Videos
for Truck Bed Lights
Help Articles
for Truck Bed Lights
Expert Answers
for Truck Bed Lights
From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Thank you for providing the pictures. This helps me to confirm you will need the Replacement Tarp #EX92915-20 for the Extang Trifecta 2.0 Soft Tonneau Cover #EX92915 on your 2009 Toyota Tacoma.
view full answer...Pace Edwards recommends using a 303 Protectant spray on the rails of the Pace Edwards Switchblade Retractable Hard Tonneau Cover #311-SWF7084. They recommend periodically applying a generous amount of the 303 Protectant to a rag and wiping out the…
view full answer...Your Freelfree Overdrive Lure II Tandem kayak will indeed fit on your existing roof rack. According to what I've managed to look up, the kayak weighs up to 115 lbs, which is well within the capabilities of the Yakima Jetstream roof rack you…
view full answer...For your 2017 Chevy Silverado 3500 the 5th Wheel/Gooseneck Hitch Wiring harness part #C56070 would be the correct fit as your truck uses the standard 7-way round connector that this uses/needs. It is possible the wire colors you are working with…
view full answer...We have just what you need! The Thule TracRac CapRac part #TH29200XT is confirmed as a fit for a camper shell on a 2018 Ford F-150 and would work great. It also fits all bed lengths too based on how it installs. This rack has heavy-duty aero shaped…
view full answer...It looks like your dust cap shifted out of place somehow. There is nothing designed to indicate a need for replacement, but that is not the way it should look. I would pull it off all the way and inspect it. If it looks fine drive it back in and make…
view full answer...It appears that your u-bolt plate on your 2021 Grand Design Reflection 31MB, will work with the SumoSprings Trailer Helper Springs #SS26MV. The plate itself including the bends does not appear to be larger than 3/4" nor does the width appear to…
view full answer...I do have a solution for you, however the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers #63080 is specifically designed to work with Draw-Tite 2" x 2" trailer hitch receivers. Because the collars on the hitch…
view full answer...To ensure that your spindle is not sticking out of your hub farther than it should, I would recommend verifying that all of your bearings and seals are seated correctly and the hub is tightened down correctly. When tightening the hub to the spindle,…
view full answer...We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not not require a wrench and a…
view full answer...