Part Numbers: K2AVAL8219,C31075
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab.
Features:
Specs:
The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (128 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Great easy plow to use. The hardware that came in was missing a couple nuts and bolts. Had to run to the hardware store a couple times to get the proper bolts and nuts. The plow doesn't come assembled. So expect a good evening to build this unit. First two years was great and the scraping was good. Back dragging slacks but again a lot of plows do that. So it's not terrible but does enough. Just leaves 1/4 of snow behind. But pushing snow forward works and scrapes nice on asphalt or concrete. The battery that came with the kit for the wireless controller didn't last 1 month. So be prepared to upgrade that. But it's been now on my 3rd year, one of the springs failed on it and currently searching for the replacement. The plow itself has a one year warranty so of course it's past due now. Overall it works and it's nice. Wish I had bought the power left and right but the manual lever works too. Also the side markers prematurely failed too so I had to buy meyer yellow ones from fleet farm. Cost another $xx. But I will update this as time goes.
Dealing with etrailer.com was definitely easy. They very much so appreciate any and all business. Shipping was pretty quick and they kept me informed on my order status all the way through as well with follow up to make sure everything was satisfactory. I have a 2019 TRD Pro Tacoma, I opted to just replace my skid plate with a lighter one given the slight addition weight of the hitch. On top of the fact I didn’t want to have to cut such a pricey factory part. Everything installed easily and while I’ve never had much reason to use fish wires I can tell you in this situation it’s a lifesaver. If I recall some people had issues fitting a ratchet to the top nuts. I used my stubby bolt through ratchet set and worked pretty flawlessly. Got to say over all I have zero complaints, some people mentioned the loss of ground clearance and/or approach angle but it’s really not that intrusive. I would definitely recommend this to anyone looking to make their Tacoma a little more versatile. My main objective was to be able to use my Surf Mate hitch rod/cooler set up without it getting in the way of the tailgate. Everything works great!
Well engineered product. Less than 30 min to install on my 2022 TRD Off-road.
No trimming at all on TRD Off Road model.
It looks a little utilitarian up close, but not so much from a distance. My cycle jack worked perfectly for this task. BTW.. The fish wires are a stroke of genius.
Dan G.
6/18/2023
I installed this to accommodate the adapter for my 20 year old SnowBear plow. I only plowed twice during the winter of 22-23, but the setup worked perfectly. I am also able to attach my 8000lb winch for temporary use. I didnt mention in my original review that the single, right side factory tow hook had to be removed. On the 2022 TRD Off Road the front approach angle will be affected by a few degrees since the hitch hangs below the skid plate.
It has been working very well as we have actually had a decent amount of snow so far this year. took a little longer than I thought it would to assemble and mount it but after it was on it works great and looks good.
Installed a Curt 31075 Front Hitch on a 2019 Toyota Tacoma TRD Pro. Took about 2 hours since the skid plate needed to be removed and cut. I'm a little concerned about how deep under the bumper the receiver pin is. My purpose for installing is to use my SnowSport Plow. The interceptor for the plow is going to be close to the front license plate. The Pro right side hook had to be removed permanently but I did invert it and reinstall it just to fill the bolt holes it came from. 2 inches from the front of the Pro skid plate needed to be cut off. I split a commercial grade garden hose and covered the sharp cut edge. A receiver hitch plug was cut and inserted in the back (in photos). Thanks Curt, etrailer, Carol and Conner from etrailer.com. Hope the pictures help someone considering a front hitch on their TRD pro.
Shawn P.
9/20/2021
The Curt front hitch receiver works great. No issues with the Snowsport Plow contacting the front license plate. Ive adapted the front receiver with a hook and pulley. I use this hook and pulley to pull out stick lawn mowers and when magnet grapnel fishing from roadway bridges.
I installed a rear hitch from e trailer and later ordered a front hitch so I could use my home made snow plow from either end of the truck. Some installation tipsI had to use to complete the installation, I could not get the nut on the bolt my hand would go into the hole so I mounted a screw onto a stick hung the bolt on the screw and turned the bolt with a screw driver. I also had to hold the bolt with a pair of needle noise vice grips. I was able to open the hood and gain access to the bolts to tighten them with a 3/8 drive ratchet with a piece of 3/4 inch EMT conduit to extend the handle with a deep socket. The 12 inch high box with the 3/4 inch sticks on top of the box held the hitch in place and made it a one person job. I showed the rest or the air dam I cut out. I am very happy with both Curt hitches thank you e trailer.
Installing the Curt front hitch on a 2017 Tacoma. To gain full access to use a torque wrench I took off the air-dam, grille, and the front bumper cover. Be careful with removing the bumper cover from the wheel wells. The snap tabs can break before they pull out. With full access I could snap the torque wrench to the specified number. I had to trim the air dam a few times and it fits around the hitch. I like the way the Curt hitch does not affect garage door clearance and does not affect approach angle.
James B.
8/25/2019
One year later and the Curt hitch is good as new. I have a shock absorbing bumper I keep on the hitch for the rare times I can help push a disabled car to safety.
The DK2 plow and hitch are awesome! As always, the communication from Etrailer from order to delivery is top-notch. Assembling the plow and mounting the hitch was easy. Took about 4 hours with me enjoying a few beers and taking my time one evening after work. Took on wiring the next day. I like a clean finish, so this part took me about 2 hours. I placed the control module on the fuse block as suggested (etrailer's videos are a BIG help). I placed the remote transmitter on the drivers side. I ran the plow lead down to the hitch from inside the vehicle. There is just enough wiring supplied and this allows me to tuck the connector inside the hitch when not in use. A hitch cover protects it from the elements. First use was 30" of snowfall! I plowed for about 3 hours straight. The engine compartment did get warm which made the control wiring warm and pliable; so the connector came out of the control module mid way through plowing. I used some dielectric grease and it stayed connected the remainder of my plowing. It takes some practice to hitch up to the plow easily. This set up took a beating first time out. Sure glad I ordered it!!
I don't write reviews very often but this Hitch was worthy of a great review! I received my order promptly and everything was packaged well and in good condition. I just finished installing the hitch on my Toyota Tacoma TRD-Off Road. It took me about one hour but that is only because I was taking my time and being careful. There were no problems. No trimming or modifications necessary for my TRD-Off Road. Looks great and is exactly what I was looking for. Thank you
No fuss, no hassle. Quick to ship, responsive, and package arrived when they said it would, all parts and instructions included. Hitch was surprisingly easy to install. Main tip is that if you want the plastic air dam back on your Tacoma, be sure to remove, do the cut-outs, then reinstall before installing the hitch. I didn't do that, but I'm not inclined to remove it and install the air damn anyways - extra plastic crap that I don't think serves much purpose.
Review: 2020 Toyota Tacoma TRD OffRoad
Installation Notes:
I have a brand new 2020 Tacoma TRD OffRoad... I purchased this front hitch, Curt #C31075 from eTrailer.com, it arrived on 3/11/2020. I just installed it on 3/12/2020... About a 45 minute job, only myself needed for the install. This front receiver fits perfect! I dont have the airdam/spoiler, AKA: chinstrap... Not an issue. I dont have a TRDPro, so didnt need to trim the TRDPro skidplate per Curts instructions. Skidplate stayed on whole time during installation... Bit tricky top bolts, but fishwires are perfect... Need long screwdriver or rod to reach in and hold head of top bolts steady when starting to tread them. Even with extension or crows feet on torque wrench, hard to know how much to get to [torque rating specified in instructions] for top 1/2inch bolts. Extensions alter the torque reading and make wrench inaccurate. Put a longer bar on end of wrench to get greater torque.
This DOES CONFIRM to fit a 2020 as the instructions from Curt do list the year as: 2016-Present.
Not quite rated as high as DrawTite, but so much better looking! Still has same 9,000 lb line pull.
Please see photos.
Thanx!!!
Fit like a charm. Very easy install. Installed on a 2023 Tacoma Off Road for a front winch, snow plow or storage rack. I used a small floor jack to assist. Made it very easy.
Inpreesd went on no hitch
Like the wellds.well made
All of my experiences with etrailer have been good, and all Curt products purchased have been as well. What's not to like?
Sandy M.
2/17/2018
In the year Ive been using it, Ive never even thought about the hitch. Is there a better recommendation than that?!
Bolted right up. On a TRD-Offroad no trimming of air dam or skid plate needed. I plan to use it to back a boat into a tight space and in the future a removable winch than can be run in the rear or front when needed. Does remove a tiny bit of approach angle but I would be smashing my bumper at that point anyway.
Great hitch, easy install, fast delivery, and well priced. I installed this in 20-30 minutes by myself. Works well to install a rack on the front or to add a better tow point.
We purchased your Curt front hitch mount for our 2018 Tacoma. The process was easy, instructions and photos allowed us to be confident the assembly would fit, work as intended, and be reasonable to install ourselves. The shipment arrived four days earlier than estimated. Etrailer contacted us on receipt of the order, at shipment, during transit to offer support if needed, and to confirm delivery.
Installation was straightforward, fitment is perfect. The wire tools for locating the bolts & flanges worked perfectly, a very cool tool.
We will use the hitch with a smaller boat / trailer that cannot be seen from the truck cab when reversing.
Over the years we have purchased several times from etrailer, always a good experience.
Overall, I was satisfied. Instructions could be more complete, and it was missing a few bolts and nuts. But Looks like a solid plow for the application I need.
Good product. Easy to install if directions are followed closely. Looks good on my Tacoma Off Road model. Little effect on ground clearance. Works great. Will be using to plow with homeowner plow.
High quality and easy to install
The plow works very well. It's not real heavy duty but it has been adequate so far. It went together quite easily and is fairly light and maneuverable when I take it off for the summer. I am glad it has the extra turnbuckle braces beside the receiver to stiffen it up. I almost wish I had gotten a wider plow. When I have it set for straight forward it is good but when I have it angled it is a bit narrow for my Suburban. One minor problem I had was when I hit a hard object and the plow snapped forward and down both of the little red plastic end markers that stick up broke off. Long exposure must weaken the plastic.
It is perfect. Easy and fairly quick to self install without need for specialized tools, or parts outside of what comes in the box. Handles my snow plow well. Fits my Tacoma like it was made for it (yes, I know, it was). Had one of these before on my old F150, with similar experience. Would buy again without question.
Overall, it’s very easy to install. By myself, it took roughly about 45 minutes. Through the aid of a lift jack, I was able to center the mount on the jack and lift it and hold it in place after threading the bolts through the crossbeam. As several other customers have stated it’s best to use either needle, nose, pliers, or some type of forceps to hold the ball in place at the upper bracket, and then try to thread the nut on. I did have to loosen for facia screws in order to give myself some room to get the socket up to the upper bolt.
Also, as other folks have mentioned the included instructions with the pictures are horrible. After purchasing, I received an email for a review with a link to some Q&A and instructions. I use the link and open it up on my iPad and had great color photos. The color photos make all the difference when doing the install.
Item was ordered with a five day delivery (roughly) was expected. The item was delivered three days early to my surprise.
I use this front hitch to carry bicycles, fishing rods, or a cooler rack. It performs flawlessly for every application!
Have owned on different trucks. Easy installation and just what I have needed. Love em
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
B.mack
10/13/2023
A year later and I’m still loving this hitch, I have since sold my 19 TRD Pro and bought a 22 TRD OR LB and continue to enjoy the functionality of this wonderful product.