Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
(198 reviews)
Price: $322.27
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
Item # C15323
Retail:$540.95
Our Price: $322.27
You Save: $218.68
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (198)
- Q & A (0)
- Photos
CURT Trailer Hitch - C15323
- Class V
- 2 Inch Hitch
- 16000 lbs GTW
- Visible Cross Tube
- CURT
- 2400 lbs TW
- 17000 lbs WD GTW
- 2400 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum GTW when used with weight distribution: 17,000 lbs
- Maximum tongue weight: 2,400 lbs
- Maximum TW when used with weight distribution: 2,400 lbs
- Maximum gross trailer weight: 16,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15323 CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty- 2"
Installation Details
This Product Fits The Following Vehicles
- 1999 - 2013 GMC Sierra 1500
- 1999 - 2004 GMC Sierra 2500 LD
- 2014 - 2014 GMC Sierra 1500
- 2007 - 2007 GMC Sierra Classic 1500
- 2007 - 2007 GMC Sierra New Body 1500
- 1999 - 2013 Chevrolet Silverado 1500
- 1999 - 2004 Chevrolet Silverado 2500 LD
- 2014 - 2014 Chevrolet Silverado 1500
- 2007 - 2007 Chevrolet Silverado Classic 1500
- 2007 - 2007 Chevrolet Silverado New Body 1500
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" - C15323
Average Customer Rating: 4.8 out of 5 stars (197 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Alan11/28/2022
2007 Chevrolet Silverado 1500
Hitch is very heavy duty but seemed to have been delivered by Ace Ventura. Was very scratched up. Hitch bolted right up on a 2007 GMC 1500 HD. The height of the hitch exactly matched the original. Spare tire does not need to be removed. Per the instructions, you are supposed to re-use the existing aft most frame bolts. Be aware that if you use those, they only engage the weld nut by 3/16 of an inch. That is short of fully maximizing the weld nut. Ideally, the bolt threads should go all the way thru the weld nut plus about 2 threads. I replaced those aft bolts with longer ones that fully engage the weld nut. Since the new hitch does not attach to the bumper, I fabbed a custom Z bracket, using 2 pieces of angle iron, to help carry the load. The light plug assy needed to also be modified. The factory angle is 90 degrees, but the wire harness would bot engage the plug assy. I modified the plug bracket as can be seen in the photos.
by: Jason 04/13/2024
Chevrolet
I bought this for my 02 Chevy 1500HD. It bolted on perfectly and is ideal for pulling heavier loads. I’ve pulled max payload loads for the truck with this new hitch and it has worked with no trouble. Would suggest to anyone.
by: Jason10/10/2022
Website said it would fit perfectly for my 2004 Chevy 2500HD. It did not. I had no option to return as I needed to tow the following day so had to work into the night to customize it which therefore I wouldn’t be able to return. I had to use a torch to cut a section out of both sides on the hitch to have it fit around the spring shackle and had to use the torch to make a new bolt hole in the frame closest to the front for that bolt hole. Also drops the receiver an inch lower than the factory height. Was not at all happy but was thankful I had the tools to make it work. Worst thing I hate is that it’s dropped lower than the stock receiver height.
Katrina B.
10/18/2022
I am sorry to hear that this hitch did not fit your application. I see that this hitch is not a confirmed fit for any of the Chevy HDs. This is only a confirmed fit for the Chevy 2500LD and 1500.
by: Dan 02/03/2024
The trailer hitch is great simple installation but I had to change hooks on my chain from my trailer other than that top notch
by: Seabee John07/01/2023
2011 Chevrolet Silverado
Went on my 2011 Silverado LT without removing spare tire.
by: Denise11/29/2023
It's well made and installation was pretty simple. Nice early x-mas present!
by: Tammy 03/06/2024
this is a way better hitch than class 3 hitch I relaced after 23 years.
by: Kim12/14/2023
2014 Chevrolet Silverado 1500
Clear simple instructions, went on quick and easy. Looks good and feels sturdy.
by: Sidney 04/17/2024
2011 GMC Sierra
Fit perfectly on my 2011 GMC 1500 Sierra SLE Fast shipping great customer service I have never had any problem with any thing I have ordered from ETrailer Great company to do business with Thanks
by: Dale T03/17/2024
Very well made and very fast shipping!!! I would definitely recommend also use etrailer again !!!
by: Kurt04/26/2024
Mack Trucks
I brought this to my local garage to install it, and they were amazed at the quality. They wondered if I was going to start to haul Mack trucks around or what? It has had zero defects all the holes lined up perfectly to my truck.
by: 02/01/2024
Only problem with this kit is the attaching screws. They were usless. I ended up thru bolting with bolts and nuts.
by: StJulian09/17/2017
2013 Chevrolet Silverado
Shipment was quick.After getting the a socket deep enough to remove the old bolts from the light duty hitch on my 2013 Silverado, The installation was straight forward and simple with the help of my wife and son. Thanks etrailer.
Stjulian
9/18/2018
Awesome. Still hold strong after 1 year. Handles heavy loads without issues. Still please with this purchase and the easy of installation.
by: Gary K04/14/2020
2012 GMC Sierra
Great price, quick shipping even with the pandemic going on. Had a little trouble installing this heavy duty hitch by myself but went on very easy with no issues.
I have not pulled anything yet, but don't expect any issues with this 16k rating on a 1/2 ton truck.
Gary M.
4/15/2021
No issues at all. Great product and company to purchase from.
by: Eric04/24/2020
2011 GMC Sierra
This is an excellent upgrade to the OEM hitch. Installation was easy and the spare tire can remain in it's original location.
Eric
4/25/2021
The hitch is solid. Tow my 18 deck trailer and 16 dump trailer with no worries. Very nice product.
by: Glen12/01/2018
2005 GMC Sierra
This is a heavy duty 2" receiver trailer hitch (C1523). The 3/8" steel it is made of is the way to go. Aside from the capacity of the hitch one really great features is that the safety chain hook holes are large enough for 3/8" clevis slip hooks. Most hitches don't seem to have holes that are too small.
by: Brent12/05/2017
Ford
I had purchased a 2006 gmc savanna Thomas short bus and needed a hitch for it. The frame was not a normal savanna width. Searching the etrailer site I found drawings of a hitch I believed would work. I needed to enlarge 2 holes to 5/8inch, clean up 2 1/2 inch holes, and drill 2. 1/2 inch holes. In the end I spent more time running to store to get a needed drill bit. The hitch was installed in less then an hour. This was my 2nd hitch from etrailer the last one went on a Ford e350. Had it on in 20 minutes with my sons help. Both hitches purchased were over kill but the xtra capacity is nothing but piece of mind.
by: Stephen05/26/2022
Does the job. Pretty easy to install, other than somewhat heavy (needed a spare set of hands). Had to drop down spare tire to get the hitch up. Even then, spare tire is still touching hitch (tight fit).
by: Stephen 03/22/2024
Fast delivery on a great hitch
by: Tyler05/25/2023
Bolted right up to my 09 Chevy Silverado 1500 LTZ. Thank you
by: Scot01/14/2021
2007 Chevrolet Silverado New Body
Bought this hitch receiver to replace the old rusted out factory hitch receiver. Bolted right up with no need to drop the spare tire. The differences between this hitch receiver and the factory one are night and day. This thing is solid. My truck will pull apart before this receiver hitch fails. Way overkill for my needs, but I will never worry about a receiver hitch failure!
by: Colin07/31/2020
2010 Chevrolet Silverado
Very happy with this. Truly bolt on installation without having to modify anything. Definitely seems much stronger than the factory hitch. Its pretty heavy and awkward to do by yourself but its manageable. It took me roughly 20 minutes from start to finish. I no longer have to worry about my hitch while towing.
by: Tom04/05/2018
2008 Chevrolet Silverado
The hitch fit perfect. I did it by myself. The hitch is very strong, I think my truck will give out before the hitch will!
by: Charlotte 09/02/2022
This is an excellent product. It went on easy and the shipping time was great. I highly recommend this item and buying from this company.
Charlotte
9/3/2023
Great product I would highly recommend
by: Wayne06/09/2021
2011 GMC Sierra
Excellent hitch, arrived fast and installation was quick. I have 2011 gmc sierra did not have to remove the spare tire.
25
197
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Receiver for 2005 Chevrolet Silverado 1500HDThe Draw-Tite Ultra Frame Trailer Hitch Receiver # 41944 is not confirmed to fit on your 2005 Chevrolet 1500HD, it will only fit the 2500HD and 3500HD models. For your Silverado 1500HD I recommend the Curt Trailer Hitch Receiver # C15323. It has a maximum trailer weight of 16,000lbs or 17,000 with weight distribution hitch and 2,400lbs of tongue weight. This will not allow you to carry more than what your truck is rated for. I recommend contacting your dealer with your vin number for...
view full answer... - Troubleshooting Trailer Brakes and Tail Lights Not Working On 2003 Chevrolet Silverado I do see you ordered the Curt Trailer Hitch Receiver # C15323 with the 7- and 4-Pole Trailer Connector Socket # HM40975. As your brakes and trailer tail lights previously worked fine but both no longer work it sounds like it is going to be an issue with the brake switch. You should see your brake controller activate when pushing the brake pedal. You can also test the brakes with the manual override. If your controller works only manually you either have a bad switch or fuse/relay. If the...
view full answer... - What If The Bolt Holes On The Bumper Are Rusted Away On My 2003 Chevrolet Silverado 1500? The 2 bolts that go into the bumper portion of the Curt Trailer Hitch Receiver # C14332 are a required part of the installation. Curt will void any warranty on the hitch if it is not installed properly as per their instructions. There is no way to know how the receiver will respond without those bolts as they did not test the receiver without those bolts installed. If you wish to install this receiver I recommend either having the rusted section cut out and replaced or having the reinforcement...
view full answer... - Recommended Trailer Hitch For 1990 Chevrolet Silverado 4WD Short BedI have another option for you, but the Curt C15322 (now # C15323) is only confirmed to fit select 1999-2014 Chevrolet Silverado's and GMC Sierra's and will not fit your 1990 Chevrolet Silverado 4WD Short Bed. Instead I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15325 which is confirmed to fit your truck as long as it is has the standard or step bumper and is not a crew cab. If your truck is a crew cab then you will need the # C14082 instead. I included...
view full answer... - Does Curt Class V Trailer Hitch C15323 Fit 2005 Chevy Silverado 1500You are correct the Curt hitch part # C15323 is a confirmed fit for your 2005 Chevy Silverado 1500HD and is a Class V. We do not have any replacement step side bumpers that fit your truck as we only have standard bumpers.
view full answer... - High Capacity Trailer Hitch Recommendation for a 2010 Chevy Silverado 1500First, Curt hitch 15522 is going to be replaced with a new model and design so the old hitch will be obsoleted at some point. If the factory hitch is bolted on then you can install a different hitch. If it is welded on you will not be able to use a different hitch. For the most capacity then use Curt hitch # C15323. It is rated for 16,000 pounds gross trailer weight. It also has the square tube design. I have linked instructions for you. Since these ratings exceed the ability of your...
view full answer... - Replacement Hitch for 2011 Chevrolet SilveradoThe pin hole in a hitch can round out, and though it is not a common problem it is something that we have seen happen. In terms of the difference in hitches for your 2011 Chevy Silverado, the higher the class rating the more heavily constructed the hitch is. The Curt class V # C15323, for example, weighs 67 lbs while the class IV # 14301 weighs 53 lbs and the class III # 13322 weighs 31 lbs. That means the thickest material is going to be on the class V, but that may be overkill; I recommend...
view full answer... - Replacement Trailer Hitch Receiver For a 2003 Chevrolet Silverado 1500HD Capable of Towing 12,000LBSThe Draw-Tite Trailer Hitch Receiver # 41932 checks all the boxes for you on your 2003 Chevrolet Silverado 1500HD. It is a bolt on installation with no drilling required, and has a weight distribution rating of 14,000lbs. The 7-Way # PK11893 can be secured using a Mounting Bracket # 18138. If you prefer to have the strongest receiver available the Curt Trailer Hitch Receiver # C15323 has the highest capacity available. It is rated for up to 2,400lbs of tongue weight and a trailer weight...
view full answer... - Mounting Bracket to Attach Factory Trailer Connector on 2000 Chevy Silverado to a Curt Trailer HitchFirst, you are going to have to remove the factory trailer hitch in order to install Curt trailer hitch # C15323. The Curt hitch does not have a feature pre-made to attach the factory wiring harness and connector to the hitch but we have some items that may allow you to transplant it to the new hitch. First, you might be interested in easy mount bracket # C58000 that fits around the receiver on the hitch and has locations to attach a 6- or 7-Way or 4- or 5-Way. I have linked a video for...
view full answer... - Class V Trailer Hitch for a 2007 Chevrolet Silverado Classic 1500If your Silverado has a factory bumper, then yes, the Curt Trailer Hitch, part # C15323, is the hitch that you will want to install on your 2007 Chevy Silverado Classic 1500. This hitch has a max Gross Trailer Weight (GTW) of 16,000 lbs, 17,000 lbs when used with a Weight Distribution (WD) system, and a max Tongue Weight (TW) of 2,400 lbs which doesn't change when using a WD system. Please note that this hitch will not fit SS models. If your Silverado has a deep drop bumper, then you will...
view full answer... - Curt Class V Trailer Hitch Recommendation for 2006 Chevy Silverado 1500HDCurt does offer a Class V hitch that is a confirmed fit for your 2006 Chevy Silverado 1500 HD as the part # C15323 but the part # C15302 is not listed as a fit so it's not the hitch you'll want. I attached an install video for this hitch on a similar 2006 Chevy Silverado HD for you to check out as well.
view full answer... - Recommended Hitch for a 1999 Chevy Silverado The best hitch for your 1999 Chevy Silverado LS is the Curt Trailer Hitch item # C15323. This is a class V hitch with a 2" receiver. It has a massive 16,000 lbs capacity which will not be overrated for your truck. It fits the 1500 and 2500 LD models for that generation of truck. The LS was a trim package that was more interior options than structural changes that would effect fitment of an aftermarket hitch. If you have the stock bumper the Curt item # C15323 will work. Most of the hitches...
view full answer... - Trailer Hitch that Fits Tight Against Bumper on a 2011 Chevy Silverado 1500The B&W hitch # BWHDRH25217 receiver would sit a few inches below the bumper on your 2011 Chevy Silverado. The Class V hitches for the 2011 Silverado 1500 are like that with the other option being Curt hitch # C15323, see video. Curt has a Class III hitch, # 13322, that fits up tight against the bumper. I have linked a video showing installation for you. Draw-Tite also has an option, # 75521, and I have linked a video for this hitch as well.
view full answer... - Recommended Class V Trailer Hitch Receiver For A 2003 Chevy Silverado 2500 Hey David, For a 2002 Chevy Silverado 2500 with a 6.5' bed you'll want the Curt Trailer Hitch Receiver # C15323. You'll want an extra set of hands to help lift the hitch into place but this is an easy peasy installation overall so you can definitely save a few bucks completing it yourself at home. I've attached a short video below where we'll help walk you through the process.
view full answer... - Hitch and Weight Distribution System Recommendation for a 2014 Silverado 1500In a towing setup you always have to use the lowest rated component as the overall towing capacity. The Curt Hitch part # C15323 that you referenced has much higher capacities than what your vehicle has. All that means is that the hitch portion of your setup wouldn't fail if you went above your capacity, but your vehicle would most likely. If the max capacity with weight distribution for your vehicle is 1,200 lb tongue weight and 12,000 total weight that is the max you could do with this...
view full answer... - Does Installation Hardware for CURT Trailer Hitch # C15323 Have Same Weight Capacity as the HitchThe CURT Trailer Hitch, # C15323, is rated for 17,000 pounds gross trailer weight when used with weight distribution. The bolts will be rated the same. You will want to check the vehicle owners manual to determine its specific tow capacities. Whichever is lower, the vehicle or the hitch, is the weight capacity you will need to go by. I have included a link to the installation details for you to view.
view full answer... - Dimensions of Curt Hitches C14006 and this C15323 for a 2015 Chevy Silverado 1500I went and grabbed both hitches that you referenced to get the dimensions you asked about. If you check out all the attached pictures you will see the dimensions you are looking for the Curt # C14006 and # C15323.
view full answer...
- Trailer Hitch that Fits Right Under the Bumper on a 2009 GMC Sierra 1500Yes. The "C" in front of the part number, # C15323, is just how we designate it as a Curt part. The Class IV and V trailer hitches available for your 2009 GMC Sierra 1500 all set at approximately the same location. That is to say with a minimal, if any, gap between the receiver and the bumper. The Class III hitch # 13322 sits up tighter against the bumper, see the linked video, but as a Class III it isn't rated as high as a IV or V. The higher Class hitches are beefier so they may need...
view full answer... - Will the Curt Class V Trailer Hitch Fit a 2002 Chevrolet Silverado 1500Yes, the Curt Class V Trailer Hitch, # C15323, will fit a 2002 Chevy Silverado 1500 LS with the factory bumper. I attached an installation video we made on a 2003 Silverado 1500 for you to check out. I'm sure you are aware of this already, but I'm sort of obligated to mention to check your truck's towing capacity. Even though this trailer hitch can tow up to 16,000 lbs, your truck is only capable of towing between 4,600 lbs and 10,000 lbs depending on how it is equipped. You can verify...
view full answer... - Curt Hitch Recommendation for a 2002 GMC SierraYes, the Curt Hitch part # C15323 that you referenced is confirmed to fit your 2002 GMC 1500HD. To complete your towing setup you may also be interested in the following products: etrailer.com Ball Mount Kit part # EBMK2416. This provides you with a ball mount and two different hitch ball sizes plus a pin and clip.
view full answer... - Will Curt Trailer Hitch 15322 Fit a 2002 Chevy Silverado 1500HDThe instructions for Curt trailer hitch # C15323 do not specify light duty 1500 models or HD models. So I called my contact at Curt and he said that it WILL FIT the HD models as well so you are good to go. I also recommend etrailer ball mount kit # EBMK2416. It comes with 2 balls, a ball mount, hitch pin with clip, and storage bag.
view full answer... - Difference Between Curt Class V Hitches # C15322 and # C15323 For 2008 Chevy SilveradoBasically the part # C15323 replaced the # C15322 which is now no longer available.
view full answer... - Will Curt Class V Trailer Hitch # C15323 Fit a 2001 Chevy Silverado Step SideCurt trailer hitch # C15323 will fit your step side 2001 Chevy Silverado as long as it has the factory step bumper. It will not fit if it has the roll pan or deep drop bumper. The truck having a step side bed does not affect the fit or the instructions. I have included a link to the instructions for you to view. I have also included a link to a video showing a typical installation. I also recommend the etrailer ball mount kit # EBMK2416. It comes with a ball mount, 2 balls, a hitch pin...
view full answer... - Recommended Class V Hitch for 2006 GMC Sierra for Towing 10,800 lb BoatI'd recommend upgrading that hitch, ASAP. If the hitch fails while you're towing, causing an accident, your insurance company would be well within their rights to deny you coverage which would leave you wide open to all kinds of legal liability. Not a pretty situation. Usually, Class V hitches do indeed have a 2-1/2 inch receiver tube. However, companies like Curt Manufacturing, Draw-Tite and B&W have developed Class V hitches with a 2 inch receiver tube that are strong enough to be classified...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Shane H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Joshua S
Video by:
Alan C
Video by:
Zach D
Written by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Alan
11/29/2023
Product is alright. As stated in other reviews, the cut outs for the safety chain hooks are poorly designed.