bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 6000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13309
Retail:$308.95
Our Price: $212.53
You Save: $96.42
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 44 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13309 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (50)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13309

  • Class III
  • 2 Inch Hitch
  • 6000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 900 lbs TW
  • 6000 lbs WD GTW
  • 900 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 900 lbs
      • Maximum TW when used with weight distribution: 900 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13309 Curt Class 3 Trailer Hitch Receiver

Installation Details C13309 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13309

Average Customer Rating:  4.8 out of 5 stars   (49 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:
2016 Nissan Pathfinder

Very nice hitch. Powercoat is nice and thick so corrosion won't be an issue. I tried to order one that would fit in the factory opening in the bumper ,but as you can see it fits below with some minor trimming.

Mike

8/24/2020

Working great, no issues



by:

Easy install instructions.



by:

I installed this hitch myself, it took about 1 1/2 hours. The electrical harness and relays were easily installed with little electrical or mechanical knowledge. The video made it simple. I have used my hitch many times and I have had no issues with the mounting or the electrical. I’m glad I purchased it!



by:
Nissan Pathfinder

The service from etrailer was very good and professional and the video's very helpful to use, I installed it with a in about 30 minutes. the quality of the hitch is good and constructed well, we have used it 4 times since purchasing it. It especially helpful to use during the holidays to make room for all of our packing. we have a Nissan Pathfinder. the only thing I would recommend is buying a 2 inch trailer hitch rise, because when the cargo basket is fully loaded it can scrape the drown goin up or down sloped driveways.



by:

Great product and easy to install. Etrailer was helpful in making sure I purchased the right hitch.

Thomas F.

5/2/2021

Hitch is working great.



by:
Nissan Pathfinder

Solid. I tow a 20 Foot Pontoon. with a Pathfinder. 6 or 7 times a summer. I have to use an 8" Rise receiver to get the trailer leveled off. If I had the hitch at the factory height i could probably use a 4" riser. Other than that, I can't complain. The kit came with all the electronic parts needed to " Go Live" and tow.



by:
Volvo Cross Country

Worked great for towing a cargo rack on my cross country trip!



by:

Product came fast and seems solid all around(haven't tested it yet), definitely a two person install job. Everything fit okay, when it was in position, doesn't clear bumper(have to push it out and remove brackets). Also, the videos showed a spot to mount the electrical, this one is missing that feature, I had to get crafty and use U bolts and L brackets to make my own mount for the electrical stuff.



by:

Great hitch. Fit perfectly and was really well built. A big Thank you to etrailer for their help in making my order right. Package was damaged in shipping, and they went out of their way to make it correct. Thanks again.



by:
2018 Nissan Pathfinder

This class 3 hitch came on time, good price. It's going on a 2018 Nissan Pathfinder, not exactly a tow-truck but primarily to be used to mount a bike rack. The hitch is extremely sturdy and well built with good powder coat paint. I'd buy it from you again.



by:
2017 Nissan Pathfinder

Hitch appears to be good quality and will do the job. It was not too difficult to install but a second pair of hands would have been nice. Happy with this hitch and the service from etrailer.



by:

This is the second hitch I’ve ordered from etrailer and have been very happy both times. The first one arrived the day after the early received date but it was due to a snow storm and the second arrived a day before the received window. Both were the free shipping option so still very fast. The videos are super helpful for install.



by:
2017 Nissan Pathfinder

Very easy to install. Super clear instructions.
Can be installed without any ramp, just slide down on a mat.
Installation required to cut a small piece of plastic from fascia, I did it using occilating multitool.
Need to have ratchet with 6/10 inch extension



by:
2019 Nissan Pathfinder

I ordered the hitch and it was delivered quicker than I anticipated. It came in a box that had a few holes in it. Turns out the hardware and instructions were missing from the box.

I called customer service and they were very friendly and helpful. They sent replacement hardware and instructions and I received the replacements the day after I called them at no extra charge.



by:
2017 Nissan Pathfinder

excellent service on the phone with timothy. hitch and wiring fit perfectly. very pleased with the video about installation. helpful. thank you



by:

Great Hitch, easy to install. Tow a very tongue heavy trailer- handles beautifully.



by:
2018 Nissan Pathfinder

The hitch was a perfect fit for my 2018 Nissan Pathfinder. I plan to be pulling a camper real soon. This looks factory installed. Great product.



by:
2019 Nissan Pathfinder

Have not attached this to the car yet. My wife mistakenly thought the wiring package was included. Item was shipped as quickly as promised and just arrived this afternoon.



by:

The trailer is good! I’ve been hauling 6ft trailer several times. It works perfect.



by:

This hitch installed exactly as the instructions said. Couldn't be happier!



by:

Great hitch, it took me 1.5 hrs to install, and as always etrailer gives awesome customer service!!!



by:
2018 Nissan Pathfinder

Installed on a 2018 Pathfinder. Perfect fit, nice "factory" look. Very beefy, well-made two bar. I did not have help but by hooking the passenger side over the muffler it held it enough to get a driver's side bolt started.



by:
2015 Nissan Pathfinder

Great fit, easy installation and fast shipping.
Company
does care about their product and I love video manuals they create.



by:
2020 Nissan Pathfinder

Product arrived on time. Tow package easy to install. Will be a big help this summer pulling the boat.



by:
2020 Nissan Pathfinder

The hitch is great it was a little difficult installing it but after installing it was great.


25
49
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Can Trailer Hitch Installed on 2016 Nissan Pathfinder Be Moved to 2019 Model?
    The answer to your question will depend on which hitch you have installed on the 2016 Pathfinder. If it's a Draw-Tite # 76031, it can be removed and installed on your 2019 Pathfinder. If you have the Curt # C13126, it will NOT fit on your 2019 Pathfinder. The correct Curt hitch fit for your 2019 would be part # C13309.
    view full answer...
  • Does Draw-Tite or Curt Hitch Have Better Ground Clearance for 2019 Nissan Pathfinder
    When we installed the Draw-Tite # 76031 and Curt # C13309 trailer hitch receivers on a 2018 Nissan Pathfinder - which is the same body as a 2019 Pathfinder - we found that the Draw-Tite had both better ground clearance and better bumper clearance. The Curt measured 14 inches from the ground to the top of the hitch with 5 inches from the hitch pin hole to the end of the bumper, while the Draw-Tite measured 14-1/2 inches from the ground and 4 inches from pin hole to the end of the bumper. Due...
    view full answer...
  • Trailer Hitch for 2018 Nissan Pathfinder That Has Discrete Appearance
    We offer two brands of 2-inch hitches for your 2018 Nissan Pathfinder, and one of these, the class III Curt # C13309, is designed with a concealed cross tube that lets the vehicle keep more of its stock appearance. The included photo shows you the Curt hitch installed. The other hitch, class IV Draw-Tite # 76031, offers slightly easier installation but it will be more visible once installed. For a clean and discrete appearance the USA-made Curt hitch wins. The written instructions and...
    view full answer...
    Image 1 for
  • Comparison of 2018 Nissan Pathfinder Trailer Hitches
    For your 2018 Nissan Pathfinder, the hitch manufacturers have all specified the same weight capacities. Curt # C13309, Draw-Tite # 76031, and etrailer # e98908 all have 900 lb tongue weight and 6,000 lbs towing capacity. I recommend the least expensive options at the time of purchase because they all are great quality hitches with the biggest difference between them being the etrailer hitch has a flat/matte black finish versus the high gloss black of the other two.
    view full answer...
  • Trailer Hitch Recommendation for 2020 Nissan Pathfinder
    For your 2020 Nissan Pathfinder we have the Curt hitch part # C13309 as a confirmed fit that would work really well. It has a hidden crosstube so it's mostly out of plainsight, installs easily, and has great towing capacities. I attached a picture of what the hitch looks like installed as well as an install video too.
    view full answer...
    Image 1 for
  • Best Trailer Hitch for 2019 Nissan Pathfinder
    Hands down the best trailer hitch for your 2019 Nissan Pathfinder is the Draw-Tite Trailer Hitch # 76031 over the Curt Trailer Hitch # C13309 because it has the better clearances as well as the easier installation. The Draw-Tite hitch has better ground clearance than the Curt, has better bumper clearance, and does not require either lowering the spare tire to install or trimming the fascia under the bumper, which are both steps necessary to install the Curt hitch. I have added links to...
    view full answer...
    Image 1 for
  • Recommended Hitch, 7-Way Connector, and Mounting Bracket for a 2020 Nissan Pathfinder
    I'll start out by confirming that the Curt Hitch item # C13309 you were looking at does fit the 2020 Nissan Pathfinder. I have attached an installation video below along with the instructions so you can see how to get it set up. To add a 7-way connector, I recommend the T-One Vehicle Wiring Harness item # 118273. This custom-fit T-One connector plugs into your Pathfinder's factory tow package wiring harness, which is located just behind the rear bumper, near the center of the vehicle....
    view full answer...
  • Best Trailer Hitch Receiver And 7-way Connector For Towing 3500lb TT W/ 2018 Nissan Pathfinder
    For your 2018 Nissan Pathfinder I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13309 you mentioned as it has a hidden crosstube meaning the only visible part of the hitch is the actual receiver where the Draw-Tite # 76031 you were looking at will have the crosstube and the receiver visible. Both the # C13309 and # 76031 have the same 900lb tongue weight rating and 6000lb trailer weight rating so you will not be sacrificing any towing capabilities...
    view full answer...
  • How to Mount a 7-Way Connector on a 2017 Nissan Pathfinder with the Curt Hitch # C13309
    If you were to install the Curt Trailer Hitch Receiver # C13309 on your 2017 Nissan Pathfinder then you would need to mount the Curt T-Connector # C56357 directly to your rear bumper fascia using the mounting bracket # PK12711U. To avoid this you can use the Curt Easy Mount Bracket # C58000 instead. Since the Draw-Tite Trailer Hitch # 76031 does sit below the rear bumper fascia you would be able to use the no-drill mounting bracket # C57202 along with the part # PK12711U. The Curt T-Connector...
    view full answer...
    Image 1 for
  • Should Trailer Wiring Be Installed with Trailer Hitch or Can it Wait til Later
    Trailer hitch installs and trailer wiring installs are totally separate processes. It wouldn't be a situation where "well, you're already half way there may as well do the wiring too." So if you wanted to start with a hitch now like the # C13309 and then do the wiring part # C56281 now or at a later date you'd have the same amount of work either way. I attached install videos for both of these for you to check out as well.
    view full answer...
  • Can the Curt # C13309 Trailer Hitch be Installed on a 2018 Nissan Pathfinder with Liftgate Sensors
    Yes, you can install the Curt Trailer Hitch Receiver # C13309 on your 2018 Nissan Pathfinder even though it has the kick liftgate sensors. The only potential difference is that you may just have to kick to the left or right of the receiver instead of just waving your foot beneath the bumper. There is some minor fascia trimming that needs to take place and the driver side tow hook will need to be removed to install the trailer hitch, but Curt has only rated the install a 5 out of 10 for...
    view full answer...
  • 7-Way Vehicle Connector for 2020 Nissan Pathfinder
    Since your 2020 Nissan Pathfinder has the factory towing package, I recommend the Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector item # 118273. This wiring harness attaches below your vehicle into the existing factory ports. I have attached a picture and linked an installation video to help guide you through the install process. I also recommend purchasing the Curt Towing Starter Kit for 2" Hitches item # C45534. This kit will provide you with...
    view full answer...
    Image 1 for
  • Comparing Curt and Draw-Tite Trailer Hitch Receivers for a 2020 Nissan Parthfinder
    The main difference between the Curt Trailer Hitch Receiver part # C13309 and the Draw-Tite Trailer Hitch Receiver part # 76031 for a 2020 Nissan Pathfinder is appearance. The Curt hitch has a hidden design so the crosstube is hidden behind the bumper and the Draw-Tite hitch has a visible crosstube so it will be shown below the bumper. The hidden design offers better ground clearance and looks better overall so this is what I recommend. I have attached an install video I did below as well.
    view full answer...
  • Towing a Trailer and Carrying Bikes at the Same Time with a 2018 Nissan Pathfinder
    There are ways to accomplish what you want but there are some other things to think about first. The most important thing to consider for your situation is how much rise or drop you need to tow the trailer level. Because if an adapter is used (or even if it isn't) then the ball mount has to have the right amount of rise or drop to tow the trailer level. So if we look at the available hitches the one that will provide the most ground clearance is # C13309 (excludes platinum models). Once...
    view full answer...
    Image 1 for
  • Comparison of Draw-Tite and Curt Trailer Hitch Receivers for a 2017 Nissan Pathfinder
    I prefer the Curt, part # C13309, over the Draw-Tite, part # 76031, for a trailer hitch receiver on your 2017 Nissan Pathfinder. I like how the Curt hitch is mostly hidden behind the rear bumper and the only part you see is the receiver opening and safety chain loops. With the Draw-Tite you can see part of the crosstube under the bumper. Although, it doesn't require any fascia trimming and the price is better. I've linked a video from when we installed the Draw-Tite on a Pathfinder...
    view full answer...
  • Recommended Trailer Hitch and Wiring Harness for 2017 Nissan Pathfinder
    The trailer hitch I highly recommend for your 2017 Nissan Pathfinder is the Curt # C13309 because it has a concealed crosstube and is a bolt-on installation that will not require drilling into your vehicle's frame to install. This Class III, 2" trailer hitch is almost entirely hidden behind your bumper, has a black powder coat finish to protect it from corrosion and also has a 6,000 lb towing capacity and 600 lb tongue weight capacity. The Curt # C13309 is made in the USA and comes with...
    view full answer...
  • Does Curt Hitch for 2020 Nissan Pathfinder Affect Sonar Sensors
    The Curt hitch part # C13309 that you referenced is a confirmed fit for your 2020 Nissan Pathfinder and would not affect the sonar sensors the vehicle has in the rear bumper.
    view full answer...
  • How To Mount A 7-Way Connector On A 2019 Nissan Pathfinder With The Curt Hitch C13309
    To install a 7 -Way connector you will need the T-connector and mounting bracket compatible with your 2019 Nissan Pathfinder. I recommend the T-One Vehicle Wiring Harness for Factory Tow Package # 118273 as a simple, plug and play solution that does not require splicing of wires to install. The 2 connectors are found usually in the far rear drivers side compartment. The Mounting Bracket and Installation Hardware # PK12711U will then help in providing a clean look for your 7-Way connector....
    view full answer...
  • Availability of Concealed Trailer Hitch for 2018 Nissan Pathfindeer
    The hitches we offer would all install so that the receiver tube sits directly under the rear bumper, such as the Curt Class III hitch, part # C13309. In order to get a hitch like what you described, you'd need to get the OEM hitch from Toyota, as well as the specific bumper cover with the knockout for the receiver to pass through. If the hitch can be installed aftermarket, it will be very expensive. I certainly understand why you'd want a hitch to install through the bumper fascia, trailer...
    view full answer...
    Image 1 for
  • Bracket for Mounting 7-Way Install on 2019 Nissan Pathfinder with Curt Hitch
    Since the Curt hitch part # C13309 that fits your 2019 Nissan Pathfinder doesn't have a trailer wiring bracket (none of the hitches for your vehicle do) the best options is to use a bracket # PK12711U attached to the lower rear fascia so that you can easily mount the 7-way kit that also fits your vehicle part # C56357. I attached a picture that shows what the wiring connectors look like at the rear of your vehicle as well.
    view full answer...
    Image 1 for
  • Curt Trailer Hitch that Fits 2019 Nissan Pathfinder
    We have a similar Curt hitch that fits your 2019 Nissan Pathfinder with the part # C13309 but the # C13900 that you referenced does not fit your vehicle.
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2018 Nissan Pathfinder
    The trailer hitch I recommend for your 2018 Nissan Pathfinder is the Curt hitch part # C13309 because it has plenty of towing capacity, is made in the USA, and has a concealed crosstube which means it will be less visible than most hitches. For trailer wiring I'd then recommend the Tekonsha 4-Way part # 118670 which comes with all of the needed relays and harnesses to install without requiring any splicing. I attached an install video for this for you to check out as well. Since you...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch and Wiring for Max Towing Capacity on 2018 Nissan Pathfinder
    I took a look at the online version of the owner's manual for your 2018 Nissan Pathfinder and it states that the vehicle has a maximum towing capacity of 6,000 pounds. I do recommend verifying this in your copy of the manual as well. For a trailer hitch that will work perfectly I recommend the Curt Class III Trailer Hitch Receiver # C13309 which has a 6,000 pound capacity to match the Pathfinder's limits and a nice hidden crosstube design where only the 2 inch receiver will be visible....
    view full answer...
    Image 1 for
  • Trailer Wiring Kit and Hitch Recommendation for 2019 Nissan Pathfinder
    For a 4-way trailer wiring harness for your 2019 Nissan Pathfinder I recommend the # 118670 which installs very easily and comes with everything needed to give you the 4-way you'll need to tow your pop up. I attached an install video for this on a similar 2018 Pathfinder. If you needed a hitch too the Curt Class III part # C13309 is a really great option too. It has plenty of capacity and is mostly hidden since only the hitch opening hangs below the rear bumper.
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Written by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.