Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(414 reviews)
Price: $221.63
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13421
Retail:$371.95
Our Price: $221.63
You Save: $150.32
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (414)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13421
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Concealed Cross Tube
- CURT
- 750 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 750 lbs
- Maximum TW when used with weight distribution: 750 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13421 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2024 Honda Passport
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13421
Average Customer Rating: 4.9 out of 5 stars (414 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: James03/15/2024
I installed this trailer hitch by myself. I laid under the suv and pulled the hitch up onto my stomach. Lifted each side into place. Fit perfectly over the threaded bolt holes. Had it installed in less than 30 minutes. I’m 73 years old and this is the third hitch I purchased from etrailer. All of their products have fit perfectly with no issues.
by: David04/01/2024
Honda Passport
From start to finish approx 50 minutes. Strapped the hitch to my motorcycle lift,pushed and aligned under my 2021 Honda Passport and proceeded to tighten weld bolts. Incredible ease of use and saved myself $1000 for an install at the shop. Well designed and great finish.if you like to accomplish things by yourself while saving a ton of money,this product does it. Would highly recommend this product to others.
by: Rich01/12/2024
Installed a Curtis Class 3 hitch that arrived from etrailer.com in less than 2 days onto new 2024 Honda Passport. Took only 15 min from the garage floor, no lift or jacks needed. Saved me $1,500 from dealer and $350 and 3 weeks from Uhaul. Awesome product & experience!!!
by: Anthony04/06/2024
Honda Passport
The hitch has been working as it should. I use it for my bike hitch and charge boxes. Very easy to install with the right torque wrench. The 2 inch receiver feel way more secure and stable. Would recommend to anyone looking for a new hitch for a Passport.
by: Andy04/03/2024
6 bolts and it was on! - very easy. Did it on my own, using jack stands. Highly recommended.
by: Brian05/31/2023
This is my second time buying custom fit trailer hitch from you and both times the service was right on from placing the order and shipping.It was installed 30 minutes after delivered. Also both were custom fit and they were the fit my vehicles and install was not hard.
by: John 03/19/2024
I called e trailer and described what I wanted. the rep (Will) answered all my questions. My trailer hitch and wiring was delivered quickly and there were no problems, no hassles. I would recommend e trailer. Very satisfied.
by: Eugene 11/09/2022
Honda Passport
What is there not to like. My wife and I with a small hydraulic jack to help stabilize installed this hitch on our new Honda Passport in under a half hour. I did have the benefit of a 1/2” impact gun. Oh and I am 74 yrs old. This hitch is very nice and everything is tucked under the vehicle so all you see is the receiver tube.
by: David 03/21/2023
2022 Honda Passport
Install Video was right on and very nice hitch. But most impressive was the order process. From the minute they receive your order they are documenting the whole process for you to see. Who is handling the order, packaging etc right up to delivery. I have never seen anything like this VERY NICE!
David
3/22/2024
Excellent
by: Clarence from Guam USA11/19/2023
2023 Honda Passport
Very easy to install. Sturdy construction and excellent fit and finish. Had some issues ordering online but customer service reps were fantastic in resolving. Thank you etrailer.com for a pleasant purchase experience!
by: Gregory 12/03/2022
Honda Passport
2022 Honda Passport. Hitch is more expensive than hitches for other vehicles by about $49 in some cases.
Not much difference between hitches except for fitment.
Gregory
12/4/2023
After one year the trailer hitch is working fine. 30 minute install time is probably good under optimal conditions. At 71 years of age and rolling around on the ground, 30 minutes is about 3 12 hours light. Plus I was shy of the torque on the bolts even with some decent leverage.
by: Luke 02/09/2024
Everything fit well and installed like it should. Hitch and wiring harness work great. Perfect for me.
by: Joseph 02/17/2024
Excellent service I have not installed the trailer hitch parts but they look to be of great quality and was shipped to me very quickly and at a good price thanks!
by: Justin 02/17/2024
Honda Passport
Perfect fit on my 21 Honda passport. A bit heavy, 2 person installation preferred but I did it alone with a floor jack and a little muscle lol other than that. That shipping was fast, it came in 2 days faster than expected.
by: Marty G.02/02/2024
2019 Honda Passport
Excellent company to deal with. Easy to order and very helpful as to make sure it would fit to my vehicle. The package arrived a day early which was a nice surprise. Easy to install , heavy duty hitch and works perfectly. Price was very reasonable. Very satisfied.
by: William 08/29/2022
This trailer hitch was machined perfectly to fit all 4 bolts with clearance… no ‘file to fit’ effort required. Professionally fabricated and machined. Easy install.
William
8/30/2023
One year later, the trailer hitch continues to meet all expectations.
by: Marvin Anthony04/09/2023
2023 Honda Passport
You service was amazing. It’s an easy installation. I definitely recommend this hitch.
by: Michael M.10/06/2022
2022 Honda Passport
Ordered this hitch for my new 2022 Passport Trailsport on a Saturday night and received it the following Thursday. Packaging was great and there was no damage to the hitch.
Took about 30 minutes to mount it. Highly recommend a second person to thread the first 2 bolts while you hold it in place. After that put some orange loctite on, spun the bolts in with an impact wrench and followed with my 1/2" torque wrench.
The hitch is strong, well built with nice welds and a nice finish. Bolts provided are high quality 10.9 grade with some beefy washers.
Very happy with this purchase and know I can get that last dump load run in before winter.
by: Angel11/03/2023
etrailer is my favorite online store hands down!! Everything I’ve ever ordered has always exceeded expectations!!!
by: Alexis 02/05/2024
2022 Honda Passport
I used ratchet straps and a jack to aid in installing. Difficult to install on your own. Quality and fit are great!
by: John 11/25/2023
2020 Honda Passport
The hitch is very well made, looks good, and fits and installs without any problems. The hitch is also a straight bolt on with the only hard part being holding it in place while starting the bolts which is the hardest part of the installation.
by: Jessica09/29/2022
2022 Honda Passport
The install of the hitch was easy, and it looks great. The best part of the whole thing was working with etrailer. Their customer service was above and beyond. They were in contact with me the whole way with a personalized email when the order was placed, when it shipped, and when it was delivered. And the price was so affordable. An OEM receiver from Honda was going to be $230 just in freight. The shipping from etrailer was free. Overall a great experience!
by: Dan 04/04/2023
Just had it installed and looks good!
Dan
4/5/2024
Great...no issues
by: Will01/31/2024
2024 Honda Passport
The hitch was really easy to install. Honda did a great job of putting the captured nuts into subframe and providing ample room without interferences. It just lifts into place.
by: Thomas06/30/2023
It was a perfect fit. Came with everything I needed to install it. It is heavy, so having two people is recommended. It Works & looks just like I had hoped.
25
512
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Does the Bumper Cover Have To Come Off To Install Curt Hitch On a 2019 Honda PassportThe Curt Trailer Hitch Receiver part # C13421 which is a fit for a 2019 Honda Passport will not require you to remove the rear bumper cover so the installation process is super easy, taking most only around 30 minutes to install. This is a great option with hidden cross tube design that makes for the best overall appearance. In regards to installation, simply raise the hitch into position and tighten down the bolts but that's it.
view full answer... - Trailer Hitch to Use a Bike Rack on a 2023 Honda PassportThe Curt Trailer Hitch Receiver # C13421 is confirmed to fit your 2023 Honda Passport and will allow you to use your bike rack. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
view full answer... - Is There a Hitch for the Elite Model of the 2022 Honda Passport?The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C13421 is a confirmed fit for all models of the 2022 Honda Passport including the Elite. If you are planning on towing then you will need the Curt T-Connector Wiring Harness item # C56291, the Mounting Bracket item # 18140, and a ball mount kit like the Curt Fusion Ball Mount Kit item # C45154.
view full answer... - Curt Trailer Hitch Confirmed to Fit the 2022 Honda PassportYes, the Curt Trailer Hitch Receiver # C13421 is confirmed to fit all models of the 2022 Honda Passport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bikes racks, cargo carriers and ball mounts. If you plan to do any towing, you can pick up the Curt T-Connector Vehicle Wiring Harness # C56291 and the etrailer Ball Mount Kit # 989900 to round out...
view full answer... - Curt vs. etrailer Trailer Hitch Receivers For 2023 Honda PassportThere is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Honda Passport, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your '23 Passport are the following part numbers: - etrailer Trailer Hitch Receiver # e44AR - Curt Trailer Hitch Receiver # C13421 The matte black finish is nice as it hides the inevitable dings, scuffs and scratches...
view full answer... - Recommended Hitch for a 2023 Honda PassportThe best hitch for your 2023 Honda Passport is going to be the Curt Trailer Hitch Receiver item # C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it installs right below your rear bumper cover and and the only portion visible is the 2" x 2" receiver. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. So you will have plenty of ability to haul cargo in...
view full answer...
- 2019 Honda Passport Trailer Hitch Compatibility with Hands Free Lift GateBoth the Draw-Tite # 76290 and the Curt # C13421 are confirmed to fit your 2019 Honda Passport. They both state that the hands free sensors may be obstructed and function will be limited or possibly even lost. We haven't yet installed that hitch on your model year so we don't have the ability to give any further information on that. Sometimes sensors can be adjusted or repositioned to allow function of the hands free lift gate so I personally wouldn't hesitate but it may take a little...
view full answer... - Is There an Aftermarket Hitch for the 2022 Honda Passport that Will Install Behind the BumperWhile I have a great hitch option for you, there is not an aftermarket hitch available that will install behind the bumper panel like the factory hitch. But the Curt Trailer Hitch Receiver # C13421 is still going to be a great option for you that will sit just below the bumper. I have included a picture of how this hitch will look. This hitch is also made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver which is the most common size used for hitch...
view full answer...
- Hidden Hitch Recommendation for 2022 Honda PassportFor your 2022 Honda Passport the hitch I recommend is the Curt part # C13421 as it has great towing capacities and is mostly hidden since only hitch opening hangs below rear bumper. This allows it to be the least visible and also helps with ground clearance. I attached an install video for this for you to check out as well.
view full answer...
- Will Curt Hitch for 2019 Honda Passport Allow Hands Free Lift Gate to OpenThe Curt hitch part # C13421 that fits your 2019 Honda Passport will not interfere with the hands-free liftgate feature. You will likely have to kick your foot to one side of the receiver as opposed to the middle but that would be it.
view full answer... - Will the Curt Hitch C13421 Interfere With the Lift Gate Sensor on a 2021 Honda PassportThough the Curt # C13421 will definitely fit your 2021 Honda Passport, installing any hitch may interfere with Hands-free Liftgate sensors and functionality may be very limited or possibly lost. However, it is exceptionally rare for the use of the sensor to be completely lost. Typically you will just need to mess with it a little to find the spot where your foot will activate it and you will be good to go. If you check out the install video I included, the sensor is talked about as well.
view full answer... - Trailer Hitch For 2020 Honda Passport With Best FinishThe Curt # C13421 and etrailer brand # e44AR Class III hitches have the most durable finish and would be a fit for your 2020 Passport. The only difference between the two is the sheen on the finish. The Curt uses a glossy powder coat finish, the etrailer uses a matte finish. I personally prefer the matte finish, as it tends to blend in with the underside of the vehicle a little better. Keep in mind, that even though the hitches use a quality powder coat finish, the hitch will occupy a...
view full answer... - Is the Curt C13421 Trailer Hitch the Correct Fit For a 2023 Honda PassportYes, the Curt Trailer Hitch Receiver # C13421 is the correct hitch for your 2023 Honda Passport to carry your bike rack. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories like your bike rack.
view full answer... - Does Install Of Trailer Hitch On A 2022 Honda Passport Require Fascia Trimming Out of the trailer hitches that are confirmed to fit your 2022 Honda Passport I recommend The Curt Hitch # C13421. The installation of this hitch does not require trimming of the bumper fascia. It also does not require drilling or welding so there will be no modifications made to your vehicle during the installation process. Another cool feature about the Curt Trailer Hitch is that it has a hidden design after the installation, so the cross tube will be tucked away behind the bumper and...
view full answer... - Does Curt Hitch for 2019 Honda Passport Install Below the BumperYes, the Curt Trailer Hitch Receiver # C13421 for your 2019 Honda Passport will sit right below the bumper, as shown in the attached photos. It installs ridiculously easily in two steps: 1. Raise hitch into position and secure with the provided M14 bolts and 9/16" conical washers. NOTE: Weldnut cleaning may be required prior to installation. A nylon tube brush like # 814092 and some spray lubricant is all you need. 2. Torque M14 bolts to specs listed in the included installation instructions. I've...
view full answer...
- Is a Hands-Free Relocation Sensor Bracket Needed for Curt Trailer Hitch on 2019 Honda Passport The Curt Trailer Hitch Receiver part # C13421 is a fit for a 2019 Honda Passport and will work on models with the hands-free tailgate sensor. That said, the sensor may be limited or restricted in use so in order to fix this you can obtain a relocation bracket from Honda, the Hands-Free Power Tailgate Sensor Relocation Bracket 08L91-TGS-100A. In order to complete the towing setup you'll need the Curt T-Connector Vehicle Wiring Harness part # C56291 to activate the trailer lights and the...
view full answer... - Correct Hitch From Curt for a 2022 Honda Passport and Wiring HarnessThe correct hitch from Curt for your 2022 Honda Passport is going to be the Curt Trailer Hitch Receiver # C13421. This hitch from Curt is a confirmed fit on all models of the 2022 Honda Passport. The correct wiring harness for your Passport is going to be the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat # C56291. This T-Connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, on the driver's-side. You will need to remove all floor coverings...
view full answer... - Trailer Hitch Receiver and Wiring for 2021 Honda Passport SportFor the best fit and safety the custom fit hitches by Curt # C13421 and Draw-Tite # 76290 are your best options for your 2021 Honda Passport. These hitches are custom fit so that you will not have to drill into your frame or modify any of your bodywork. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 as it has the tabs mounted to add the 7-way directly to the receiver. The T-One Vehicle Wiring Harness # 118291 will plug into the connectors on your Passport and give...
view full answer... - Can A Weight Distribution Hitch Equalizer Be Used On A 2021 Honda Passport Touring AWD?You can absolutely use an equalizer bar, also known as weight distribution hitch, on your 2021 Honda Passport. You will want to check the owner's manual or verify with Honda, but I am showing that your Passport has a towing capacity of 5,000lbs. As long as you have a class 3+ receiver on your vehicle, such as the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13421, you will be good to go. I recommend looking at the Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole...
view full answer... - Tools Needed for Curt Trailer Hitch on 2022 Honda PassportThe socket size required to install the Curt Trailer Hitch Receiver part # C13421 on a 2022 Honda Passport 2022 Honda Passport is a 22MM. I have attached a list of all other tools required for the install per Curt. - Ratchet - 6" Socket Extension - 22MM Socket - Torque Wrench - Wire Pipe Brush - Safety Glasses
view full answer... - Is There A Hidden Hitch For A 2023 Honda Passport After doing some research The Curt Trailer Hitch Receiver # C13421 will be hidden the most compared to the other trailer hitches. The OEM hitch you can get from the factory is a little more hidden but barely. The Curt hitch will all be hidden besides the 2 inch receiver head. I like the Curt hitch because it is manufactured in the USA, and has a bolt on installation with no welding required. To be able to tow your trailer you will also need The Curt T-Connector Wiring Harness # C56291....
view full answer...
- What Hitch and 4-Way Wiring Harness do You Recommend for My 2022 Honda Passport Sport?Yes! The Curt Hitch # C13421 will definitely fit your 2022 Honda Passport Sport model. As far as the correct 4-way harness, you will need the Curt T-Connector Vehicle Wiring Harness # C56291. If you plan on towing a light utility trailer, I also recommend a ball/ball mount like the ones included in the Curt Towing Starter Kit # C45534. Not only does this kit include a locking hitch pin, it also includes a hitch cover as well.
view full answer... - Curt Hitch Confirmed to Fit a 2022 Honda Passport and 4-way Wiring HarnessYes, we have a Curt hitch for you. The Curt Trailer Hitch Receiver # C13421 is confirmed to fit all models of the 2022 Honda Passport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. The Curt T-Connector Vehicle Wiring Harness # C56291 is confirmed to fit all models of the 2022 Honda Passport and will provide...
view full answer... - Does the Curt 13421 Hitch Fit on a 2019 Honda PassportYes. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13421 is a confirmed fit on the 2019 Honda Passport, and will provide you with a 2" receiver for your vehicle that is ideal for both towing and carrying hitch mounted accessories. If you're planning on towing with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For wiring, I recommend using the Curt # C56291, which will provide you with an easy to install harness with a 4 way trailer plug. For...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Test Fit:
Andrew K
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Bradley B
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Dustin K
Video by:
Aidan B
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Eugene
11/11/2023
The hitch always worked great. My Honda was recently damaged in a minor rear end collision and the body shop was going to replace the hitch with a Honda factory hitch but I gave them the info for E-Trailer and insisted on the C13421. I did not think the hitch needed replaced because the paint was just chipped but we are back to new and all is well. Great Hitch.