Filter Results
$100.72 - $100.72
$65.62 - $65.62
$142.25 - $142.25
Videos
for Trailer Cargo Organizers
Help Articles
for Trailer Cargo Organizers
Expert Answers
for Trailer Cargo Organizers
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
view full answer...You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with…
view full answer...The price for the 1/2" Metal Loom Clamp #A0500 is for a single clamp. We do have the Clamp Kit #PT43VR which includes (20) 1/4", (8) 5/16", (6) 3/8", (4) 1/2", and…
view full answer...Yes, the lid is available as a replacement part. Based on the part numbers you gave me the correct replacement lid is the #FVK1020-19. For the lift arm you can use the #FVK8011-05.
view full answer...Great questions Jimmy, We haven't had any reports of the LED Trailer Tail Light w/ Reflector - Stop, Tail, Turn #DG52720PB having issues with hyper flashing so you should be good to go in those regards. When it comes to power draw, the…
view full answer...The best option we have for you would be the Rack'Em part #RA-28 which is designed to fit the roof of enclosed trailer and provides crossbars that are up to 8-1/2 feet in length but can adjust down to 4 feet.
view full answer...We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three…
view full answer...For a hub and drum assembly that fits your 3,500 lb axle on your 2021 K-Z Sportsmen Classic 181BH you need the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #84546UC3. If you have E-Z lube axles…
view full answer...The EZ Lube Trailer Spindle we carry for a 3,500 lb axle is the TruRyde Spindle, part #TRU74FR. This spindle includes the nut and washers. The overall length of this spindle is 9 inches. This spindle is compatible with #L44649 outer and #L68149…
view full answer...Yes, hubs use different size bearings for the inner and outer bearings pretty frequently. The inner bearing will be the bigger size if there are two different size bearings.
view full answer...The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer does. That being said the trickle charge…
view full answer...Yes, you can use wood screws to secure the e-tracks to the plywood walls in your trailer. However, as you mentioned the weight capacity would be less than if you were to attach them to metal beams. The tracks themselves can handle up to 2,000 lbs…
view full answer...