Replacement Angle Cylinder for Sno-Way Hydraulic Snow Plow - 11-1/4" Stroke - Single Acting

Video Transcript for SAM Snow Plow Parts - Snow Plow Replacement Parts - 3371303557 Review

Speaker 1: Today we're going to take a look at the Replacement 1-1/2" x 11-1/4" Single Acting Angle Cylinder for the Sno-Way Snowplows. Now, this part will replace the lift and angle cylinder on a Sno-Way snowplow. Replaces the Sno-Way part number 96107455. The bore size on this is 1 1/2". The rod itself, the diameter, if we put a ruler on that, it's going to be right at 1 1/4". The length on that rod is 11 1/4" so it gives you an 11 1/4" stroke with a single acting lift cylinder.

The base, the diameter on the base is right at 1 1/2".The pin size, which are these holes right here that the pins would go through, diameter of those holes are 1/2". The center-to-center dimensions when it's retracted like it is in this position, center of this pinhole to the center of this one is 16 3/4", and when this is extended out would be 28". The port type on this is a #6 SAE and the location of the port is 90 degrees. But that should do it for the review on the Replacement 1 1/2" x 11 1/4" Single Acting Angle Cylinder for the Sno-Way Snowplows.