Where Do You Find The Model Number For a Converter On a 2009 Forest River?

Question

Question:

where is model number on converter for a 2009 forest river trailer? trying to find size.

asked by: John J

0

Expert Reply:

You should be able to find the part number for your power center/converter by opening the door the fuse panel on your 2009 Forest River. You can see inside the door for the Progressive Dynamics 4000 # PD4060K it identifies it as the 4060 which uses the Converter # PD4060CSV.

Please send me any information you find on the labels inside your fuse panel and I will help you find the correct converter for your Forest River.

expert reply by: Bud M

0

Answer 1

The Replacement Converter #PD4655V is the correct converter for your Parallax 7355 power center. I do not see that WFCO shows their 8955PEC being acceptable to use with your Parallax 7355.

view full answer...

Answer 2

The current version of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4060K does have a switch that allows you to switch to lithium batteries. But this switch didn't get incorporated until 2020. From the picture…

view full answer...

Answer 3

The Charge Wizard on the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger part #PD4575K18LS8 automatically switches voltages while your lead acid battery bank charges. This accelerates the charge but also…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 8

The correct part to replace your current converter charger is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp part #PD4655V. This is an exact replacement and will be all you need to get back operational. I have…

view full answer...

Answer 9

Since the part #PD4655V has come out and has ability to switch between lithium and lead acid batteries the part PD4655LIV was discontinued. At one point there were separate parts for lithium and lead acid batteries but since the current one can do…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 12

Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and works…

view full answer...

Where Do You Find The Model Number For a Converter On a 2009 Forest River?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching