Buyers Products 2" Pintle Hook Mount slides into a 2" receiver to provide a mounting plate for a variety of pintle hooks and combination hitches. The pintle hook mount features 7 pairs of mounting holes for a 6 position mount. The strong, durable construction features continuous welds and a black powder coated finish for corrosion resistance.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a pintle hook mount. Now, this pintle hook mount slides into a 2" x 2" trailer hitch receiver, secures in place with a pin and clip or a hitch lock. Those items are not included. They're sold separately and available at etrailer.com. The pinholes on this mount will accept a standard 5/8" diameter pin. But this unit allows you to mount a variety of pintle hooks and combination locks.
Now, the pintle hook mount features 7 pairs of mounting holes, offering a 6-position mount. So, one, two, three, four, five, and six positions. It's a strong, durable carbon steel construction with a solid shank design. Has continuous welds as well as a black powder coated finish to protect the unit from rust and corrosion. Now, the overall length from very front to the very back of the shank is about 12 1/4".
Our holes up and down are spaced apart from one another on center by 1 3/4", and then side to side they're separated on center by 3 3/8". The plate has a width measurement of 5" and a height measurement of 12 1/2". It can be used in either the drop or rise positions, and the maximum gross trailer weight capacity for the unit is 10,000 lbs. Maximum tongue weight capacity is 2,000. That's going to do it for today's look at the pintle hook mount..
Average Customer Rating: 4.8 out of 5 stars (108 Customer Reviews)
First of all this thing is stout and they shipped it early. Very good experience.
Functions as expected
Works great made very well
Heavy steel, good welds.
Just what I needed. Fast shipping.
I went out of my way to buy this one specifically because it was the only one I could find listed as American made.
Well it showed up made in China.
The quality is decent and it will do the job but it hurts to know I can’t buy a American made pintle hook at all.
If I had known I would have put in time to shop used locally.
I drilled another 21/32" hole in my hitch, which brought it nearly 2" closer to the truck. I debated welding the original hole shut but decided not to due to the unknown heat factor. It hasn't folded up yet, and I'm sure there's been a few times when I was grossly overloaded, and significantly beyond tongue weight at least until things were situated properly. Never had a problem. Wish it would've been closer to the truck from the get go but if another hole would've weakened anything, I'd have bent it already.
This was my first time ordering with etrailer and I can’t believe how fast I received the products (2days!!) and with free shipping as well . The products are top quality and as described online . The only thing I would add is that I ordered a trailer pintle hitch and a drop mount , and neither one had the bolts to mount the two together nor did I see it offered for sale as a “kit” to be purchased . That would be a nice compliment to add to the package .
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
Very well made with substantial weight capacity. Good finish. Bolt pattern fit my pintle hitch perfectly. I’ve ordered many times now from etrailer and the shipping is always fast.
Perfect for tow straps and recoverys for fellow offroaders or jus yanking someone out of the mud.
Works perfect
Did what I needed.
2 1/2" receiver Pintle hitch works great. Very heavy duty. I pull 30 foot trailer with a 16,000 pound backhoe on it and it works great.
Works excellant as a mount for my pintle. I bought it to run upside down to level my trailer.
This Curt Pintle Hook, along with the Buyers Products 3 position hook mount, works just fine. Good heavy duty hitch!
I really like how the hook mount is one solid piece. I ordered the pintle hitch recommended to go with this mount, the only downside is the bolts are larger than the mounts' predrilled holes. Not a big issue for me as I have the tools and bits to enlarge the holes but for someone who doesnt they would have to take it to someone to be done. Other than that great products!
sturdy product, good price, very fast shipping, durable packaging-thank you
The hole drilled for the pin should be further ahead so more of the I beam part of the hitch is able to slide into the receiver. This would make it a lot stronger and would allow for the pintle eye to be closer to the truck which in turn would make the trailer handle better and would be less stress on the product with more support overall.
Works really well. Bolted to the pintle hitch perfectly and the finish has stayed on.
Solid, well-built, and provides a great fit for 2 1/2” hitch. Definitely provides peace of mind with the loads I’m pulling knowing the capability of this hitch. Highly recommended!
Do you have a question about this Pintle Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.