Filter Products
Filter by Style of Tie Down
$208.18 - $559.53
Videos
for Truck Camper Tie Downs
Help Articles
for Truck Camper Tie Downs
Expert Answers
for Truck Camper Tie Downs
If you have an 8' bed with no board or step OR with factory electric electric board under the cab then I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLD2140 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear…
view full answer...I have a couple of pictures that I have linked for you showing the installed tie downs to use as reference. On the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part #TLD2142 and Rear part #TLD3112 there are no notes in regards to…
view full answer...We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory…
view full answer...Yes, you can replace your GE air conditioner with the 15,000 Btu Furrion Chill HE RV Air Conditioner System #FR55PV. This will be a complete replacement with no parts of your current AC used; no other parts are needed except for what comes with the…
view full answer...Based on the supplied image it does not appear that you have a running board under the bed. If you did it would extend nearly to the rear tire. For a 2013 Ford F-250 without a running board under the bed, and with a factory hitch, the best camper…
view full answer...The correct rear Torklift camper tie down for your 2020 Ram 3500 that has a Torklift Super Magnum Hitch is the part #TLR3510.
view full answer...The Brophy Camper Hold Downs, part #HSSF, will fit your 2011 Chevrolet Silverado extended cab, long bed as long as you do not have a slide-in bed liner. They will work with a spray-in bed liner. There is not a weight capacity rating for these hold…
view full answer...Hello Steve, If the HappiJac Camper Jacks #LC736514-4 are binding, then per the instructions for the jacks, it may need lubrication. They say "anytime jack seems to labor more than usual, place a few drops of light oil into the oil hole in the…
view full answer...The B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25600 is going to be the best overall hitch for your 2018 Chevrolet Silverado 2500HD work truck with the 8' bed. This receiver is rated for up to 1,600lbs of tongue weight and 16,000lbs of…
view full answer...We do have a complete camper tie-down kit for your 2002 Ford F-350 dually long bed without running boards under the truck bed, and what you need is the following: - Front: TorkLift Custom Frame-Mounted Camper Tie-Downs #TLF2011 - Rear: TorkLift…
view full answer...The TorkLift SuperHitch Magnum trailer hitch receiver, part #TLC1211-30, has about 3/4 of an inch between the 2 receiver openings. The top receiver is a 2-1/2 inch (with a 2 inch adapter sleeve included) and the bottom is a 2 inch. It's confirmed…
view full answer...I attached pictures that show how the Curt front hitch #C31078 and the Draw Tite #65076 looks when installed and you can tell that the Draw Tite sits up a bit higher since it comes through relative to the curve in the air dam.
view full answer...