Videos
for RV Cargo Slides
Help Articles
for RV Cargo Slides
Expert Answers
for RV Cargo Slides
I spoke with MORrdye, and they said that they do not have a dimensional drawing of the screw holes as their attachment uses TEK screws. They go on to mention that they've never had an issue reported as…
view full answer...Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…
view full answer...I attached a picture that shows all of the dimensions of the MORryde Sliding Tray for RV Cargo Compartment #MR93FR. This picture is actually in our product pictures already but it's buried pretty far down…
view full answer...The fully assembled weight of the MORryde RV Cargo Sliding Tray - 90" x 39" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR93FR is 159 lbs.
view full answer...I attached a dimensional drawing of the item #MR69FR. The bracket width outside to outside is 28-3/4 inches and the tray itself is right at 25-3/4 inches.
view full answer...The actual overall width of the MorRyde sliding tray part #MR69FR is the 28.74 inch figure. The internal tray dimensions are narrower at 25.85 inches. I confirmed this in the past when MorRyde sent me their dimensional drawings.
view full answer...The MORryde RV Cargo Sliding Tray #MR47FR has 1.57" of clearance from the bottom of the tray to the bottom of the slides. More than likely you will need the Height Adjustment Kit #MR34VR which will raise the…
view full answer...The MORryde Generator Tray - 15-3/4" x 16-1/4" #MR99RR is 16-1/4" in length x 15-3/4"…
view full answer...If you're saying that the 25" deep x 34" wide measurement is the size of the space available then the largest option that we…
view full answer...For the MORryde #MR79RR slide out generator tray, there is not a lock or latch for the full out position. If it were me, I would look for a place to place a wedge to keep it out as necessary. I can't see any…
view full answer...The locking mechanism for the MORryde RV Cargo Sliding Tray #MR44FR is only going to keep the tray locked in the rollers and they don't really offer any kind of way to lock the tray at certain extensions. To…
view full answer...No, it really isn't but I have a solution. The MORryde RV Generator Slide Out Tray item #MR79RR is designed to be mounted in storage compartments. It needs a sturdy base to support the weight of your…
view full answer...