2020 Ram 1500 Classic Lamp Guards

I attached a picture that shows what the DeeZee Steps part #DZ16202-16255 look like when installed a Murano like your 2018 Nissan Murano. In it you can see there's plenty of clearance for mud flaps to fit in front of. So yes, this…

A trailer axle like part #e25GR does not have a designated speed rating. The tires that you use with this axle will be the determining factor for a speed rating. For example, the Kenda Karrier Radial Trailer Tire #AM35351DX is commonly used with…

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt. The size wrench you would use to install or remove this bolt is 15/16 inch.

If you were to install the EcoHitch #306-X7239 on your 2017 Ford Fusion then you would have to permanently remove the plastic underbody panel as you can see from the attached photo which is directly from the instructions. I have also attached a…

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7239 is a great option for a 2016 Ford Fusion. It has the larger 2" receiver tube opening which will greatly expand the variety of hitch mounted accessories to choose from. The…

The Blue Ox Acclaim Non-Binding Tow Bar #BX4330 is compatible with Blue Ox base plates that are between 23" and 30" apart on center. Since you're measuring 34" on center I recommend…

Yes, the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates #e47ZR would have enough adjustability between the 1-1/2" shank rise/drop and the 3" of tilt to meet your 4" difference. I've attached…

The 16 inches of height that the Yakima SkyBox NX 16 Cargo Box #Y95AV that you referenced would be the height above the crossbars of your 2005 GMC Yukon Denali. I attached a review video for this cargo box for you to check out also.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The B and W Turnover Ball hitch part #BWGNRK1309 is a confirmed fit for your 2015 Ram 1500 with an EcoDiesel engine. Since your truck has a such a short bed you are going to want to use the offset adapter part #BWGNXA4685 as well. Hopefully the…

I was able to track down the installation instructions for the EcoHitch Hidden Trailer Hitch Receiver #306-X7317 referenced in your question and have attached the images from the manual below. I have also sent you a separate email with the PDF file…

The etrailer Trailer Hitch Receiver #e98906 that you referenced has been confirmed as a fit for your 2013 Volkswagen Tiguan. As far as hitch installs go this is the easiest one to install. It is rated 3 out of 10 on the difficulty scale. Basically,…