To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (28 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.First of all i want to tell you that the Dodge dealer asked me 775.00$ + taxes for a hitch and wires for my trailer. They told me that they
had to remove the bumper to install the hitch.(2 hrs labor at 85.00$/hr).They also ask me 199.00$ + 1.5hr labor. for the wires.
I decided to do the job myself. So i found on the web a hitch sold by a particuler saler for 100.00$ + 20.00$ hardware.It took’s me about
tree hrs alone to install the hitch. I start searching on the web for a trailer site and i found your company. When i saw that video
showing how we can intall a hitch whitout remove the bumper i was so happy that i went to the dealer and i show them whit a print of
instruction how we can do the job.
At that time i saw all the accessories you had to sale and that’s why i bought wires from your commpany. Your name is in my browser
and i will talk to my friends about your site. Thank you for the services.
I send a photo of my self and few photos showing step by step my job.
This trailer hitch bolted up Easy to my 2009 Dodge Journey with the help of my 12 year old son. This project Only took and hour and a half, first time ever putting on a trailer hitch. I also bought the Wire harness to, it was a breeze, and took about an hour to wire. Over all this project was pretty simple, no special tools need, just follow the directions.
As easy to connect as advertised. I'd advise running that one connection from the drivers side to the passenger side before you install the hitch though. Lots of room to work with that way.
And I'm not sure why that heavy wire needs to be connected to the battery (you can't even see the battery in my '09!!) but it's a pain to run under the vehicle. I ended up taking of body panels inside and running it that way. I bit more work but I know it's protected that way and not going to melted on the muffler.
Pretty simple to hook up. It is much easier if you are removing the rear valance (plastic bumper) at the same time to install the tow hitch. The only difficult part is running the power wire to the battery. My Journey has a power outlet at the back, so I ended up splicing in there. I feel a little more comfortable with it being on a key switched outlet and don't intend to run the lighting without the motor running.
Yes,I received that T-one vehicle wiring harness, That`s already install and that was easy to install, I recommand that to everyone who need it. Thank`s
The hitch is working great. The installation was a little bit tricky, but i did do it myself on my back in my garage at home. Only thing the directions didn't tell me was to remove the tow ring that comes on the vehicle from the factory. Other than, that all went smooth.
Not my first rodeo with these people. Great service, and great products. Just got another hitch and electrical hookup for our 2016 jeep , so will install soon! RJ
Hitch fit well, instructions were clear, it took about 1 hour to install. The wiring kit was a bit more time-consuming but it also fit and worked well. Thanks!
Harness was easy to install and had instructions that were easy to follow with illustrations. I also got the tow hitch.. Saved me over $350 on the $525 that they wanted to install one at the shop.
My Trailer Hitch is awesome. It was also delivered at lightning speed.
Thank you etrailer!
Jeff Emrick
Very satisfied with the product installed easily and it leaves nothing to guess about all wires and plugs install with ease along with the mount
Nice price. Instructional video was spot on and installation went smoothly. Recommend wearing a some 9mm gloves as there is a lot of tucking into areas that like to "bite".
Definitely recommend.
Really easy to install I had the wire and hitch installed in an under a hour
the package came in timely and well packed. the online video was superb in explaining the installation. well done etrailer!!!!!!!
Shopping with etrailer is always a great experience. Recommended products and videos for selecting and installing products on my specific vehicle are always intuitive and spot on.
Easy to install and the on line videos were excelent.
Simple, easy to install.
Keith K.
9/13/2015
Mine appears to have also burned out after 3 years. Installed in 2012.
Harness looks great, but it is not the correct one for my vehicle. I am working with customer service to return this item, and ordering the correct one for my vehicle.
I have been extremely Pleased with the hole operation , Product ,shipping all been very good.
Thank you John P
Quick service with great product. It arrived a day early. Easy to install.
Very good service and exact product thanks for the video . That was very helpfull.
Easy install. Took just me and wife.
If you have the basic tools and can watch a video than this is a great product to install.
Very easy to install. Works great
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Todd
6/7/2015
..... And here I am again buying another one because the first power module shorted out for no obvious reason. Power going into module, no power going out of module. The wiring on the trailer works fine with another vehicle. I guess 3 years is the life expectancy.