that bundle and worked correctly.
William N.
7/6/2016
No issues. All is great.
Everything you need to add a standard 4 wire trailer connector to most any vehicle. Inline tap connectors are provided if you already have a factory bumper mounted connector, or simply splice it to the end of the taped off harness. The included dust cover and plastic sheath is a must for any trailer connector as dirt and corrosion is the number one cause of faulty trailer lights. The price may seem a little high, but you will spend alot more acquiring the supplied parts in the kit.
All items ordered were delivered well packed to prevent damage and arrived within specified time. I will be ordering weight distribution and anti-sway system in the near future.
Wiring harness was good. Being it was a conversion van, main harness was not in normal location. The towing mirrors work fine except for a little vibration. Thought right side would have been wide angle, but will add stick-on for more coverage. The hidden hitch was very easy since the van is extended body...less than an hour to install.
Very pleased with ETrailer service and follow-up. They packaged and shipped the trailer wiring harness I ordered pronto, and sent it off via UPS Mail. I should mention, however, that the postal service side of the delivery was not good: Most of the time the post office is OK, but this time they "round-robined" the package to several post office locations -- and then it was delayed for 5 days at the last post office location:
1. I finally had to call ETrailer regarding the interminable delay; and their customer support did look into it, and the parcel finally arrived soon after.
In all, I'll be very happy to order from ETrailer again. I think they're a solid, reputable outfit. With the next order I'll probably pay extra to have the item shipped thru an expedited UPS delivery (rather than rely on the post office).
Nice quick and easy replacement for the old corroded connector on Blaze the wonder car.
Tom K.
7/13/2019
Still running strong
The brake controller that I purchase is working very well. I am enjoying features of the product that I did not know existed before I purchased it, like variable braking on the trailer as one applies the brake on the primary vehicle. And, all of this can be adjusted. Great product that has made my hauling safer.
Pretty simple part, just 8 crimps and route it. I think I had to supply my own butt splice connectors, this doesn't come with them, but not 100% sure on that. The rubber cap was also missing from mine but I called etrailer and they sent one right out.
Blazer had the towing package harness right where the instructions said to look - wires itnright up. Works like a charm!
Harness went on just fine. It's of good quality and I like the added features of the weather cap for the plug. Wires are plenty long and it's got that wire protector. Went to the parts store and got some wire connector crimps and put it on with no issues whatsoever.
If I were to change anything about this product it would merely be to include the wire connecting crimps or make them available on the same web page as a suggested item.
I give three stars because the wire length is too short for use on the Astro van. You’ll need to extend the length by an irritating foot. You’ll also need to extend the right side blinker wire by 4 feet to reach the harness near the ceiling which contains the right side blinker wire. The quality is good, but I would have paid more for longer leads. I would make all the conductors 4 feet longer and up the price.
It's always great to get a vehicle specific wiring kits create a neat and back-feed proof connection for trailer lights.
I have not installed this wire harness yet. However the product arrived quick with no problems and I have received numerous responses from the company etrailer.com in regards to my purchase. So far great customer service.
fantastic fit...fantastic service...fantastic price... fantastic internet purchase right to the door free... did I mention free... fantastic...fantastic...fantastic...unless you went to the junk yard you would be crazy to buy any where else....
Installation instructions didn't help a novice. [on-line video provided] wasn't any better. Had to take it to a shop. Perhaps an updated instructions is in order.
The product was just as advertised. I have installed these before so there was no surprises.
Thanks etrailer for provided such products at a reasonable price.
This product is excellent, exactly as described, and performs well. I would recommend purchasing from etrailer.
Order arrived on time. Was exactly as discribed with detailed installation instructions. Quality looks very good.Havent installed yet . Thankyou
After my local AutoZone failed twice to get me what I needed at 50 dollars more, I called etrailer and had it in just a few days (faster service than what they promised). Fit was perfect and all is good. Great product info. Thanks guys
Works fine, but needed to drill access whole in bumper frame below tail light to route wire. Not a job for a novice.
EXCELLENT PRODUCT, WATCHED U-TUBE , INSTALLED IT IN MINUTES, ABSOLUTELY NO PROBLEMS.
Wiring harness arrived several days ahead of schedule. Happy with product.
everything I bought is exellent quality and got to me in a timely manner,couldnt ask for anytjing more,Thanks etrailer,Paul
The harness comes with a adequate length for making connections.
The connections could be of the compression type, rather than the type used.
This would make the splice area smaller, and easier to cover over.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
9/3/2021
I know that you are hesitant about the install of your wiring. This is a factory replacement so the wires you need should be along the drivers-side frame rail or behind the rear bumper. I would use a circuit tester to test for functions because sometimes the wires are different colors than what comes in this kit. Usually, the bigger white wire is the ground. The quick splice connectors are quite handy and relatively easy to use.