Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
(970 reviews)
Price: $485.00
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
Our Price: $485.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Need help with installation?
Locate installers near me- All Info
- Reviews (970)
- Q & A (0)
- Photos
Roadmaster Base Plates
- Removable Drawbars
- Roadmaster
- Hitch Pin Attachment
The crossbar-style hidden brackets attach to your vehicle's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing.
Features:
- Hidden bracket design - drawbars are easily removable via 2 pins
- Improved aesthetics compared with standard brackets
- Computer-cut, all-steel construction provides exceptional strength
- Black powder coat finish is durable and corrosion resistant
- Simple installation - no welding required
- Custom base plates ensure a perfect fit for your vehicle
- Compatible with Roadmaster tow bars with use of quick-disconnect crossbar (910021-00 - sold separately)
- Instructions and mounting hardware included
- Made in the USA
- Limited Lifetime Warranty
The square drawbars, or front arms, on the crossbar-style base plate kit are simple to mount and remove, easily securing with hitch pins. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs as well.
284-1 Road Master XL Base Plate Kit
Item # 284-1
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2010 Dodge Grand Caravan
- 2008 - 2016 Chrysler Town and Country
Customer Reviews
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms - 284-1
Average Customer Rating: 4.8 out of 5 stars (970 Customer Reviews)
The crossbar-style hidden brackets attach to your vehicle's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing.by: Steve02/11/2023
etrailer service is and has always been stellar. My order was correct and was delivered very quickly. The only reason I made this a four instead of a five was that the rear bolt position of both base plate brackets where welded on crooked. Each small plate was at a different angle from each other. In my opinion whoever welded them wasn’t paying attention to quality control. Because I was on a time crunch for my departure on a trip and could not wait for replacements (and I needed the vehicle for local driving) I made the brackets work. Other than that the installation went smoothly and I was able to test tow my 2004 CRV a couple of times without incident.
by: Jr02/13/2024
Very impressed that they're the exact fabbed fit, and easy to install! These tow base plates are super sturdy!
by: Ernie12/25/2021
Item arrived earlier than predicted after viewing a very complete tracking system. The information was very clear and precise. Good job! I am 75 years of age and installed the baseplate myself. Only a couple of minor issues. One pin would not insert. Welding blob in the way. Filed it smooth and problem solved. The video was excellent but was a bit different in that it showed a different method o rear bolt installation, however the instructions on paper showed the correct way. Reinstalling the front clip had presented some difficulty. I suggest really watching the inner fender position relative to the front clip before removal. All said all went well. The finished look is great, (see pictures). Great product!
by: Barri11/24/2021
Base plate 1910 install on 1999 Landrover disco 2
the base plate arrived fast (as does everything I have ordered from etrailer). It was a bit bent on arrival but Becky sorted me out and offered to replace it but it was easy to bend back (with a 3lb hammer).
The included instructions were great for removing the bumper but nor much else. Possibly because my Landy is a 1999 disco 2 and the pictures were of a 2002.
I have included some pictures of stuff I wish I had known. Firstly I had to loose the recovery loop on the driver side as the base plate would not fit over it. The chassis frame has steel tubes inside the bolt holes so the amount of drilling is minimal (I ordered a drill bit that they suggested but in all honesty could have opened up the holes with a file easily).
You need to oval out the aluminum crush cans before you replce them or the new bolts will not go through. The center mount bolt just needs the plastic mount for the center screw on the scoop cut out and there is a bog square hole on the top of the member (thats why you need to big square piece of steel on the top of the center bolt)
Mine was obscured by the torsion bar so I ended up dropping it to drill out the hole and get the bolt in straight.
It was easy to bolt up to the frame once everything was prepped and do yourself a favour and buy loctite red for the bolts - you don't want to be going in there again.
The bumper template was a good start but I had to reshape mine a lot particularly as the hole on the baseplate ended up halfway through the bumper and I had to do a lot of enlargement at the bottom to attach the safety wires.
The photos should make more sense of some of my description
by: Gary02/08/2024
The baseplate and crossbar arrived one day earlier than expected. Directions were included which made the installation pretty easy.
I am happy with etrailers products and will buy from them again.
by: J.C. Randall07/23/2018
This base plate was installed on a 2008 Kia Spectra. The bracket is strong and not really hard to work with HOWEVER,,,,,,,,,, I am used to the BlueOx base plate which is much easier to "hook up". Unfortunately, BlueOx did not make a base plate to fit my vehicle. That is not a big problem as I'm usually not in any hurry and it only takes maybe 5 minutes longer to "hook up".
The biggest problem with the RoadMaster base plate is that due to the way it is bolted to the frame, it only allows for a 6-inch ground clearance on the front of the vehicle. I have to be very careful with any "dips" in the road, especially on cross streets. Six inches may not sound like much but since the tires are several feet behind the base plate, it reduces that ground clearance greatly. It also will not clear the concrete "stop blocks" in front of many parking spaces.
If you are not very careful and keep this in mind, you may likely bend the frame of your car when you come to one of these sudden impacts. I haven't bent anything yet but it has certainly been shocking when it hits. Most of the time, the impact will cause the base plate to scrape and lift the car to the height to clear the obstacle.
I've attached a picture with a ruler in the view.
by: Denise 01/06/2023
Everything looks good for us, but we have one more part that we are waiting on before we can install on the truck plus it's raining out here in Washington State. when it's time to put it all together we will take a picture and send it.
by: Lisa 10/22/2023
My husband and I were able to install the Roadmaster base plates on our 92 Jeep Cherokee in just a couple of hours. It went on pretty much the same as the demonstration video on the etrailer web site. The minor differences were addressed in the printed instructions that were included in our package. We haven't put it to the test yet as we still need to tackle wiring for the Roadmaster Even brake system that we purchased second hand. We will be towing our Jeep with our 93 Safari Trek. Customer service provided by Marty was excellent. I will provide pictures at a later date.
by: Gordon01/04/2015
Good information and prompt shipping.
Base plate is solid and install and use instructions are excellent.
Be warned that product install is drill two holes and install 3 bolts, BUT the entire front panel has to be removed and replaced. Not difficult, but time-consuming.
Seat bracket is solid and install and use instructions are excellent.
Brakemaster kit is good quality, but instructions are not as good as most Roadmaster products. Instructions for air line install are especially weak.
by: Glen04/04/2023
The hardest part of the installation is getting the grill off and back on. Of the six preexisting holes all but one lined up the sixth hole was off about a half inch but the car had hit a deer a few years ago.
by: 11/02/2023
This was a very simple install. This is my 4th baseplate I have bought and 2 pintle tow bars. Always excellent craftsmanship
by: Rifleman04/11/2019
Installed on a 2010 Ford Ranger Sport 2wd
Have towed over 10000 and not one issue. I did the install without one issue, picture perfect, I did use a online video to get a general idea of install otherwise I primarily used manufacturer's. . Be sure to use the recommended/ required locktite product.
Enjoy!!!
by: Jeff10/08/2023
What a job to install this thing! Does not line up with any of the existing holes. It is close, but still a real bear to get into place. Instructions do not have any photos. The instructions also list bolts that are not in the kit. I strike that up to a misprint, but still very confusing. It requires a drill bit, that I could not find any any hardware store or auto store. 17/32 drill bit? Maybe include that with the parts? Definitely helps to have another hand and a lot of patience. No videos online about this install and what to do about all the gaps where it does not properly line up at the right angle for towing.
by: Michael08/04/2023
Dealing with eTrailer to purchase and install my own base plate made me feel like I had a team of experts at my disposal. The installation is not easy and not for everyone, but with the help of chat sessions and videos, I believe that most people with some good working knowledge of tools can get it done.
by: Richard05/26/2019
Base plate kit was fairly easy to install,all hardware was included and directions were clear! I would definitely buy another to install if ever needed. I do have a car lift making it easier,but would not be bad without,just a little harder on the knees!
by: Stephen12/05/2019
Great product, shipping was FAST. Instructions were adequate, but minimum - this was not surprising, you have to know how to bend wrenches to install something like this yourself.
I had a factory-installed tow hook on each side that had to be uninstalled, but once you remove the front bumper shroud it is easy to remove and all the bolts are easy to remove. Once the hook was out of the way, easy-peasy!
by: Rickey09/26/2023
Fast shipping and installation went smoothly with the provided instructions. The only complaint was the shipping box was in very bad shape - I think due to the weight of the base plate. A sturdier shipping box should be used.
by: Myles D01/26/2019
Great product,installation took about 3 hours,instructions were good,go step by step.works well with the roadmaster falcon tow bar.
by: Brad10/28/2021
Super nice people at etrailer. I wasn’t sure exactly what I needed and they helped me pick out the best hitch for me.
by: Bob H.12/08/2015
I needed to set up our 1998 Toyota RAV4 for dinghy towing. Etrailer.com had everything I needed. The Roadmaster 1142-3 base plates fit as designed and were fairly easy to install, the only body modification needed was trimming the splash pans around the engine for the ends of the mounts. I had to point them out to my wife after installation, they are very discreet when not in use. The Roadmaster 910021-00 QD towbar assembly will make connecting to our RV a breeze, and the RM-98100 second vehicle kit had all the connectors and tubing to install my Brakemaster and BrakeAway cylinders. The long leads on the HM20014 breakaway switch meant I needed fewer wire connectors, and the FA80-01-2160 coiled cable will provide a more finished look when not towing the Toy. I decided to not complicate my life any more than necessary, and selected the EZT20B tow light kit instead of a magnetic kit due to the convertible top on our RAV4. The customer service people at etrailer.com were quick to answer my questions about wiring options, kept me informed when I had a delay, and the shipping/delivery times were unbelievable. Here in Wisconsin I received my orders in TWO DAYS!
by: Stan F02/12/2015
Placed order with Rebecca after she answered several questions. Shipment was quick and follow on emails kept me informed of status of order. In fact, she called me to let me know that the order had shipped. Product was drop shipped to Labelle Auto for installation. As stated in product manufactures installation instructions the install was straight forward and took the full 3 hours. I have used (towed) my vehicle since the install and everything works great. Also installed the Roadmaster Diode wiring kit. Easy to do and works great. As an added benefit with this kit your front running lights will also be illuminated. Overall I am very satisfied with both the product and the customer service provided by Rebecca and Dana at etrailer.com.
by: Barney04/06/2024
I've towed with it many times and Zero problems. I did find that moving the car slightly forward after stopping helps relax tension amd.make.disconnect much easier. Overall... I'd say SUPER..!!
by: Paul 08/31/2023
These brackets are very well made and once installed, are perfect. The reason a four star rating is because the drilled holes in the bracket did not align properly on the driver's side. I had to get a sturdy metal bit and redrill the hole. Once I did that, the installation was complete. FYI, I bought the tow bar with this product and it is perfect.
by: MEC02/22/2021
Very rugged kit with excellent instructions. A DIYer with medium mechanical skills can install. Involved removing the front bumper which was not difficult. Value for the price is very good. As always, etrailer support was also very good.
by: Chris B03/25/2015
First off it wasn't a "5 minute job". Took me probably 3.5 hours or so on my back in the garage, but I took my time especially with the cutting/trimming of the lower valance on the front bumper. I did not want to cut too much & have big gaping holes in the bumper. All in all it went well. To cut & trim the bumper I simply used a bare hack saw blade, Dremel tool, file & razor knife
The picture in the instructions of where to cut a hole at the back of the fog light recess is a little puzzling until you get the light out & locate the tie-down bracket bolt that needs to be removed. You'll need to make the hole larger because the replacement bolt has a 17mm head on it instead of the stock 14mm hex head.
Wasn't real happy about how much they had me hack off the panel under the engine. Probably should have looked that on my own rather than use their crudely drawn lines in the picture.
I was able to drill the 1/2" hole for the 5 1/2" long rear bolt with a regular length drill bit. Just drill as straight as you can using the little square hole in the frame rail as your guide. It seemed to take forever to get to the required torque of 56 '/lbs on the long bolts. I suspect that's because the frame rail actually crushes a little bit.
I want to point out 1 drawback to the brackets that I noticed. If you're using a tow bar that has a cross plate between the 2 bracket bar inserts (like I am), you can not pull the removable inserts out with the cross bracket attached. They're NOT parallel to one another, so when you're home & no longer in "tow mode" you'll have to unbolt one side in order to remove the bars.
Otherwise a well made product. Haven't actually towed the car yet though.
25
970
Show More Reviews
See what our Experts say about this Roadmaster Base Plates
- How To Get Replacement Arms For The Roadmaster Crossbar-Style Base Plate Kit # 284-1To get replacement removable arms for your Roadmaster Crossbar-Style Base Plate Kit # 284-1 you'll just need to fill out the form I've linked below for # RM-ARMS listed as "Installation Details" and send it into Roadmaster to get the correct replacements.
view full answer... - Can the 2009 Dodge Grand Caravan be Towed with the Roadmaster Tow Dolly # RM-2000-1Yes, it is required that the steering wheel is locked when towing with the RoadMaster Tow Dolly with Electric Brakes, item # RM-2050-1. The instructions state that the steering wheel must be locked or otherwise secured when towing. Failure to lock the steering wheel will allow the towed vehicle to pivot on the bed, causing it to hit the fender and wheel assemblies of the dolly. Severe damage will occur if the steering wheel is not locked. If your vehicle owners manual says not to tow the...
view full answer... - Recommended Base Plate And Tow Bar For 2010 Chrysler Town And CountryThe base plate, part # 284-1 and the Tow Ready Tow Bar, part # 63180 will work with the help of an adapter bar, part # RM-025 on your 2010 Town and Country. To make it much easier to connect and disconnect I recommend part # RM-201. When using this system you are limited to 45 mph. I do have another option I think will work better for you. I recommend a tow bar like the RoadMaster Tracker Tow Bar, part # RM-020. This has a similar setup as the # 63180, but it has the crossbar included....
view full answer... - Recommended Components Needed For Flat-Towing 2008 Dodge Grand CaravanThe Roadmaster Falcon, part # RM-520 would work great with your 2008 Grand Caravan being flat-towed. There are 5 items you need when you want to flat-tow a vehicle. You need base plates on the towed vehicle, a tow bar, safety cables, lighting for the towed vehicle, and most states now require a supplemental brake system. I will make the recommendations for the items you need. First, I recommend the Roadmaster XL Base Plate kit, part # 284-1. These have removable arms when you aren't towing...
view full answer... - Can Roadmaster Blackhawk 2 Be Used to Flat Tow 2012 Chrysler Town and CountryYes, the Roadmaster BlackHawk 2 part # RM-422 can be used to flat tow your 2012 Chrysler Town and Country. You'll need the correct base plate kit for your vehicle though. For that you'd want the part # 284-1 which will fit and work well. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight...
view full answer... - What Does the RoadmMaster 284-1 Base Plate Kit for a 2008-2009 Dodge Grand Caravan IncludeThe Roadmaster XL Base Plate Kit, item # 284-1, for the 2008 and 2009 Chrysler Town and Country and the 2008 and 2009 Dodge Grand Caravan comes complete with all installation hardware and the front arms that hook up to a tow bar for towing the vehicle. Along with the base plate kit you may also need the following parts to complete your towing setup. Tow Bar # RM-501 or # RM-520 Safety Cables # RM-645 or # RM-643 Tow Bar Wiring # 38955 or...
view full answer...
Do you have a question about this Base Plate?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jeffrey L
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.