Filter Results
$24.16 - $174.99
$6.20 - $273.37
$8.21 - $82.93
Videos
for Work Lights
Help Articles
for Work Lights
Expert Answers
for Work Lights
A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…
view full answer...The Exterior LED Utility Light part #M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications so the power should be brown, the neutral should…
view full answer...The connection on the Seaflo Submersible Utility Pump #SE54FR is designed to fit a hose with an inner diameter of 13 mm.
view full answer...The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36 volt…
view full answer...For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...We do have some options similar to the Optronics Halogen Utility Light #QH16CTS but a little smaller: - Vision X Utility Market Floodlight #XIL-UF32 (456 lumens and measuring 3-1/2" long x…
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…
view full answer...The generally accepted rule for psi increases with temperature is that for every 10 degree change there is a 2% change in psi. For tire pressures like yours like #WE76FR that require 110 psi that ends up being 2 psi for every 10 degrees of…
view full answer...Videos
for Work Lights
Help Articles
for Work Lights
Expert Answers
for Work Lights
A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…
view full answer...The Exterior LED Utility Light part #M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications so the power should be brown, the neutral should…
view full answer...The connection on the Seaflo Submersible Utility Pump #SE54FR is designed to fit a hose with an inner diameter of 13 mm.
view full answer...The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36…
view full answer...For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...We do have some options similar to the Optronics Halogen Utility Light #QH16CTS but a little smaller: - Vision X Utility Market Floodlight #XIL-UF32 (456 lumens and measuring 3-1/2" long x…
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…
view full answer...The generally accepted rule for psi increases with temperature is that for every 10 degree change there is a 2% change in psi. For tire pressures like yours like #WE76FR that require 110 psi that ends up being 2 psi for every 10 degrees of…
view full answer...