Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall
part number: K2AVAL8219

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab.

Features:

• Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
• Electric winch raises and lowers plow with sturdy, nylon strap
  • 2.4 GHz Wireless remote control allows you to operate the plow from the comfort of your vehicle
  • In-cab switch serves as a reliable backup to the remote control
• Adjustable, 3-position blade can be manually angled left, right, and straight ahead
• Strong rubber deflector on top of plow directs snow down and away from your windshield
• Hardened steel edge breaks up packed snow and ice
• Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
• Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
  • Can extend life of the plow if you hit an obstruction
• Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
• Red visibility markers help you see plow edges so you can steer away from obstacles
• Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
  • Wheel height is adjustable to match your vehicle height
• Plow handle with knob lets you easily move plow up and down during mounting
• Safety chain holds plow in raised position during travel
• Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
• ISO certified
• Simple installation
  • Slides into your vehicle's 2" front trailer hitch receiver

Specs:

• Application: 2" x 2" hitch receivers
  • Cannot be used with hitches or receiver adapters that have built-in drops
• Blade dimensions: 82" wide x 19" tall
• 3 Blade angles:
  • Left 45 degrees
  • Straight ahead
  • Right 45 degrees
• Distance from center of hitch pin hole to the front edge of plow: 50"
• Winch lift capacity: 3,000 lbs
• Weight: 265 lbs
• 1-Year limited warranty

The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.

Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.

To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.

The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.

How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.

The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.

To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.

When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.

Easy Lifting with Electric Winch

The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.

Detail K2 Features

The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.

Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.

Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.

AVAL8219 Detail K2 Hitch Mount Snow Plow - 82" Wide x 19" Tall Blade

Item # K2AVAL8219

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31109

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

• Front-mount hitch provides attachment point for hitch-mounted accessories
  • Winch, spare tire carrier, snowplow, cargo carrier and more
  • No more blindly backing trailer in - just hook it up and drive it forward
• Custom fit is designed specifically for your vehicle
• Precision, robotic welding maximizes strength and improves fit
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Gloss black powder coat finish over steel resists corrosion
• Sturdy, square-tube design
• Assembled in USA

Specs:

• Line pull: 9,000 lbs
• Vertical load: 500 lbs
• Gross trailer weight: 5,000 lbs
• Receiver opening: 2" x 2"
• Pin hole diameter: 5/8"
• Limited lifetime warranty

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

31109 Curt Front-Mount Trailer Hitch Receiver

Customer Reviews

Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall - K2AVAL8219

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31109

Average Customer Rating:  4.7 out of 5 stars   (58 Customer Reviews)

Order: RelevanceNewestRating - High to LowRating - Low to High Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Ray01/02/2023

Great easy plow to use. The hardware that came in was missing a couple nuts and bolts. Had to run to the hardware store a couple times to get the proper bolts and nuts. The plow doesn't come assembled. So expect a good evening to build this unit. First two years was great and the scraping was good. Back dragging slacks but again a lot of plows do that. So it's not terrible but does enough. Just leaves 1/4 of snow behind. But pushing snow forward works and scrapes nice on asphalt or concrete. The battery that came with the kit for the wireless controller didn't last 1 month. So be prepared to upgrade that. But it's been now on my 3rd year, one of the springs failed on it and currently searching for the replacement. The plow itself has a one year warranty so of course it's past due now. Overall it works and it's nice. Wish I had bought the power left and right but the manual lever works too. Also the side markers prematurely failed too so I had to buy meyer yellow ones from fleet farm. Cost another $xx. But I will update this as time goes.1492298

Click to Enlarge

by: Daniel12/20/2022

It has been working very well as we have actually had a decent amount of snow so far this year. took a little longer than I thought it would to assemble and mount it but after it was on it works great and looks good.1487668

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Calvin 03/18/2023

2010ChevroletSilverado

It arrived in a timely manner and everything was there. But just like other reviews the packaging was weak and the receiver hitch was able to move around inside the oversize box, but thats was no big deal. Also like other reviews the bolts are too short. Tightened all the way down, the bolt is just a thread short of being flush with the nut. Which is disappointing to know after the reviews stating as such. I thought e-trailer would have rectified that. But it's on, and seems to be strong and good fit.1538713

Calvin

3/19/2024

Fine, except I wish I would have ordered and installed the one that is higher off the ground. I didnt want to cut a hole in the front so I got the one that installed underneath. Its lower than Id like it to be. Ive bumped the ground a few times.

by: Aaron01/23/2021

The DK2 plow and hitch are awesome! As always, the communication from Etrailer from order to delivery is top-notch. Assembling the plow and mounting the hitch was easy. Took about 4 hours with me enjoying a few beers and taking my time one evening after work. Took on wiring the next day. I like a clean finish, so this part took me about 2 hours. I placed the control module on the fuse block as suggested (etrailer's videos are a BIG help). I placed the remote transmitter on the drivers side. I ran the plow lead down to the hitch from inside the vehicle. There is just enough wiring supplied and this allows me to tuck the connector inside the hitch when not in use. A hitch cover protects it from the elements. First use was 30" of snowfall! I plowed for about 3 hours straight. The engine compartment did get warm which made the control wiring warm and pliable; so the connector came out of the control module mid way through plowing. I used some dielectric grease and it stayed connected the remainder of my plowing. It takes some practice to hitch up to the plow easily. This set up took a beating first time out. Sure glad I ordered it!!941715

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: David10/16/2023

I have a trailer/boat storage business and use my front hitch often. It has made moving trailers a lot easier! I highly recommend this product!1682777

by: Brad11/07/2022

Overall, I was satisfied. Instructions could be more complete, and it was missing a few bolts and nuts. But Looks like a solid plow for the application I need.1464734

by: Kimber11/15/2022

1993 Chevrolet Suburban

The plow works very well. It's not real heavy duty but it has been adequate so far. It went together quite easily and is fairly light and maneuverable when I take it off for the summer. I am glad it has the extra turnbuckle braces beside the receiver to stiffen it up. I almost wish I had gotten a wider plow. When I have it set for straight forward it is good but when I have it angled it is a bit narrow for my Suburban. One minor problem I had was when I hit a hard object and the plow snapped forward and down both of the little red plastic end markers that stick up broke off. Long exposure must weaken the plastic.1469208

by: Terry 12/14/2023

I wish I had done it sooner! Makes Taking our bicycles a breeze, Kayaks on the back of our RV and the bikes on the front.1702522

by: Steven 06/28/2023

2008 ChevroletSilverado

Package arrived in a timely manner. All parts were included and packaged well.
Have an 08 Chevy Silverado 2500 HD and instalation was a breeze. Instructions included were good but would suggest watching the vidio on the website also.1610557

by: Paul 12/07/2023

Bolted up with no problems in like 20 m inutes1699532

by: Scott02/09/2022

Well worth the money! No longer having to worry about someone else coming to plow is a God send!!!1260735

by: Sterling07/15/2017

2007 Chevrolet Silverado New Body

The Curt front mount hitch attached easily, as advertised. We have now been able to travel with our bikes loaded on front and the slide-in camper on back. Plus, it arrived quickly enough to attach and use for our next planned camping adventure!406120

Sterling

7/17/2018

We think it is a great product and was easy to install. Our friends saw it and we recommended etrailer to them

by: Michael12/21/2023

2010ChevroletSilverado

Great Product!
Fast delivery 1704373

by: Daniel08/19/2023

Good for the price, really needs to be able to be able to angle from the cab of the truck. (deluxe model.)1650372

by: Glenn W05/10/2017

2008 ChevroletSilverado

Heavy duty and heavy, I had it installed by myself (with the help of a floor jack)in less than 30 minutes, love it. Now UPS, the shipper leaves a lot to be desired. Good thing the hitch was built great because the packaging was destroyed.378599

Glenn W.

5/17/2018

Yes I still think it is a great product, no I dont use it every day but when needed its there.

by: Donald J01/11/2022

Jeep Wrangler

I love having this plow easy to install, easy to attach and remove on my 2 door Jeep Wrangler. I would recommend it to everyone looking for a plow.1241487

by: Heng-yi02/28/2018

2009 ChevroletSilverado

I bought this about an year ago for my 2009 Chevy Silverado to push 28 ft trailer. This thing saves my life every time when I need to push my trailer back to the back of the driveway. I have a narrow driveway and long too. In the past I will have to try many times to back in the trailer. Now with the front hitch the back in is much more easier. However I do find one thing that is not expected, the hitch is way too low that I am not able to use my flip folder jack foot, it does not have enough clearance to make it fully stand. I have to get a jack to lift the trailer in order to have the flip folder stand to support the trailer. But for the regular trailer jack is OK.

479658

by: Tim A.07/10/2014

2009 ChevroletSilverado

Curt's front mount hitch reveiver is resonably priced, stoutly made, and finished with what appears to be a solid shiney black powder coating. I especially like the fact that the receiver is positioned just below the front license plate so no modifications are needed to the front fascia, or removal of license plate to utilize. Hitch was shipped in a stout cardboard box, but not much internal padding. This seems to be Curt's standard method, as I also purchased a 34" hitch extension and was packaged similarly. The items are not likely to become damaged in shipping, but a lil more thought and effort could be put into their shipping methods. But for the value and quality you recieve that's a minor issue. Love Curt products!!!140585

by: Ricky 08/21/2022

2007 Chevrolet Silverado New Body

Easy install took about 20 minuets. Good quality with all installation hardware needed included.1368037

by: Tp Thomas01/18/2020

Difficult to put together - manufacturing quality is terrible - holes drilled off of center, causing plenty of work-arounds. In the end, it was a small plow with a complicated and messy assembly instruction. I resold it for $100 to get rid of the eye-sore. I don't recommend this at all.739224

by: Kevin 10/28/2022

Works great even better than the old fisher plow even though this one swings manually, the blade goes much higher when pushing up banks of snow.1458613

by: John01/14/2019

2008 ChevroletSilverado

I have a 2008 Silverado. The Hitch was installed in less than an hour. The pair of bolts that are installed through the frame seem to be slightly short but remember this unit is installed in shear, meaning that the loads applied to this hitch are perpendicular to the bolt, so the nut just needs to hold the bolt in place. You still need to torque to german specs "good n tight" (haha). the bolt will come flush to the nut face. All in all a very simple clean install. Im using this for a Myers Home Plow, which also installed simply.597539

by: Allen B.05/02/2014

2007 Chevy 2500 HD

Very well built, good fit and finish and very sturdy. Installed in about 1/2-hour. The "square hole spacer" for the carriage bolt had to be fed through the front of the frame rail (past the tow hook) as it was ever so slightly wider than the hole underneath the frame rail where the instructions show it being fed. I agree that the hex bolts could be about 1/4" to 1/2" longer, but once tightened the bolt is flush with the end of the nut. I'm glad I purchased this as now I can use my 12,000 lb. winch (& winch cradle) on both the front and back of my 2007.5 Chevy 2500HD.128533

by: Kurt06/08/2019

2009 GMC Sierra

This Curt 31109 front hitch went on a 2009 GMC 2500 Sierra crew cab with a Duramax Diesel. Shipping was incredibly fast - just 1 day! The hitch appears well built and nicely finished - and it's made right here in the USA! It fit perfectly and was very easy to install. No trimming of bumper plastic was required. My wife and I are retired and we use this truck to pull a large 5th wheel trailer or carry a truck camper. We will transporting our bicycles on the front hitch. I should have done this earlier.655038

by: Craig02/27/2018

Install was quick and easy
Bolts that go through frame were 1/4”too short.
Works great!479373

Craig

2/27/2019

Easy to install and works great

25

58

Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?

• Recommended Snowplow to Use on a 2016 Chevrolet Silverado 1500 for a Personal Driveway
  
• For your 2016 Chevrolet Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219 with the Curt Front Mount Trailer Hitch Receiver part # C31069 in order to plow your 800' long lane. The Avalanche Snowplow is 82" wide x 19" tall. It has an electric winch so you can make all of your adjustments in-cab, adjustable blade for precision plowing, and a rubber deflector on top which diverts snow away from your windshield. The other thing I like about this plow is that
  view full answer...


• Hitch and Hitch-Mount Snow Plow for 2010 Volkswagen Tiguan
  
• The Detail K2 Avalanche Snowplow for 2-Inch Hitches # K2AVAL8219 is intended to install into a 2-inch hitch receiver. In most cases a plow will be used on a front-mounted hitch but a rear-mounted hitch can also be used. Rear-mounted 2-inch hitches are offered for your 2010 Volkswagen Tiguan, such as etrailer hitch # e98906, which is the one I recommend. This hitch installs without drilling but does require a bit of fascia trimming. All required hardware is included with the hitch.
  view full answer...


• Available Front-Mount Hitch Receiver for 2007 Ford Explorer Sport Trac
  
• Only a front-mounted aftermarket hitch is offered for your 2007 Ford Explorer Sport Trac. This comes from Curt, part # 31545. This hitch has a 500-lb vertical load rating, making it a great way to add a snowplow like the hitch-mount Detail K2 # K2AVAL8219. All aftermarket accessory items for your vehicle are shown on the linked page.
  view full answer...


• Difference in Detail K2 Snowplow for 2" Hitches and the Detail K2 Elite Snowplow
  
• The Detail K2 Elite Snowplow for 2" Hitch, # K2AVAL8219ELT on your 2017 Nissan Frontier uses an electric actuator raise and lower the plow whereas the Detail K2, # K2AVAL8219 uses an electric winch. The Detail K2 Elite Snowplow, # K2AVAL8219ELT has an internal clutch that prevents damage caused by overextension of the actuator. It also uses a chain instead of a strap on the other model. For a front mounted hitch on your 2017 Nissan Frontier, I suggest the Draw-Tite Front Mount Trailer
  view full answer...


• Detail K2 Avalanche Snowplow For 2004 Chevy Avalanche 1500
  
• I contacted Detail K2 snow plows and they have successfully mounted their plows on the 2004 Avalanche 1500. I recommend Detail K2 Avalanche Snowplow for 2" Hitches part # K2AVAL8219 and curt front mount hitch part # 31302. They do not have any notes stating any issues with the fit on a 1500.
  view full answer...


• Snow Plow Recommendation for 2019 Jeep Wrangler
  
• We have just what you'd need to install a plow on your 2019 Jeep Wrangler for the plow I recommend the Detail K2 Avalanche part # K2AVAL8219 which is 82 by 19 inches in size and comes with a winch setup to make raising and lowering the plow very easily from inside your vehicle. It has 3 blade angles it can be set at and comes with a wireless remote too. To mount it on your vehicle the front hitch part # C31086 is a custom fit for your vehicle and is the hitch that Detail recommends
  view full answer...


• Parts Needed To Mount Detail K2 Snowplow # K2AVAL8219 On Front of 2020 Nissan Frontier
  
• The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver # 31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the winch on the plow. I recommend adding the Timbren Front Suspension Enhancement System # TFXF1004A as it is specifically designed to help support the front suspension when using a plow. This will help reduce the amount of front end sag when carrying the plow.
  view full answer...


• Compatibility of Hitch-Mount Snow Plow on 2013 Ford F-150
  
• We offer a range of 2-inch hitch-mount snow plows that can work on your 2013 or 2014 model year Ford F-150 so long as it has a front-mounted 2-inch hitch receiver. I know of no particular issues with using a snow plow on the later model F-150s. If you need a front hitch for your truck you can use the link at right to select a 2-inch hitch. Since you did not specify whether you have a 2013 or 2014 I have included two links, one for each model year, that you can use to select your truck
  view full answer...


• Can you Install a Snowplow on a 2017 Ram 1500 4x4 with Electronic Steering Assist
  
• I spoke with all of the snowplow manufacturers we carry and none of them have ever heard of or had any issues with installing a snowplow on a 2017 Ram 1500 4x4. I would call the dealer to see if they say otherwise but I would not consider the statement to be true as all of the manufacturers state they have sold snowplows for this vehicle and have not heard back about the problem you described. For your Ram, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219 which installs
  view full answer...


• Will This Detail K2 Snow Plow Fit A 2016 F150 With A 4 Lift & 35" Tires?
  
• The Detail K2 Snowplow # K2AVAL8219 will fir your 2020 GMC Sierra 1500 even with the big 35" tires and lift. The potential issue is functionality. A plow attaches to your frame, which is now separated from your suspension by another 4 inches and then there's the distance to the ground depending on what size tires you're running. Using 35's will just make the distance even greater. That's where you'll see your plow not pushing properly. The plow needs to transfer and distribute loads back
  view full answer...


• Detail K2 Snowplow for 2001 Dodge Ram 1500 Sport
  
• All snowplow kits offered for the 2001 Dodge Ram 1500, shown on the linked page, exclude the Sport version from their fits. My technical contact at K2 advised that instead of a front-mount hitch you CAN use their Custom Mounting Bracket kit # K284309. This has no known compatibility issues with the Ram Sport according to my contact. With it you can use a plow like # K2RAMP8219.
  view full answer...


• Snow Plow And Hitch For A 2017 Ram 1500 Rebel 4x4
  
• The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 and the Curt Front Mount Trailer Hitch Receiver # 31374 will work for your 2017 Ram 1500 Rebel 4x4. The Draw-Tite # 65062 has a line load capacity of 9,000lbs, and vertical load limit of 500lbs.
  view full answer...


• Can I Plow Wet And Heavy Snow With The Detail K2 Snowplow For Residential Areas
  
• I did some research and I got the following information. You will have to be careful plowing wet and heavy snow with the Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall, part # K2AVAL8219. According to K2, "Your K2 snowplow is not intended to clear the snow deposits created by large municipal or commercial snowplows, which contain heavy compacted, frozen lumps of snow and ice, and could damage the plow and vehicle.
  view full answer...


• Will Agri-Cover SnowSport Front Mount Hitch Work With Snowplows on 1994 Jeep Wrangler YJ?
  
• The Agri-Cover SnowSport Front Mount Hitch A40163 for your 1994 Jeep YJ can work with some K2 plows, the Detail K2 Avalanche Snowplow # K2AVAL8422 which is 84" wide x 22" tall and weighs 283 lbs as well as the Detail K2 Avalanche # K2AVAL8219 which is 82" wide x 19" tall and weighs 265 lbs. The Agri-Cover hitch will work with those K2 plows though it is designed to work with Agri-Cover SnowSport HD plows A40000HD which is 84" wide x 18" tall and weighs 114 lbs, A40040HD which is 96"
  view full answer...


• Is Fascia Trimming Required For Installation of Curt Front Mount Hitch # 31109 on a 2010 GMC Sierra
  
• You are correct, the Curt Front Mount Hitch for the 2010 GMC Sierra, # 31109, does not require trimming for installation. I have provided a link to installation instructions and a video installation that you should find helpful. I have also linked a photo of the hitch installed on a 2008 Model HD Chevrolet Pickup, which is the same body style, for you to review.
  view full answer...


• Front Mount Hitch for 2008 Chevrolet Silverado 3500 Pickup
  
• I have attached a link to our front mount bolt-on hitches for 2008 Chevrolet Silerado 3500s for you. Both the Curt Front Mount Hitch # 31109 and the Draw-Tite Front Mount Hitch # 65050 have a 2 x 2 inch hitch receiver, a line pull maximum of 9,000 pounds, a vertical load max of 500 pounds, and a gross trailer weight max of 5,000 pounds. The Curt front mount hitch's receiver will sit just below the license plate on your vehicle. This hitch will provide an easier installation. I have
  view full answer...


• Front Hitch Option for 2005 Chevy Silverado 3500
  
• Due to the design of the front of your 2005 Chevy Silverado 3500 the only place you'll be able to have a front hitch opening is below the front fascia like where the Curt # 31108 installs. This would be best option we have, but if you really needed something that sits higher you'd probably need to find a fabricator who would be willing to modify the front fascia of your truck and see if they could install one higher.
  view full answer...


• Curt Front Hitch 31109 Compatibility with Minute Man 2 Snow Plow Mount
  
• In most cases a front-mount hitch and a snowplow mount will install at the same points on the vehicle frame and usually they will interfere with each other. There could be a certain combination of hitch and plow that might avoid this common-mounting-point issue but it is unlikely since both items need a very strong mounting point on the vehicle in order to function. Makers of aftermarket products do not test their products fits along with other aftermarket items since there are so many
  view full answer...


• Can a Front Mount Trailer Hitch be Used for a Bike Rack on a 2010 GMC Sierra 2500HD
  
• It is possible to use a bike rack on a front mount trailer hitch like # 31109, but you will want to consider a few things before doing so. First, it could hinder driver visibility, not much, but there is a chance that the top of the bikes will sit above the hood, so you may not be able to see as much of the road right in front of you. Second, the bikes may block the head lights or other indicating lamps on the truck which could be dangerous. If you cannot put the bikes in the rear because
  view full answer...


• Ground Clearance & Angle of Curt Front Mounted Hitch on 2010 Chevy Silverado Super Duty
  
• For your 2010 Chevy Silverado Super Duty truck, the Curt Front Mounted Trailer Hitch Receiver # 31109 is a confirmed fit. The ground clearance will be dependent on your wheel size and your suspension. I reached out to my tech contact at Curt and confirmed this hitch will be right up against the bumper, so if you measure from the bottom of your bumper 2-3/4 inches, that will be your ground clearance with this hitch. The receiver will sit level as long as your truck frame is level.
  view full answer...


• Why Would Curt Hitch 31109 Seem to Be too Narrow to Install on Truck
  
• Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some people will use open steps for leverage, vices and even car jacks to apply controlled force to bend the hitch back. You will want to look for flaking paint and physical stress marks on the hitch before and after you attempt to bend the hitch back.
  view full answer...


• Front Mount Trailer Hitch Options for a 2005 Ford Excursion
  
• We currently offer two front mount receiver options for a 2005 Ford Excursion; # 31114 and # 65022. Please note that with either, if the vehicle has the optional OEM fog lights they must be removed or relocated for receiver installation. I have linked instructions for both receivers for you. As far as where to buy one of these receivers the best place would be right here at etrailer! Current pricing is available on the product pages for each item.
  view full answer...


• Front Mount Hitch Recommendations for a 2006 Chevy Silverado
  
• There are several front mount hitches available that will fit your 2006 Chevy Silverado. If you have a 1500 LD you would want a part # 31302 If you have a 1500 HD you would want a part # 65028 If you have a 2500 or 3500 you would also want a # 65028 The Curt Front Mount Hitch # 31109 that your referenced is designed to fit newer model Silverados and would not be recommended for you.
  view full answer...


• Will Curt Front Mount Hitch part 31109 Fit a 2009 Chevy Silverado
  
• This hitch will fit a 2009 GMC or Chevy 2500 or 3500 pickup. If you have a 1500, you would use part # 31322 or 65052.
  view full answer...


• Curt Front Mounted Recevier 31108 vs 31109 Fit on a 2002 Chevy Silverado
  
• Although the hitches look very similar, the # 31109 is for the 2nd gen 2008 Silverado like your friend's, and the # 31108 if a fit for the 1st gen, like your 2002 model. The two hitches are very similar, but the # 31109 would sit 2 inches lower on your truck than the proper fitting # 31108 would. If losing two inches of ground clearance isn't a deal breaker for you, your buddy's hitch would work fine for you. I've linked you to an install video that you might find helpful.
  view full answer...


• Recommended Front Mounted Hitch for a 2009 GMC Sierra 3500 Dually
  
• Yes, the Curt Front Mounted Hitch item # 31109 does fit the dually models of the 2009 GMC Sierra 3500. This hitch is custom fit and bolts to your GMC with included hardware.
  view full answer...