Filter Results
$51.05 - $127.57
$18.83 - $18.83
$51.05 - $127.57
Videos
for Work Lights
Help Articles
for Work Lights
Expert Answers
for Work Lights
Hey John, yes the Tekonsha brake controller install harness part #3050-P is correct for your 2023 Nissan Frontier and would be what you would need to install the Prodigy P2 part #90885. This harness has one end that was designed to fit your truck…
view full answer...Hey John, To determine the correct replacement leaf springs for your trailer you'll want to jack up one side to take the pressure off the leaf springs and then can measure from the center of one eyelet to the center of the other…
view full answer...The connection on the Seaflo Submersible Utility Pump #SE54FR is designed to fit a hose with an inner diameter of 13 mm.
view full answer...Yes, the 0.9 Cu Ft Greystone Standard RV Microwave - 900 Watts #324-000105 is a great replacement for your Advent model MW912B as the only real differences is the Greystone being 1/8" taller without the trim, and being about…
view full answer...We have not yet replaced the Shock part #T1242600 on a Titan Model 10 Surge Brake Actuator so I do not have any specifics for you but I have attached a parts diagram which shows you how the unit is broken down. You can then use this to get a better…
view full answer...To replace the shock in your Titan model 10 actuator you are going to basically need to disassemble the actuator so that you have access to the shocks. Instead of describing to you how it comes apart I thought it would be more helpful if you had an…
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...There are a couple options to replace a Dexter part 023-340-00, which is a 7,000 lb hydraulic drum brake. One of the kits has a parking brake but are not free backing while the other is free back without a parking brake. - Dexter Hydraulic Brake…
view full answer...The axles on your tandem axle trailer are 4,400 lb AL-KO axles. The tag says 4,400 lbs max capacity, so that is what you need to follow. The brake drum size and bolt pattern do not determine axle capacity. If you want to replace these axles, I…
view full answer...