Review of Camco RV Heaters - Catalytic Heater - CAM57341 Video

Since the Camco Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs #CAM57341 uses LP gas as its fuel source it will create moisture like the LP Buddy Heaters. It is recommended to crack your windows near it to ensure a proper oxygen level. If…

If you mounted the Camco Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs #CAM57341 on the floor of your trailer's living quarters it will heat up into the bed area that's in the gooseneck portion of the trailer.

I spoke with my contact at Camco regarding the Olympian Wave 6 Catalytic Safety Heater #CAM57341 referenced in your question. He stated that the heater can indeed be mounted inside a wall, in a recessed position with the grate/front flush with the…

What you need is the Camco Propane Adapter #CAM59213. This allows you to adapter a hose like part #CAM57703 that you'd use for the Wave 6 #CAM57341 to connect to a 1-lb (throwaway) bottle of propane. Attached is a quick demonstration video that…

There is not reason you cannot add an additional shut off between your propane lines and the Camco Olympian Wave 3 Catalytic Safety Heater for Small RVs #CAM57331 you were looking at, but it is not required. Personally I would use propane hose as it…

The Camco Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs #CAM57341 is not designed to run off of unregulated propane. It needs LP gas which is regulated to 11 inches of water column. So you would need a regulator like the part #CAM57703…

The distance between the left and right mounting holes on the back of the Camco Wave 6 heater, part #CAM673541 is 9.65 inches.

I checked with Camco and Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs Item #CAM57341 is safe for use at elevations up to 12,000 feet.

The Camco Olympian Wave 3 Catalytic Safety Heater for Small RVs part #CAM57331 does not come with a thermostat. I am not really sure how that would work on a propane heater as such but we do have an electric heater with a built-in thermostat, the…

The Camco Olympian Wave 6 Catalytic Safety Heater #CAM57341 does have specific requirements for you to be able to keep it on, at night or otherwise. The following instructions come directly from the manual: "To assure complete combustion, an…

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

The flame is supposed to go out when you switch the valve from "start" to "high". Check out the demonstration video I attached which goes through the whole process of starting and using the Camco Olympian Wave 3 Catalytic Safety…