Summer Starts Here - Save up to 70%
Replaces 1 double-acting angle cylinder on your Sno-Way hydraulic snow plow. Angle cylinder helps angle your blade so you can easily clear the roads. Rod extends up to 25-1/8" so you can push snow easily off to the side.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the Replacement 2 1/4" by 9" Double Acting Angle Cylinder for the Sno-Way Snow Plows. Now this part will replace the lift and angle cylinder on the Sno-Way Snow Plow. It does replace the Sno-Way part number 96101977. Bore size on this is 2 1/4". Now on the rod itself the diameter on the rod is right at 1 1/2". The length on that rod is 9" long, so it does give you a 9" stroke with a double acting lift cylinder.
The base diameter on this it's also right at 1 1/2".Now the pin size, the hole here and the hole here that the pins will go through, the diameter of that opening is 5/8". Now the center to center dimensions when it's retracted like it is in this position, which is measured from the center of this pinhole to the center of this pinhole is 16 1/8". When it's extended out it's 25 1/8". The port it's a dual port because it's a double acting cylinder. It's a number 6SAE size, and the location on the ports are inline.
But that should do it for the review on the Replacement 2 1/4" by 9" Double Acting Angle Cylinder for Sno-Way Snow Plows.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.