Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(62 reviews)
Price: $216.11
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13300
Retail:$340.95
Our Price: $216.11
You Save: $124.84
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (62)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13300
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Visible Cross Tube
- CURT
- 400 lbs TW
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13300 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1995 - 2005 Chevrolet Blazer
- 1996 - 2004 Oldsmobile Bravada
- 1995 - 2004 GMC Jimmy
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13300
Average Customer Rating: 4.9 out of 5 stars (62 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Mark 02/11/2024
No problems. Delivery was prompt and the hitch fit without problems except I misread the instructions but was easily corrected
by: Ray10/08/2021
2002 Chevrolet Blazer
looks great and did not have to remove spare tire.
by: Noah05/03/2018
2003 Chevrolet Blazer
Took a little longer than expected with the rusted bolts on my blazer. Other than that it went on rather easy. Excited to use my new hitch!!! I plan on pulling a small utility trailer and Jon boat with it. What I like already with this hitch is that during the install the hitches steel brackets are thicker than my blazer frame. I feel more than comfortable with this hitch on my vehicle. Second time ordering from Etrailer and will order again in the near future!!!
by: Sergio05/20/2020
Super easy to install! Looks to be a great quality hitch and very strong as well! It arrived in a timely manner and I highly recommend etrailer.com to anyone! Time to hook my new boat up and take the family fishing! Thanks!
by: Lou08/08/2016
2000 Chevrolet Blazer
Received tow hitch today as described very well built unit all hardware included. Installation was easy and the unit fit like a glove. Thanks etrailer.com
by: Chris02/16/2024
2002 Chevrolet Blazer
Fix,n to go put it on now looks great I'm sure it's going to b just fine thanks
by: Thomas 08/17/2023
2001 Chevrolet Blazer
Great receiver, excellent customer supp ort
by: Mac 09/10/2020
Excellent experience! The hitch I ordered arrived before I expected it to and is in great shape. The video on the website clearly shows how to install the hitch. Thank you etrailer.com for the awesome installation videos.
Mack
9/11/2021
Excellent! Couldn’t be happier with it.
by: Randy G.01/29/2016
Chevrolet Blazer
First class hitch delivered in perfect condition and it only took a few days.
WOW!!
I'm positive this will fit my blazer just right and hauling my sailboat will be easy using this beauty.
The round design gives it a sleek look.
Thanks for the support pages too! It all helps
Randy G.
1/29/2017
GREAT! Works and looks perfect.
by: Scott12/16/2020
2001 Chevrolet Blazer
Perfect fit! I would highly recommend this product! Easy to install once you get the old one off! Holes line up without modification!
by: Zach S09/30/2016
Solid product and easy to install! The instructional videos and customer service are top notch! I have purchased 2 hitches and a cargo carrier and will always return to E-trailer for trailer accessories.
by: Billy W02/22/2020
No complaints here! Has done an amazing job with towing when needed. The installation was fairly simple and it's probably the strongest part on the 19 year old truck! Haha
Would definitely buy from this company again when I'm in need of another hitch, and will certainly spread the word to others if asked where to get a quality product.
by: George T.06/25/2014
2003 Chevrolet Blazer
Great product. Took 20mins on my own to install on my 2003 Chevy Blazer. I would just mention that it is a good idea to run a 1/2" drill through the existing chassis rail holes before you install the hitch...other than that its an easy install. Looks great on the vehicle. Delivery was fast. Highly recommend using e-trailer and their products.
by: Sage03/12/2020
Hitch was delivered on time. As stated, it bolts directly to existing holes. It's takes a little longer to mount than 30 minutes, but the main reason is because the existing bolts are usually coated with semi- permanent loc-tite. I would recommend using a longer handled 1/2 socket wrench to reduce time, (and a pair of impact mechanic's gloves to protect hands.) I couldn't be MORE satisfied with the price, quality and reasonable ease of installation of this hitch! Many times reviews of products are very generic and almost obligatory. I am truly satisfied and would give etrailer a 10 out of 10! I will order from you again. Thanks for the free shipping and for providing an easy ordering process!
by: JimDogs04/16/2013
2000 GMC Jimmy
This receiver hitch is perfect for a 2000 GMC Jimmy! It was easy and quick to instal, only needed to remove 4 nuts and then install quickly by myself in the driveway. Instructions suggest that you need to enlarge 4 of the holes you will use, but the bolts slipped in without any modifications required. It wraps around the spare tire leaving plenty of room to access the spare easily. 35 minutes start to finish this install. Looks great as well!
by: Mike02/03/2018
Basic tools and a jackstand and I installed the hitch in 45 minutes. My 2004 required removing two of the factory bumper bracket bolts on each side which the included hardware replaced. I torqued the fasteners to the suggested spec and for my preference I put some blue Loctite on the fastener threads...........Sorry..no photos,bad weather was on its way and I did this outside in the driveway and I was focused on not getting wet!...........But...it looks good tucked up under the bumper and ready for towing!
by: Jack E.12/06/2011
2000 GMC Jimmy
Ordered the Hitch for my 2000 Jimmy and recieved it in 3 work days. Took me 40 minutes to install by myself, it would have less time if I had another set of hands Only problem I had was the powder coat on the hitch reduced the size of the holes but a quick easy drilling and I was ready to go. I'm very pleased with my purchase seems like a quality product at a very fair price.
by: David L.07/06/2012
1999 Chevrolet Blazer
I purchased this Curt Trailer Hitch for my 1999 Blazer. The e-trailer website is user friendly and I was able to easily find exactly what I wanted. I received the shipment quicker than expected. The hitch was easily installed with the directions provided. I am extremely happy with the product and saved money in the process. Would highly recommend the website and the product.
by: Rich P11/10/2014
2001 Chevrolet Blazer
Could'nt install myself. Otherwise its a great buy although the safety chains are hard to put on the hitch with the receiver lock I use.
by: Steve G10/16/2014
2001 GMC Jimmy
This is the third hitch I've bought from etrailer in the last 5 years, and as before, the service, shipping, and the product have been excellent.
Thank you!
by: Chad B.02/09/2012
Chevrolet Blazer
I bought this hitch because I needed it so I can tow my 5x8 trailer.. I got it pretty quick, and had it installed on my blazer in about 35 minutes... i didn't have to make it fit, it went right in... I would recommend this hitch to anyone !!!
by: Kenneth H05/31/2013
2004 Chevrolet Blazer
I had great communication with the company as they emailed me when the payment was received, when the order was processed and when it shipped. The shipping was fast and I was given a tracking number as well. I am not very mechanically inclined but found this to be super easy. Took about 45 minutes because the alignment and bolts can be a little tricky but that was the only snag. HIGHLY RECOMMENDED.
by: Musa05/04/2023
Easy install fits like a glove
by: Ole J.12/09/2014
1995 Chevrolet Blazer
The item C13300 installed on my 1995 S-10 Blazer in 45 minutes. All the holes lined up and all the bolts, spacers and nuts fit without any alterations. Hauled my boat the next day. Good product at a fair price.
by: Jeremy12/17/2018
2004 Chevrolet Blazer
This product is exactly as described and fits my 2004 Chevy Blazer ZR2. I had to run a 1/2 drill bit through the holes in the frame to clean them up a bit to get the new bolts to slide through easily. It fits well and looks good.
25
62
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Will Curt Trailer hitch # C13300 Fit a 2002 Chevy Blazer S-10 ZR2I spoke with my contact at Curt and he stated that the trailer hitch # C13300 will fit your 2002 Chevy Blazer S-10 ZR2 model. I have included a link to the installation instructions for you to view. If you plan on doing some towing, I recommend the etrailer ball mount kit # 989900 which comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring, use # 18252. I have included a link to a video that shows a typical installation of the wiring.
view full answer... - Trailer Hitch Recommendation for 2004 Chevy Blazer 2 Door 4x4For your 2004 Chevy Blazer 4x4 2-door we have the Curt hitch part # C13300 that you referenced as a confirmed fit. This is a great hitch that would work well on your Blazer. I attached an install video for you to check out as well.
view full answer... - Compatibility of Thule Apex TH9024XT with 2002 Chevy BlazerThe Thule Apex you mentioned, part # TH9024XT is compatible with with either a 1-1/4 or a 2 inch receiver and would work very well on your Blazer, unless you have a rear mounted spare tire. If this is the case, take a look at the help article I have linked you to. The article shows how to check for clearance by measuring the distance from the hitch pin hole rearward to the rearward edge of the spare tire. The article shows the clearance measurements needed for many of our available bike...
view full answer... - Will Curt Trailer Hitch Fit a 2000 Chevy Blazer with ZR2 PackageThe Curt Trailer Hitch Receiver # C13300 is compatible with your 2000 Chevy Blazer with the ZR2 package. I reached out to my contact at Curt who confirmed that the frame is still the same for the ZR2 so since the hitch is at the back it will fit. If you let me know what you plan on using the trailer hitch for I can make some recommendations if necessary. I've also attached an installation video of this on a 1996 Blazer that you can use as a reference.
view full answer... - Which Curt Class III Hitch Fits a 1999 GMC SonomaWe have a Curt Class III hitch available that will fit your 1999 GMC Sonoma but the part # C13300 is not a fit for it so I would instead recommend you the part # 13920 which is a confirmed fit that would work well. For trailer wiring you would then want the # C55359 which is also a confirmed fit. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
view full answer... - How to Pick Out Replacement Install Hardware for Curt Trailer HitchWe do have a way to order replacement hardware for the hitches we offer with the part number # RHK. With this part number you'd select the hitch manufacturer you have from the drop down menu and then enter your hitch part number into the parts box and we'd ship you out the correct hardware for your hitch.
view full answer... - Does Curt Hitch # C13300 Fit 2001 Chevy BlazerYes, the Curt hitch part # C13300 is a confirmed fit for your 2001 Chevy Blazer and would be a great choice.
view full answer... - Will the CURT Hitch # C13300 Install on a 1997 Blazer With a Spare TireI checked with CURT and this hitch will install with a spare tire mounted to your 1997 Chevy Blazer. If you plan on doing some towing you may be interested in the following products to complete your towing setup: Draw-Tite Wiring # 18252 (installation video attached) Ball Mount # D-4 Hitch Ball with 2 inch Diameter and Medium Shank # 19247 Hitch Ball with 1-7/8 inch Diameter and Medium Shank # 19260 Pin and Clip # PC3
view full answer... - Recommended Trailer Hitch for 2-Door 2000 Chevy BlazerFor your 2000 Chevy Blazer, I recommend the Curt Trailer Hitch Receiver # C13300. This Class III hitch is confirmed to fit your vehicle and will use existing holes in the Blazer's frame for a no-drill installation. This sturdy hitch has a towing weight capacity of 4,000 pounds and a tongue weight capacity of 400 pounds. I have attached the written installation details that you can use for reference. Since it sounds like you will be doing some towing, you will also need a trailer connector...
view full answer... - Trailer Hitch and Wiring Recommendation For 2002 Chevy Blazer 4 Door Yes, the Curt Trailer Hitch Receiver part # C13300 fits all models of the 2002 Chevy Blazer without drilling and a 400 lb tongue weight capacity so it is a nice choice. If you need wiring, I recommend Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C55411 that splices into the vehicle's wiring behind the Blazer's tail lights. If you plan on towing, I recommend etrailer.com ball mount kit part # 989900 that comes with 2- Ball mounts one with a 3/4" rise or 2" drop...
view full answer...
- Will the Curt Hitch part # C13300 fit a 2003 Chevy Blazer 4 Wheel DriveYes, the Curt hitch part # C13300 is a confirmed fit for all models of the 2003 Chevy Blazer so it would fit your 4 wheel drive 4 door model well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball...
view full answer... - Will CURT Trailer Hitch, # C13300 Fit a 2002 Chevy Blazer, 2-Door, 4x4 ModelYes, the CURT Trailer Hitch, # C13300, will fit your 2002 Chevy Blazer, 2-door, 4x4 model. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900, which comes with 2 ball mounts, 2 balls, a pin with clip, and a carrying bag. For trailer wiring use 4-Pole Hardwire Kit Including Circuit Tester, # 18252. I have included a link to a video showing a typical installation of this wiring harness.
view full answer... - Bike Rack Recommendation for a 2000 Chevrolet BlazerThere are several different bike rack options available for your 2000 Chevrolet Blazer. The first decision that you will want to make is which style of bike rack you prefer. You can choose from either trunk mount bike racks or spare tire mount bike racks, trailer hitch mount bike racks and roof mount bike racks. I have attached a help article that explains the different bike rack options for you to check out. Trunk mount and spare tire mount bike racks will be your more economical options....
view full answer... - 2002 Oldsmobile Bravada Hitch RecommendationYes, the Curt Hitch part # C13300 that you referenced has been confirmed as a fit for the 2002 Oldsmobile Bravada so it would work well for you. I attached an install video for this hitch that shows it being installed on a similar vehicle.
view full answer... - Trail Hitch and Towing Setup Recommendations for a 1996 GMC JimmyYes, this Curt Trailer Hitch # C13300 that you referenced would be the correct hitch for your 1996 GMC Jimmy. This hitch should not be too hard for you to install if you have basic mechanical skills and tools. It should only take you about a half an hour to complete the install. The recommended ball mount for this hitch is the Ball Mount 3/4 inch Rise or 2 inch Drop # AMSC2. For a ball for your trailer you will want to know what size ball the coupler on your trailer is designed for. Most...
view full answer... - Does the Curt Hitch # C13300 fit 2001 Chevy Blazer LT 4-Door 4 x 4The Curt Trailer Hitch Receiver # C13300 that you referenced is confirmed fit all model 2001 Chevy Blazers so it should work well on your LT, 4-door, 4WD Blazer. This will also clear your spare tire. I attached installation instructions for this product for you to check out also. To complete your towing setup you may be interested in the following products: Ball Mount # 2923 Draw-Tite Wiring for the Chevrolet Blazer # 18252 (installation video attached) 1-7/8 inch Hitch Ball # 19260 2...
view full answer... - Most Concealed Hitch for a 2005 Chevy Blazer All of our hitches include all the hardware and spacers you need to complete the installation. For your 2005 Chevy Blazer, the most hidden hitch is going to be the Curt item # C13300. This hitch is custom fit and bolts to your Chevy with included hardware. This hitch tucks up a little higher than the item # 75079 you were looking at. I have linked an installation video below to help you get this hitch set up. If you are planning on towing you will also need a wiring harness item # C55411...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Andrew K
Written by:
Lindsey S
Video Edited:
Mike H
Video Edited:
Sue W
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ray
10/9/2022
Good all is well