T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
(468 reviews)
Price: $36.96
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
Retail:$53.60
Our Price: $36.96
You Save: 31%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (468)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Insert fuses and relays (included) in engine compartment
- Locate connection points beneath your vehicle, along the frame rail
- Plug in connectors
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 7.5 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's factory tow package wiring harness, which is located beneath the vehicle, near the frame rail on the passenger's side. Once you've plugged in the connectors, insert the included fuses and relays into their locations in the fusebox, which is located in the engine compartment.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118270 Tow Ready T-1 T-Connector - OE Replacement 4-Flat
Item # 118270
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2016 GMC Acadia
- 2013 - 2016 GMC Acadia
- 2017 - 2017 GMC Acadia Limited
- 2017 - 2017 GMC Acadia Limited
- 2013 - 2017 Buick Enclave
- 2013 - 2017 Buick Enclave without factory trailer connector
- 2013 - 2017 Chevrolet Traverse with factory Tow Package
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Product did not meet expectations
Customer Reviews
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector - 118270
Average Customer Rating: 4.9 out of 5 stars (468 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required.by: Kershaw Graham08/06/2017
2013 Buick Enclave
Gave this order 5 stars for the prompt service and the product was just as described. I ordered a drawtite Hitch and wiring connector for my 2013 Buick Enclave. The hitch and wiring connector arrived quickly. I also ordered a bracket for the four wire connector within 10 minutes of the first order, which was shipped first, it was shipped by the USPS. All of the items fit perfectly and was easy to install following the excellent instructions. Great job! Recommend etrailer for all your towing needs.
by: Anthony06/22/2019
Hi. The hitch and wiring fit like a glove. Looks
Like it came from the factory new. Love the
fact the draw tie hitch can hide away under the
bumper cover. Highly recommend this
Product. I will pass the word about your
company to all my contacts in the business.
Thanks for all your help Stephanie. Look
Forward to doing business with you again
by: Robert C.11/04/2017
2015 Chevrolet Traverse
Purchased hitch and wiring harness.
Great products. Easy to install.
Fast delivery.
by: Howard 02/10/2024
Very good product love the explanatory videos. The videos alone make the purchase worthwhile.
by: Christopher S06/07/2019
Easy installation. Everything fit perfect. Wiring harness was a little tricky but the manufactures plug was hard to get to. After installation I was able to put my access door back on.
by: Rey06/10/2020
Highly recommend this wiring kit. It was extremely easy to install, the directions were super easy to follow. Me and my son had it done in 10 minutes.
by: Paul White03/15/2021
Great product! Easy to follow instructions. Everything needed came in the kit. I also watched an [online] video from etrailer before installation which made the job sho much easier. Thank you.
by: Matthew02/25/2021
THANK YOU! I got a hitch receiver and wire. Adam was very helpful to make sure I got the right products I needed for my vehicle. Very easy installation!
by: Benny05/03/2022
2015 Buick Enclave
I ordered a hitch kit, along with the wiring harness for my 2015 Buick Enclave. They arrived in 3 days with free shipping. I watched the installation video on YouTube twice. I but my car rear wheels on a set of ramps and the installation was complete in about 45 minutes. It was super-easy and EXACTLY as the video had shown. Rarely does a company exceed expectations so completely. Ordering was easy. Shipping was fast. The quality of the hitch and wiring harness are great. The videos for both the hitch and the wiring harness installations were very well done and easy to follow. The hitch was a perfect fit on my vehicle, no adjustments, adapters, spacers, etc. Icing on the cake is that the factory trim plate covers the hitch when not in use, you can't even tell it's there. A big thank you, super impressive!
Katrina B.
7/25/2022
Id be happy to help you with this. This key is a direct replacement key for a SportRack bike rack, roof box, roof rack, and ski or snowboard racks. In order to find the correct key for your application, you will need to get the number off of the front of the locking core.
by: Mack 04/24/2023
Everything worked as planned. The harness is well constructed.
by: Oscar C.05/26/2017
2015 Buick Enclave
Easy install especially with the etrailer website video.
by: Woody L.11/20/2016
Saturn Relay
I'm 72 years old and I did not have any problem putting on the hitch. The wiring was more of a problem. My vehicle required removing the lower plastic part of the fender so I could attach your plug to the vehicle socket. Also the installation of the relays was not obvious. I eventually went to your video and looked for the mark on the top of the relay and used that to decide how to install them. This should be shown more carefully. Also not everyone is going to have lubricant for the connections, you should include a small tube of this or mention it on the order.
Woody L.
11/20/2017
fine... no more problems
by: Victor07/20/2019
I am very happy with this hitch and how easy it was to install. The price was right as well.
by: Jake H.06/15/2015
2014 Chevrolet Traverse
I bought a Hidden Hitch receiver and a wiring harness for my 2014 traverse. Both fit great and were installed in less than an hour. Shipping was fast and on time. Great prices and great service. Thanks for all you do.
Jake H.
6/14/2016
Wiring harness is still working great after a year. Its been completely trouble free. :
by: Michael05/14/2021
2017 Chevrolet Traverse
Love the product!! Easy to assemble, and easy following instructions.
by: Charlie02/21/2017
This was an extremely easy and fast installation. Simple as locating the factory wiring tow package plug in the rear wheel well on the passenger side, plug in the 118270 and then route and secure the wiring. Probably took all of 10 minutes.
Charles P.
2/21/2018
2016 Chevrolet Traverse. No problems at all.
by: Great Product & Instructions03/06/2017
2015 GMC Acadia
My delivery was fast and accurate. Installed the Trailer Hitch and Wiring following the included clear instruction. Everything went smoothly and I'm very happy I ordered from etrailer.com.
Great P.
3/7/2018
Product is great, no issues. Next year I will be looking for a setup to flat tow something behind a motor home and will come to etrailer first.
by: John M07/11/2016
2015 Chevrolet Traverse
Products are great, install was easy. Big brown truck dropped it off, and an hour later I had both the hitch and the light kit installed. Highly recommend etrailer!
John M.
7/11/2017
Still working perfectly
John M.
7/11/2017
Still works perfectly
by: Kou11/10/2020
Fit 2014 GMC Acadia SLE-1 that did not come with a factory tow package. Easy to install. Best price I found. Seems like quality materials and build. Highly recommend.
Kou
11/11/2021
Great product that will last! I still highly recommend this product
by: raym12/05/2020
very easy installation. hardest part was removing the rear bumper. and it was fairly easy( i worked as a body man for 43yrs.) seems to be of good quality. i havent had any issues yet. just plug in connecter and go.
Raymond M.
12/6/2021
perfect!!! use for my trailer and carrier for my wifes wheelchair. no problems!!
by: James R02/26/2017
2016 Chevrolet Traverse
It went on as easy as it looks in the video, which is surprising for most products you buy online. You can't go wrong with putting it on, as long as you follow the instructions and watch the videos they have on here.
by: Kelly 02/01/2022
2015 GMC Acadia
It has been a year since I installed the receiver and wiring harness on my 2015 GMC Acadia. I am very pleased. They have gotten used a lot. I do lawn care and use it to pull my trailer. I drove my trailer with my Harley Davidson on it all the way to Tennessee. I would recommend the little wiring harness support bracket that I purchased on every order. It is great and makes the 4 flat plug look tidy bu not dangling down or being tied up. No issues at all. Thank you E-Trailer for inquiring about it after it has been installed for a year.
by: Mike K05/31/2018
Buick Enclave
Installed on a 14' Buick Enclave. etrailer has fantastic instructions and support I knee what had to be done before hitch arrived. No surprises and was able to tow from TX to WI with no issues. Took about an hr to install by myself without lifting car. Also took pictures to document process.
I did have one minor issue when I arrived at the trailer rental place and running lights didn't work. A fuse blew after 1st trip with it. Replaced and haven't had issues since. Very minor and don't think reflects any negativity onto quality of product.
I also highly suggest purchasing plug clip mount with this hitch. If not the plug is dangling and it's not expensive to add the mount. Glad I did and it looks nice.
by: Briney5603/24/2017
2016 Buick Enclave
This kit could not have been simpler to install. Worked perfectly as well. Instructions are failsafe. My install was on a 2016 Buick Enclave. The rear connection port which came on the car from the factory was a little cramped, but otherwise not a problem. As is any under-car job, a lift or ramps make this job simpler.
Briney56
3/24/2018
Perfectly.
by: Mike F08/10/2017
2015 Buick Enclave
My Buick came without a hitch or electrical connections. After searching the internet for the parts I decided to go with etrailer because there were clear explanations on line for each item needed. The harness installed just as the directions indicated with no hassle. It has performed flawlessly over the past year. Same for the trailer hitch receiver. The install was done in less that an hour. The next time I need trailer hitch parts I'll use etrailer.com
25
468
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Where Does Tow Ready Trailer Wiring Harness 118270 Plug Into on a 2013 Buick EnclaveTrailer wiring harness # 118270 will plug into a single connector on your 2013 Buick Enclave. You will need to locate the vehicle’s connector located under the Enclave on the passenger's side. Look for an opening to the right of the muffler. Reach up into opening to locate the grey connector. Disconnect the mating protective cover and discard. Connect the Enclave connector to the mating harness. All connector surfaces should be clean and free of dirt. Be careful not to damage the locking...
view full answer...
- Number of Relays in Wiring Harness for 2017 Chevy Traverse Without Factory ConnectorYou will actually install just two relays with the 4-flat wiring harnesses that fit your 2017 Chevy Traverse without the factory trailer connector. The Curt simply has an extra, but both will have two relays installed, at the same position on your Traverse, R15 and R16, as you can see by the cut out of the linked installation instructions I added for each: - Tekonsha T-One Vehicle Wiring Harness # 118270 - Curt T-Connector Vehicle Wiring Harness # C56245 I have added links to video installs...
view full answer...
- Will Tow Ready T-One fit 2015 Chevrolet TraverseYes, the Tow Ready T-One Vehicle Wiring Harness will fit your 2015 Chevrolet Traverse. This wiring harness will plug directly into your vehicle's factory tow package. I have attached an installation video and of this wiring harness on a 2015 Buick Enclave, which will be similar to your Traverse. The installation instructions are also attached.
view full answer... - Correct T-One Vehicle Wiring Harness for a 2013 Chevy TraverseThe correct T-One Vehicle Wiring Harness for a 2013 Chevrolet Traverse is part # 118270 which offers plug-in-play installation. It provides the most basic trailer connector used for common trailer lights like stop, turn, and running.
view full answer... - Trailer Wiring Harness for a 2015 Chevy Traverse without Tow Package and with Rear Air ConditionerSince your 2015 Chevy Traverse does NOT have the tow package but Does have the rear AC unit I recommend wiring harness # 118270. It includes the necessary fuses and relays to activate the wiring tow package and will be easier to install that trying to adapt a different harness to fit.
view full answer... - Easy to Install Trailer Wiring Kit for 2015 Buick Enclave without Trailer WiringWe have a very easy to install trailer wiring kit for your 2015 Buick Enclave that comes with needed relays and fuses to easily activate the tow package wiring of the vehicle with the Tekonsha kit part # 118270 for a 4-way or part # 118271 for a 7-way. This easily plugs into a connector that's found at the rear of your vehicle.
view full answer... - Parts Needed to Install Curt Venturer Trailer Brake Controller in 2017 Chevrolet TraverseThank you for your brake controller purchase of the Curt Venturer # C74VV. For any trailer brake controller to send its signals to your trailer's electric drum brakes you need a fully-functioning 7-way connector like the one in kit # 118271. This particular kit is intended for vehicles with the OEM towing package but it is also possible to install a 7-way and brake controller on a vehicle without the factory tow package. If your Traverse did NOT have the factory 7-way the items needed...
view full answer... - Installation Of T-One Vehicle Wiring Harness For Factory Tow Package On 2015 Chevrolet TraverseYes, the T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector, # 118270, for your 2015 Chevrolet Traverse comes with 3-30 amp fuses and 3 relays. According to the instruction details that I've attached, you will only use 2-30 amp fuses and 2-relays. This will give you an extra fuse and relay to keep on hand for any issues.
view full answer... - Trailer Wiring Harness Recommendation for a 2013 Chevy Traverse without Tow PackageFor your 2013 Chevy Traverse without the tow package the correct trailer wiring harness would be the part # 118270. This will provide the turn signal functions for a trailer and will work with your rear AC unit. I attached an install video for you to check out as well.
view full answer... - Will Tow Ready 4-Pole Harness # 118270 Fit 2015 Chevrolet Traverse Without Factory Tow PackageTow Ready 4-pole wiring harness # 118270 is intended for the Chevrolet Traverse both with and without the factory tow package. The vehicle will have a plug that mates with the one shown in the linked photo. The kit includes the harness, and the fuses and relays to activate it. I have linked a video for you that shows you the installation process on your same model year Traverse.
view full answer...
- Wiring Harness for a 2014 GMC Acadia without a Factory Towing PackageThe Draw-Tite # 75528 that we currently offer for your 2014 GMC Acadia, and the one you referenced will utilize custom fit wiring # 118270 because a tow package is not present. The custom fit T-connector will plug directly into your Acadia's wiring harness located behind the driver's side and passenger side tail lights. I included a link with the instructions for you. Take a look at the articles I included for you.
view full answer... - Trailer Hitch and Wiring for a 2016 Chevy TraverseFor your 2016 Chevy Traverse I recommend Draw-Tite trailer hitch # 75528. This 2 inch hitch is rated for 750 pounds tongue weight and 5,000 pounds gross trailer weight (7,500 pounds when using weight distribution. I have linked a video showing an example installation for you. For a trailer wiring harness I recommend # 118270. It will fit models that do not have the factory tow package. It includes the necessary fuses and relays to activate it. I have linked a video showing an example installation...
view full answer... - Trailer Wiring Harness Recommendations for a 2016 Chevy Traverse 2LT AWDI will be happy to help you select a trailer wiring harness so you can get out there and get to camping! There are a couple of different ways you can add a trailer wiring harness to your 2016 Chevy Traverse: install a harness that plugs in line with the tail light wiring or use a harness that plugs into a factory location and that also provides the accessories to make it functional. The second way is the easier installation so I recommend we look at the best option in that category. If...
view full answer... - Recommended Towing Components for 2014 GMC AcadiaFor your 2014 GMC Acadia, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75528 is a confirmed fit. This is a no drill installation that requires the fascia door panel to be removed for access. This panel will not be able to be reinstalled over the hitch so the hitch receiver will be visible and yet look similar to a factory hitch. I've attached an installation video for you. The T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer...
view full answer... - Does It Matter Which Relay Goes Where With the T-One Vehicle Harness for a 2016 Chevy TraverseIn regards to the T-One Vehicle Wiring Harness part # 118270, the relays are the same so it does not matter which goes in the left or right stop/turn slot. I understand the numbers on them are different but both relays have the same functionality.
view full answer... - Where is the OEM Wiring Plug Located on a 2012 Buick EnclaveAccording to the installation instructions for your 2013 Buick Enclave, the vehicle’s towplug will be located on the rear passenger side of your vehicle.Locate the opening just to the right of the muffler. Up in the opening you will find the vehicle's tow plug. The wiring will have a grey plug at the end and this plug is where # 118270 4-flat harness will plug in to your Buick's wiring. I have liked a installation video that will show you exactly how to install the # 118270 wiring harness.
view full answer... - Is it Hard to Route Trailer Wiring Power Wire to the Battery on a 2016 Chevy Traverse LTZRouting of a trailer wiring harness power wire isn't all that difficult at all. It just takes time. I have included a link to a help article I wrote with tips on routing the power wire. But you won't have to route a power wire at all if you use trailer wiring harness # 118270 on your 2016 Chevy Traverse. It plugs into a factory connector already on the vehicle and includes the relays and fuses to make it active. I have linked a video showing an example installation for you.
view full answer... - Recommended Trailer Hitch Receiver for 2017 GMC Acadia LimitedTrailer Hitch Receivers are a custom fit for each vehicle, sometimes a certain series of a make/model are a different fit. This is the case with the with your 2017 GMC Acadia Limited. The frame on your specific vehicle requires a different mount style than that of the Draw-Tite # 76023 you referenced. The hitch receiver I recommend for your vehicle is the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2", # 75528. This is an easy bolt on installation. The complete hardware...
view full answer... - Finding Reverse Light Circuit When Adding 4 Pole to 5 Pole Trailer Wiring AdapterThe additional blue wire on the 4-Pole to 5-Pole Trailer Wiring Adapter # 47515 is to connect to the reverse taillight wiring feed on your vehicle. You can find the reverse feed toward the back of the vehicle, not on the 4-Pole Flat Trailer Connector Item # 118270. A 4-way connector doesn't use the reverse light circuit and that's why you need a 5-way for your trailer. To find the reverse taillight feed you will have to open the rear tailgate, you are going to get your power source from...
view full answer... - Will Tekonsha T-One Wiring Fit 2015 Buick Enclave Without the Tow PackageThe Tekonsha T-One # 118270 wiring kit is compatible with your 2015 Buick Enclave whether or not you have the tow package. If you did have the tow package you would simply connect the wiring but since you don't have the tow package you need to install the included fuses and relays as well. The wiring harness will still plug in like it does if you were to have the tow package. Attached is an installation video of this wiring harness on a 2015 Enclave that you can reference. If you can't...
view full answer...
- Parts Needed to Tow a Trailer with a 2013 GMC AcadiaTo add a trailer hitch to your 2013 GMC Acadia I recommend using the etrailer # e98863 which will give you a nice 2" hitch that's perfect for towing. You could use the Draw-Tite # 75528, but we've found that our powder coating is a bit thicker than the Draw-Tite, which helps protect the hitch from rust and chips in the paint; this means a longer lasting hitch over time. For the wiring you can go two directions depending on whether or not you will be towing a trailer with brakes. If you're...
view full answer... - Recommended Trailer Hitch Receiver And Towing System Components For 2014 Chevy Traverse LTZFor your 2014 Chevy Traverse LTZ, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75528 you mentioned. It is an easy to install trailer hitch receiver with the stylish round tube design and black powder coat over an e-coat base for great rust protection. For your trailer wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 118270. This custom-fit T-One connector plugs into...
view full answer... - Recommendation Between 4-Pole and 7-Way Trailer Connector for 2017 Chevy TraverseFor starters, the Draw-Tite # 75528 class III hitch is a confirmed fit for your 2017 Chevy Traverse. The hitch already has a stand-off welded onto it that a trailer connector mounting bracket like # 18144 for a 4 pole or # PK12711U for a 7-way would attach to. I'd agree with you leaning toward going with a 7-way like the # 118271. If you also get an adapter like # PK12716, you can also tow trailers that use the 4-pole connector, so you'll be set trailer connector-wise for the vast majority...
view full answer... - Trailer Wiring Recommendation for a 2014 Chevy TraverseFor trailer wiring for your 2014 Chevy Traverse you would want the Tow Ready Wiring Harness part # 118270. If you need a hitch you would want the Draw Tite hitch part # 75528. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Michael B
Written by:
Laura H
Installed by:
Cole B
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kershaw G.
8/6/2018
perfect fit working fine