Filter by Brand
$381.33 - $529.57
Videos
for RV Heaters
Help Articles
for RV Heaters
Expert Answers
for RV Heaters
The Camco Olympian Wave 3 Catalytic Safety Heater for Small RVs #CAM57331 can heat a larger area (120 square feet) compared to the Little Buddy Heater which claims 95 square feet, has a built in automatic Piezo-electric spark starter which will…
view full answer...Are you basically asking how much length would this coupler add to the tongue of your trailer?
view full answer...If you will be permanently installing the Camco Olympian Wave 3 Catalytic Safety Heater part #CAM57331 then you would need to run a hose from the heater to the propane manifold. I cannot recommend you tap or splice into an existing line. The…
view full answer...Catalytic heaters like the #CAM57331 Wave 3 do indeed put out moisture as a byproduct of the heating process, it's unavoidable with that type of heater. After doing some research, I've found that the best bet to keeping a large part…
view full answer...You should be able to find the part number for your power center/converter by opening the door the fuse panel on your 2009 Forest River. You can see inside the door for the Progressive Dynamics 4000 #PD4060K it identifies it as the 4060 which uses…
view full answer...I spoke with my contact at Camco regarding the Olympian Wave 6 Catalytic Safety Heater #CAM57341 referenced in your question. He stated that the heater can indeed be mounted inside a wall, in a recessed position with the grate/front flush with the…
view full answer...The Camco Olympian Wave 3 Catalytic Safety Heater for Small RVs part #CAM57331 does not come with a thermostat. I am not really sure how that would work on a propane heater as such but we do have an electric heater with a built-in thermostat, the…
view full answer...I reached out to my contact at Camco regarding the Olympian Wave 3 Catalytic Safety Heater #CAM57331 and he said the heater requires at least 4" of clearance on each side and at least 30" of clearance from the front of the unit (where the…
view full answer...Hey Al, so we have a solution but since disc brakes require a higher PSI than drum the #DM62VR would not work on drum brakes. Instead you'd want to go with the part #DM72VR which is basically the exact same thing but made for drum brakes. You can…
view full answer...Looking at the wiring schematic on the unit, it looks like the red would get connected to a 12v power source, the black wire would be grounded, and the brown/white wire would need to be connected to the furnace thermostat. For the 2 wires with the…
view full answer...Thank you for the photo of the brake assembly from your Dexter SLR D-90 9K axle. The correct hub you need for your Dexter D-90 axle is the part #8-430-5UC3 which includes bearings, races, oil seal, oil cap, wheel bolts, and lug nuts. With this hub…
view full answer...Yes. The Camco Olympian Wave Heater #CAM57331 can be used as your primary source of heat and can be setup to be both permanently installed or portable. This is a heating solution that is safe to sleep with the unit on, but you will need to leave a…
view full answer...