Filter Results
$125.97 - $125.97
$14.84 - $27.18
$8.77 - $8.77
$16.78 - $16.78
Videos
for Odor Eliminators
Help Articles
for Odor Eliminators
Expert Answers
for Odor Eliminators
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...You can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same…
view full answer...The Titan Hitch Box Extension and Reducer for 2-1/2" Trailer Hitches, #RP45292, is a confirmed fit for your 2012 Chevrolet Silverado 2500 HD short bed with a Lance camper. This extension is specifically designed for your…
view full answer...The Reese Titan Extension/Reducer you referenced, part #RP45292 would work great with the 2-1/2 inch Class V hitch on your Ram. As you mentioned, the extension has a 8K capacity when cut down to the 24 inch length, that will provide a 2 inch…
view full answer...The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E…
view full answer...The part number you gave is no longer a valid number for Bulldog jacks. It sounds like you are looking for the Bulldog Square Jack w/ Footplate - Drop Leg - Sidewind - 15" Lift - 5,000 lbs #BD190754. This has a 5,000 lb lift…
view full answer...Your old Hydraulic Trailer Brake assembly #AKFBBRK-35L can use the Uni-Servo Wheel Cylinder #AKBRKR-H7-L-CR. These are corrosion resistant coated but not aluminum. Another option is to upgrade your entire assembly to the Hydraulic Brake Kit -…
view full answer...The correct rear sway bar for your 2013 Ford F-350 SRW 4x4 is the Roadmaster part #RM-1139-173-00 that you referenced. This was designed for trucks like yours that do not have the factory sway bar and will do a great job improving the handling and…
view full answer...Yes most of the T@G campers I have seen use the Yakima 54" Tracks for Roof Racks part #Y01127 base tracks. You can get evrything you need in one kit with the Yakima HardTop SL Roof Rack - 60" CoreBar…
view full answer...The Dexter parts you've mentioned are the left and right brake shoe for a hydraulic brake that is 12-1/4" x 4". To replace those parts you can use the Replacement Hydraulic Shoe Lining for…
view full answer...Due to the fact that carbon fiber bikes have a more sensitive frame, Thule does recommend using the Thule UpRide #TH599000. Bike rack technology has not changed to make the racks less compatible, but carbon fiber bikes have become increasingly…
view full answer...Since you have a 3,500 lb axle most likely the diameter of the threaded portion of the spindle is 1 inch. You will need to verify that. And since the spindle has a hole in it for a cotter pin you would need a castle nut. For that I would recommend…
view full answer...