MB Sturgis Type 1 Propane Tank Connector - 200,000 BTU

See what our Experts say about this MB Sturgis Propane Fittings

• What is BTU Rating of 204024-MBS MB Sturgis Propane Cylinder Connector
  I checked with MB Sturgis and the current BTU rating of the # 204024-MBS MB Sturgis Propane Cylinder Connector that you referenced is 200k. It looks like it was uprated from previously being listed as 100k.
  view full answer...
• Can You Replace A Black Type-1 Propane Fitting With A Green One
  The color of the fittings were to signify the BTU range for the fittings, but with some manufacturers stepping out of those ranges the color really isn't as important and knowing what the BTU rating of your regulator is. Since the Type-1 Fitting would be before the regulator the flow is going to be limited to the capacity of the regulator. If you had a regulator like part # 37207-30335, which has a 175,000 BTU rating and used a fitting like # 204024-MBS, which has a 200,000 BTU rating you'd...
  view full answer...
• Connecting A Type 1 Low Pressure Propane Cylinder Connector To A Hose
  the general rule of thumb with NPT fittings is that the outer diameter is 1/4" larger than the measurement of the fitting. So a 1/4" MNPT fitting like on the MB Sturgis Black Type 1 Low Pressure Propane Cylinder Connector Item # 204024-MBS would have a 1/4" FNPT fitting connect to it but you would need a 1/2" wrench to tighten it. I recommend also using some Thread Sealant Tape for Gas Lines Item # 37207-30025 to ensure no leakages occur.
  view full answer...
• Recommended Pressure Gauge & Shut Off for 100 lb Tank
  The Camco Propane Cylinder Gas Gauge and Leak Detector # CAM59023 as well as the MB Sturgis Black Type 1 Low Pressure Propane Cylinder Connector # 204024-MBS and MB Sturgis Quick Disconnect Propane Connector - 1/4" FPT # 104052-MBS would give you the combination you are looking for. You can find the exact costs on the product page and include shipping cost in the shopping cart.
  view full answer...
• Connecting 20 lb Propane Tank to Stove
  It depends on the connections you have to make, there isn't a universal tank to stove connection. For example, the Propane Pigtail - Type 1 x 1/4" MPT # 100473-20-MBS is a 20" long hose with a Type 1 Acme nut for an Acme or P.O.L. connection on your propane tank and a 1/4" Male NPT connection at the other end which normally connects to a regulator such as # 108072, though if that's what your stove uses it can connect to that as well. I have added a link to our selection of propane hoses...
  view full answer...
• Availability of Type 1 Cylinder Connector For Use with Camco Low Pressure Regulator CAM59013
  It sounds like you're looking for a Type 1 ACME x 1/4" male NPT connector, like the one that is included with # CAM59863. If all you need is the black, low pressure propane cylinder connector, you can use # 204024-MBS. This will connect between the regulator # CAM59013 and cylinder, just like you wanted.
  view full answer...
  
• Comparing Colors of ACME Type 1 Propane Connectors for Function
  There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour. The dark green are rated for 450,000-500,000 Btu per hour. The Red connector is the strongest spring and is often used for high pressure adapters and T-fittings. Here are some options of each: Dark Green # 204052-MBS Black # 204024-MBS Light...
  view full answer...
• Low Pressure Propane Cylinder Connector for CAM59013 Regulator
  Because you're using a refrigerator that uses low pressure propane, the black MB Sturgis # 204024-MBS will work for this application perfectly. You'll want to use either pipe tape or a sealant like the JR Products Gas Pipe Sealant # 37207-30555 to make sure that there is no gas leakage between the connector and your Camco # CAM59013 regulator.
  view full answer...
• Will MB Sturgis Black Type 1 Low Pressure Propane Cylinder Connector work with Propane Torch
  Your RV will operate on low pressure propane which is what the part # 204024-MBS is designed for. Whether or not that will work with your propane torch depends on what it's designed to work with. If it's low pressure and uses the Black Type 1 ACME fittings it would work.
  view full answer...
• Difference Between The Colors of ACME Type 1 Propane Connectors
  There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour. The dark green are rated for 450,000-500,000 Btu per hour. The Red connector is the strongest spring and is often used for high pressure adapters and T-fittings. Here are some options of each: Dark Green # 204052-MBS Black # 204024-MBS Light...
  view full answer...

Do you have a question about this Propane Fitting?