Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - 1 to 4 Axles - Proportional
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In

Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - 1 to 4 Axles - Proportional
part number: C27JR

Bluetooth-enabled brake controller lets you monitor and control your towing directly from your phone. Create multiple trailer profiles and tweak your settings in the app. Main unit mounts out of sight under your dash.

Features:

• Activate your trailer brakes in proportion to your vehicle's braking
  • Automatically adjusts trailer's braking based on deceleration of tow vehicle
• Control and monitor your towing from your smartphone with the OneControl app
  • Adjust sensitivity and max power output
  • Press the manual override button in the app to control sway or stop in an emergency
  • Save multiple trailer profiles and driver settings - great for a fleet
• Troubleshoot with the diagnostic LED lights on the main unit
• Install main unit out of sight behind the dash in any position or angle
  • No more banging your knee on a bulky controller
  • No need to drill into the dash or ruin your vehicle's interior
  • Plug-in, vehicle-specific adapter (sold separately) can be used to reduce installation time on certain vehicles
  • Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems
  • Built-in reverse polarity and short circuit protection
• Includes main unit, mounting adhesive, zip ties, instructions, and quick reference guide
  • Bluetooth PIN for initial pairing to your smart device located in quick reference guide
• Pair with other OneControl systems for convenient control of your trailer in one app
  • True Course (C94VV - sold separately) prevents sway
  • Tire Linc (C54VV - sold separately) monitors your tire pressure and temperature

Specs:

• Application: trailers with up to 4 axles (8 brake assemblies)
  • Compatible with electric or electric-over-hydraulic trailer brakes
• Main unit dimensions: 3-3/8" long x 3" wide x 7/8" thick
• Smart device OS requirements:
  • Apple: 5.0 and newer
  • Android: 4.3 and newer
• Limited lifetime warranty

Note: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings. This brake controller is not compatible, but will not interfere, with Apple CarPlay or Android Auto.

The Curt Echo under-dash is all about simple use and easy install. With the main unit mounted out of sight beneath the dash, all you need is your smartphone to control the settings on the brake controller. You won't have to worry about banging your knee on a bulky controller, cluttering up your dash, or ruining the sleek look of your interior.

Control Your Towing with Your Smartphone and an App

The Echo is unique for giving you control of your towing through your smartphone. You can set the maximum braking output, adjust the braking sensitivity, apply the manual override - all from the OneControl app.

The Echo connects to the app via Bluetooth. You can save multiple trailer profiles in the app, a big plus if you have a fleet and want to be able to just select a pre-set configuration and get towing. And don't worry: after you've downloaded the app, you don't need to have data on to use the app with the brake controller. You'll be able to receive calls and texts and access your other apps.

User-Friendly OneControl App

Simple, intuitive, and user-friendly, the OneControl App makes it wicked easy to manage your settings and control your trailer.

1. Manual Override

This big orange button in the middle of the app is your manual override. Press and hold the button, and the brake controller will smoothly apply the trailer brakes without applying your vehicle's brakes. This is perfect for stopping sway or controlling your trailer's momentum in an emergency.

Quick tip; Put manual override right at your fingertips by adding this button (C83HR - sold separately) to your dash. The app must be running for the button to work, but it can be in the background while you use other apps on your phone. The button has an adhesive pad for a quick-stick installation and includes an easily replaceable battery.

2. Brake Output Indicator

The outer ring gives you a visual indicator of how much power is being applied to the trailer brakes. This is determined by your max output setting.

3. Max Output

Braking output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop.

To set your maximum braking output, tap this button and increase or decrease using the + and - buttons. You want to set the braking output as high as you can without locking up the brakes. Once you've set up the brake controller the first time, you shouldn't need to adjust the settings until the trailer load changes, you switch trailers, or road conditions change.

4. Sensitivity Level

This controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the max output level. This is a great adjustment to make when you're towing a heavy load and the trailer will need more umph to bring it to a stop so it doesn't push your vehicle forward.

Just like max output, if you need to change your sensitivity level, use the + and - buttons. If your vehicle takes too long to come to a stop, increase the setting. If it stops too abruptly, lower the setting. You may also need to adjust the sensitivity based on your own preferences, or when the trailer load or road conditions change.

5. Vehicle Hazard Lights

If you turn on your vehicle's hazard lights, there's a chance the trailer brakes will pulse on and off as the lights flash. Turn this setting on any time you activate your hazard lights to prevent this problem.

Save Multiple Trailer Profiles

Get on the road faster by saving your settings. With the app, you can add and store multiple profiles for both trailers and vehicles so that your preferred settings will be ready to go as soon as you hook up. This is perfect if you own a fleet and don't want to have to reset the controller every time you swap out trailers. You'll have the ideal settings saved and waiting for you. To switch between profiles, just swipe left or right.

OneControl: One-Stop App for Towing

If you like the idea of monitoring your trailer from your phone, the other OneControl systems could be a great fit for you.

The Curt True Course (C94VV - sold separately) is an advanced Bluetooth sway control system that automatically triggers the trailer brakes (independent of the vehicle's brakes and the brake controller) when it detects dangerous trailer movement. The Curt Tire Linc (C54VV - sold separately) Bluetooth TPMS monitors the temperature and pressure of your trailer tires. All of these systems use the OneControl app so you can manage all of them in the same place on your phone.

Simple, Out-of-the-Way Installation

You won't be dinging your knee on a bulky brake controller or interfering with your vehicle's lower airbags because the main unit mounts out of sight under your dash. This product comes with an adhesive pad and 4 zip ties to make it easy to mount anywhere. (Just don't zip-tie the box to wiring or cables that can shift as you drive!) Thanks to the 3-axis accelerometer, the main unit can be positioned at any angle. No matter how you install it, the unit will sense the direction of travel and deliver smooth, even braking.

The easiest way to install this brake controller is to get a custom, vehicle-specific adapter (sold separately) that plugs right into both your vehicle and the main unit - no hardwiring required. Otherwise you'll have to get a univeral harness and potentially splice into your wiring.

Note: If a custom brake control wiring adapter is not available for your vehicle, a 30-amp circuit breaker (sold separately) may be required for installation.

That done, download the OneControl app on your Apple or Android smartphone and wirelessly pair the unit to your phone via Bluetooth, following the in-app instructions. It should take about 5 seconds for them to pair. Once paired, the LED light on the unit will turn a solid blue. Plug in your trailer's 7-way and let the whole system calibrate for another 5 seconds. When the LED turns green, configure your desired trailer brake settings and save it as a profile. Then you're ready to tow!

Proportional Braking

The Curt Echo under-dash brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.

The Echo under-dash uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to ensure that your trailer slows at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.

Installation Accessories

See also etrailer.com's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.

51190 Curt Echo Wireless Trailer Brake Controller - Under Dash - Smart Phone Bluetooth Connection - One Control App for Brake Controller - 1 to 4 Axles - Proportional

California residents: click here

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate, which is known to the State of California to cause cancer, and Di-n-butyl phthalate, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
part number: C51332

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

Features:

• Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
• No cutting or splicing required
  • Custom connector end plugs into the built-in port beneath the dash of your vehicle
  • Other end plugs into the back of your electric brake controller
• Compatible with time-delayed and proportional brake controllers from Curt
  • Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
• 2' Long, 12-gauge wires have protective covering to deter damage
• Limited 1-year warranty

Installation of Curt Brake Controller Adapter

To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.

This adapter plugs into the port on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, and it is taped to another harness near the emergency brake pedal.

No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.

51332 Curt Quick Plug Brake Control Adaptor Harness

California residents: click here

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Customer Satisfaction Score:

93% were satisfied with this product

7% of customers were not satisfied

• Wrong item was ordered
• Product did not meet expectations
• Too difficult to install

Learn More

Customer Reviews

Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - 1 to 4 Axles - Proportional - C27JR

Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - C51332

Average Customer Rating:  4.5 out of 5 stars   (1550 Customer Reviews)

Order: RelevanceNewestRating - High to LowRating - Low to High Bluetooth-enabled brake controller lets you monitor and control your towing directly from your phone. Create multiple trailer profiles and tweak your settings in the app. Main unit mounts out of sight under your dash. Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

by: Alan03/12/2024

Do not buy either the Curt Under-Dash or plug-in Wireless brake controllers until Lippert fixes the phone app. I’ve used both happily with the old ECHO Smart Control app. I could use the remote manual button with the phone app not even running. As one would reasonably expect the button talked to the controller directly via Bluetooth. The new OneControl Auto app must be running and in the foreground to use the manual remote! And the most recent version of ECHO Smart Control is non-functional, it just tells you to install OneControl Auto.1746502

by: David04/17/2024

The Curt Echo is now on my Nissan Armada and works perfectly. It was an easy hookup with the supplied harness and does its job.1768476

by: Thomas08/09/2023

It does not fit my vehicle. On the attached photo the connector on the left is the stock dodge plug, the plug on the right is what I just got1642382

Click to Enlarge

Brooke M.

8/23/2023

Hmm...youll be looking for another white plug like the white harness. Do you know if your truck for sure has the factory tow package?

by: James 12/19/2023

This was relatively easy to install under the dash of our 2021 Jeep Grand Cherokee, especially since ours has the factory Trailer Tow Package and therefore an existing pigtail connector ready to connect to the brake controller. The Curt wiring adapter made it super easy to connect the Brake Controller to the vehicle's wiring harness. The controller was easy to calibrate and worked seamlessly while we're towing a rented trailer. We used a dedicated (older) cell phone to operate it while we're towing to avoid any potential interference from other apps rather than using our regular phone on which we receive phone calls texts, etc. This was our first time towing a trailer and this easy-to-use Brake Controller helped make us feel safe and comfortable. Highly recommended.1703957

by: Kory K03/18/2014

2008 Dodge Ram Pickup

Sorry for the late follow-up. I just wanted to let you know that the brake
controller and wiring harness I purchased through eTrailer worked very well
with my 2008 Dodge Ram 2500 with the Cummins 6.7L diesel. Pictures are
attached for your use, as required.

The trailer was an 18-foot enclosed snow machine tailer with a steel
chassis. I can't remember the empty weight, but it's substantial. We towed
empty and full on dry and snow covered roads from Oklahoma to Colorado and
back. Even with th exhaust brake on my truck, I can't imagine towing this
load through the hills and mountains without a brake controller. It's been
done before, but I would say it's an unnecessary risk given the more than
reasonable prices at eTrailer...it was cheap insurance pulling such a heavy
rig with my family on board.

The controller was definitely not your top-of-the-line model, but the
adjustability and controls were more than adequate for somebody who tows
occasionally. A professional may desire more proportional controls and
adjustability, but not much more. This unit peformed flawlessly.

Thank you for your time. Please feel free to contct me if you would like
any clarification on my statements or pictures.121175

Click to Enlarge

Click to Enlarge

by: Robert J. 07/15/2018

2007 Dodge Ram Pickup

This item easily plugged into my Curt brake controller and into my truck’s factory plug. Made for a less than 5 minute install; powering up the brake controller with no issues. Convenient is an understatement with this pigtail. Rig is 2007 Dodge Ram 2500 4X4 CTD. 542059

Click to Enlarge

by: Matthew 11/25/2023

The break controller worked seamlessly. Profiles are easy to set up and it has very reliable Bluetooth connectivity with my phone. Installation was really easy on my Honda Pilot!1695859

by: Steve T.06/18/2016

1999 Dodge Ram Pickup

Perfect fit for my 1999 Dodge Ram. it made installation of the brake controller super easy. I highly recommend paying the extra $** for this item.262433

Click to Enlarge

by: Michael 04/05/2023

Easiest install ever !
Plug and play. App is easy understand and use.
My favorite is with the app and on selected active profile you can see the amount of brake amount is being applied to the trailer when the vehicle brakes are applied. I also install the manual override button. FYI: you don’t need the app on your phone open for the controller or the manual override button to work. Also another nice feature of the manual override button is the size about the size of a quarter, uses a CR2032 battery and the battery level is displayed in the app.1550294

by: Tim 09/02/2022

The folks at etrailer are the best! Very helpful and knowledgeable!! The product I received fit perfectly and works great!!1389896

Tim

9/3/2023

Still working great!

by: Jim 02/09/2024

2004 Dodge Ram Pickup

y0u want good go to etrailer was a perfect fit1725163

by: Jesse 12/18/2023

Worked great. Helped me to trace down a wiring issue with my wiring on the truck and then worked perfectly and controlled some of the heavier loads and was easy to use.1703619

by: Andrew 02/05/2024

Very easy to install. Less than 15 minutes. On a 2023 GMC sierra 15001720643

by: Earl 08/21/2023

Needed a brake controller I could rely on because I was pulling my camper to a site at the top of a 25% grade within a few days. Unit plugged right into the harness for the factory brake controller (with the adapter cable) on my 2014 Ford F-150,and worked perfectly. Bluetooth connectivity works through the app (rather than through the phone's "settings" icon),and connects instantly. I'm very pleased with this product.1651642

by: Stephen02/08/2024

This unit has a constant draw on the battery and will kill the battery flat in about three days if the vehicle sits. Numerous other users had the same issue. Don’t buy. I will be contacting Curt about this issue.1724497

by: James 03/25/2024

sOnly have used it once so far and everything worked good1753722

by: David H07/31/2017

I ordered a fifth wheel brackets and hitch along with curt brake controller and pigtail. Everything fit great with no problems and the service and shipping was very speedy. Highly recommend etrailer for all your needs. 414208

Click to Enlarge

by: Robert 02/27/2024

Worked perfect for my 2021 Hyundai Pali sade1738908

by: Micah07/18/2022

Dodge Ram Pickup

2006 Dodge Ram. Easy install. Plug it in and tie up the wires. I put a wire protector sleeve to cover the wires coming out of the controller.1333098

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Paul08/29/2022

I was looking for a trailer brake controller that did not require a permanent mounting to the dash or center console of my 2020 Jeep Grand Cherokee Trailhawk. I initially considered the wireless bluetooth controller from Curt Echo that plugs directly into the 7-pin outlet next to the tow hitch. However, reviews from individuals that tow RV trailers identified that particular option prevents the 12v battery on the trailer from charging off of the TV while connected. This would limit the RV utilization during long trips involving boondocking.
The Curt Echo under-dash controller seems to solve that problem and uses the same user interface as the Curt Echo.
Easy to install and operate; problem solved!1383137

by: Scott09/18/2022

This brake controller has to be unplugged when not in use or it drains the battery in a few days. I had to have a electrical test done in my vehicle ($XXX). The etrailer tech said the test was done incorrectly. The Chevy dealer claims it was accurate. I’m left with a problem.1413743

by: Tony 01/19/2023

The brake controller video was very helpful. I made my choice, ordered it and received free of confusion. Thanks go to etrailer.1502498

by: Chris10/03/2022

Was not aware this device draws on the battery constantly. I don't daily drive my truck and have had to replace the battery twice in one month due to being drained below the point where they could be recharged. $[XX] later and this controller removed, I've not had any problems with the battery1435698

by: Chris 08/20/2022

I really wanted a trailer brake controller that I didn’t have to stick an ugly knob/box hanging off my dash. This was my solution and it works perfectly. Plugged right into my Honda Ridgeline existing plug, and easily connected to the app on my phone. Nice setup.1367318

by: John08/23/2022

This is the old obsolete model of Curt Echo which has to be installed under the dashboard. The newer version, which attaches to the electrical system in the rear of the vehicle, is superior and now preferred by most trailer owners. The above version should be taken off the catalog.1371829

25

1550

Show More Reviews

Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?

• Recommended Electric Trailer Brake Controller For A 2018 Mercedes-Benz GLC 300
  
• To tow a trailer with electric brakes with your 2018 Mercedes-Benz GLC 300 you'll need an electric brake controller. I recommend the Curt Echo Under-Dash Trailer Brake Controller # C27JR along with the Universal Wiring Adapter for Curt Trailer Brake Controllers # C51515, which will splice into your factory wiring allowing for a simple plug-in of the # C27JR. The Bluetooth function of this brake controller will allow you to use your smart phone or tablet to control and monitor your
  view full answer...


• Will the Curt Echo Under-Dash Trailer Brake Controller Fit a 2018 Jeep Cherokee
  
• The Curt Echo Under-Dash Trailer Brake Controller part # C27JR is an excellent option for a 2018 Jeep Cherokee and can be installed on models with the factory tow package using the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51459 which allows for a plug and play install. I have attached a review video I did below on this brake controller.
  view full answer...


• Redarc Brake Controller Install on 2020 Chevy Equinox
  
• A brake controller isn't a vehicle specific item. The Redarc brake controllers such as the Tow-Pro Liberty, # RED24FR will fit your 2020 Chevy Equinox. Vehicles equipped with the tow package will have blunt-ended tow package wiring located behind the side panel of the center console on the driver's side next to the gas pedal. You'll be looking for a bundle of 4 blunt ended wires that are blue, black, white/blue striped and white/green stripe. In addition to the # RED44FR Tow-Pro
  view full answer...


• Will the Curt Echo Under-Dash Trailer Brake Controller Draw Power with Vehicle Off
  
• The Curt Echo Under-Dash Trailer Brake Controller part # C27JR as with most any electric trailer brake controller will draw a very small amount of power even when the vehicle is off so it can save all your settings. That said, the power draw is milliamps so even for a vehicle that is not daily driven there will be no issues with a dead battery. If you want, you can unplug it each time to kill power but that means you lose all your saved settings for the trailer. This is the case for nearly
  view full answer...


• Install Harness for Curt Echo in 2018 Chevy Silverado 1500
  
• The correct install harness for installing the Curt Echo part # C27JR in your 2018 Chevy Silverado 1500 is the part # C51451. It would be pretty cool if the display would integrate into the dash of your truck! Hopefully that happens at some point.
  view full answer...


• Correct Wiring Harness to Install Curt Brake Controller on 2020 Chevy Equinox
  
• Equinox models equipped with the tow package will have blunt-ended tow package wiring located behind the side panel of the center console on the driver's side next to the gas pedal instead of a connector. You'll need the # C51515 universal harness that will plug into the Curt # C27JR Echo brake controller and wire directly to the tow package wiring. The tow package wiring is a bundle of 4 blunt ended wires that are blue, black, white/blue striped and red/green stripe. The pigtail
  view full answer...


• Curt Echo Under Dash Wireless Trailer Brake Controller For a 2017 Land Rover Discovery Sport
  
• With your 2017 Land Rover Discover Sport having the factory tow package wiring you will be able to connect the Curt Echo Under-Dash Wireless Brake Controller # C27JR using the Pigtail # C51322. The Manual Override Button # C83HR can be added if you do not want to keep your phone on with the app open to manually activate the trailer brakes when needed.
  view full answer...


• Parts Needed For Curt Echo Under-Dash Brake Controller in 2023 Kia Sorento With 4-Way
  
• I can definitely help you out with all the part numbers needed for your 2023 Kia Sorento for the Curt Echo Under-Dash brake controller. I do want to mention there is not a plug-in option for any brake controller for your Sorento so it does have to be hardwired, and what you need to add the 7-way and Echo is the following: - Curt Echo Under-Dash Wireless Brake Controller # C27JR - Universal Wiring Adapter for Curt Trailer Brake Controllers # C51515 - Universal Installation Kit for
  view full answer...


• Recommended Trailer Hitch, Wiring, And Brake Controller For A 2019 Ford F-150 XLT
  
• Some models have a plug-in port to easily wire in a brake controller, but there isn't a way for us to know if the specific one you're looking at has this connection available without physically searching for it in the vehicle. "Tow Mode" on the shifter only affects the shift point for the engine to help protect it while towing and wouldn't activate the brakes on the trailer. If you really don't have a factory 4-way or 7-way connector at the back of the truck then you'll need to splice
  view full answer...


• Troubleshooting Trailer Error When Using Curt Echo Under-Dash Controller on 2020 Honda Ridgeline
  
• Thank you for all of the info! The Curt Echo Wireless Trailer Brake Controller # C51180 just requires the trailer lights and 12V power pin to operate properly but the Curt Echo Under-Dash Trailer Brake Controller # C27JR and Custom Wiring Adapter # C51392 require your 2020 Honda Ridgeline to have the tow package so all of the wiring exists on your 7-Way - especially the brake control pin in the 5 o'clock position (see attached). If you grab a tester and put it on that pin and then
  view full answer...


• Correct Harness for Curt Echo Under-Dash Trailer Brake Controller On 2017 Chevy Colorado
  
• In order to install the Curt Echo Under-Dash Trailer Brake Controller part # C27JR on a 2017 Chevrolet Colorado you'll need the Universal Wiring Adapter for Curt Trailer Brake Controllers part # C51515. There is no plug present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash. I have also attached a review video I did on this brake controller below.
  view full answer...


• Parts Needed To Install the Redarc Tow-Pro Liberty on a 2018 Freightliner XC Chassis
  
• Yes, there is a way to have a plug and play installation if your 2018 Freightliner XC has the factory towing package. There will be a plug to the left of the brake pedal, behind the plastics shroud that encloses the left portion of the lower steering column. I have attached a picture below for reference. If this plug is there you will be able to use the Plug-In Wiring Adapter item # 3027-P and the Redarc Tow-Pro Wiring Adapter item # 331-TPH-017. These two adapters will allow you to connect
  view full answer...


• Is There a Brake Controller Adapter Plug for 2022 Jeep Grand Cherokee L
  
• Yes, there is a brake controller plug under the dash on a 2022 Jeep Grand Cherokee L. I recommend using the Curt Echo Under-Dash Trailer Brake Controller part # C27JR with the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51446. The Curt Echo installs behind the dash so there is no drilling into the vehicle nor do you have to worry about taking up leg room. It uses your mobile phone for setup. The adapter then makes for a plug-in-play install.
  view full answer...


• How To Install The Curt Echo Bluetooth Module On A 2018 Toyota Highlander
  
• I took a look at the Curt Echo Under-Dash Trailer Brake Controller # C27JR that you're interested in for your 2018 Toyota Highlander, and I was able to sort out the confusion you're having. If you take a look at # C27JR you'll notice that there is a plug hanging off of the module. This is used to either connect to a vehicle-specific wiring adapter, which would plug directly into the under-dash junction box, or it will connect to a universal wiring adapter # C51515, which will then be
  view full answer...


• Brake Controller Install Harness for Curt Brake Controller on 2022 Ram 2500
  
• I have confirmed that the Curt # C51458 brake controller harness is compatible with the 2022 Ram 2500, and is the correct harness you'd need to install the Curt # C27JR Echo under-dash brake controller on your truck. The connector is located under the dash, to the right of the steering column. The connector works with all Curt brand brake controllers. I've linked to a video that explains how the Echo under-dash brake controller works, as well as to a video that shows where the under
  view full answer...


• Parts Needed to Install Curt Echo Under-Dash Wireless Controller on 2022 Lexus GX 460
  
• To connect the Curt Echo Under-Dash Wireless Brake Controller # C27JR to your 2022 Lexus GX 460 you'll need the Pigtail # C51515 you referenced. It doesn't look like any of our manufacturers have a plug and play adapter and when I checked the online owner's manual I didn't see a port or wiring mentioned for trailer towing so I recommend verifying the plug you found carries the functions needed for the brake controller. You will connect the following functions to these wire colors on the
  view full answer...


• Comparing Curt Echo C79DR and C27JR for 2019 Porsche Cayenne
  
• That is correct, both the # C27JR and the # C79DR are the same Curt Echo with a slightly different design and connection/mounting position. Both use the Curt Echo app on your phone and are compatible with the manual override button # C83HR if you would prefer to have a physical button in the cab. They came out about the same time, choosing between the two comes down to your preference. The # C27JR mounts under your dash as you said and will also require the # C51515 wiring harness.
  view full answer...


• Which Curt Echo is Better? The Inline or Under Dash
  
• Hey Jon, so in theory the inline Echo Mobile part # C51180 and the under dash part # C27JR should perform the same but we have found that the under dash version works a lot better so it would be the way to go. Overall performance and connectivity just is more consistent. It's also not easy for a thief to potentially steal like the C51180. Which to install it in your 2023 Honda Ridgeline all you would need is the part # C51392 and you'd be set.
  view full answer...


• Will Curt Echo Under-Dash Fit a 2023 Ford Explorer with Tow Package
  
• Yes, you will be able to install the Curt Echo Under-Dash Wireless Brake Controller # C27JR on your 2023 Ford Explorer using the Wiring Adapter # C51322. Curt has yet to confirm this fitment (January 2023) but the wiring adapter for that vehicle hasn't changed in 20 years so I'd be shocked if they changed it now. I like this brake controller because it's completely hidden yet still maintains full control over your trailer brakes, even if you have to close your phone app. If you'd like
  view full answer...


• Troubleshooting Curt Echo Brake Controller That Feels Weak
  
• Sounds like your Curt Echo Under Dash Brake Controller part # C27JR that you referenced is installed properly but is set at too low of a setting to really feel the braking power. I would recommend increasing the max braking output level as well as the sensitivity until you find the setting that works best.
  view full answer...


• Where is Brake Controller Adapter Plug Located In 2002 Dodge Ram Pickup
  
• The green connector in your truck is not the correct plug. It is normally a blue plug like what I have shown in the photo that plugs into the adapter part # C51332 if you are using a Curt brake controller like part # C51170. There will be a port to plug into if the truck came with a factory 7-way plug just to the right of the emergency brake. If the 7-way plug was installed after-market, you will need to see how far the wires from the plug are extended so you can complete the install
  view full answer...


• Curt Spectrum Brake Controller Showing no Trailer on 2000 Dodge Ram 2500 After Replacing Connectors
  
• Yes, you are definitely on the right track. If your Curt Spectrum Trailer Brake Controller # C51170 is still not showing a trailer is connected and you have already replaced the connectors, I think it has to be a short either on the brake wiring or the brake magnets themselves. Before replacing your brake assemblies entirely, start by just checking the wires to the brake magnets (if you have not done so yet) and look for wires that may be pinched or otherwise damaged and fix as necessary.
  view full answer...


• Installation of Brake Controller on 1997 Ram 1500 Club Cab with Factory Trailer Plug
  
• We do appreciate your continued patronage and I think we can assist you with this. If you can't find the plug and the dealer doesn't offer any help on this, then you can hard wire in the controller to your 1997 Ram 1500, so you will be able to install the controller it'll just be a bit more time consuming. You will need a circuit tester like the # PTW2993 to test wiring functions under the dash, and you may need some butt connectors like the # DW05745-5 to complete your wiring connections.
  view full answer...


• Quality Trailer Brake Control for a 2006 Dodge Durango
  
• You are thinking of Tekonsha brake controllers. They are pretty much the leader in the brake controller industry. The Curt controllers would not be my first choice. I prefer Tekonsha controllers because they have a long proven track record of quality and performance. The Curt controllers are a less expensive option but they are new to the brake controller industry. They did have some performance issues initially but they are improving. I recommend the Tekonsha P2, # 90885. This is a
  view full answer...


• Curt Brake Controller Recommendation for 2005 Dodge Ram 2500
  
• The price for the Venturer controller part # C74VV and install harness part # C51332 is tough to beat but a proportional brake controller will be a much better option. Proportional controllers sense how hard you are applying the brakes and apply the trailer brakes the same way. Time-delayed like the Venturer put out a preset amount of braking power so they aren't as effective. So instead the Triflex part # C24VV with the install harness # C51332 would be the better option for your 2005
  view full answer...