Videos
for Hammocks
Help Articles
for Hammocks
Expert Answers
for Hammocks
For your trailer and situation I recommend the Trailer Valet RVR12 Remote-Controlled Trailer Dolly #TV59FR. This dolly is rated for trailers with a tongue weight up to 1,200lbs and a trailer weight up to 12,000lbs. Your trailer has a maximum…
view full answer...For starters, if you have a 2018 Ford F-150 with the 6-1/2' long bed then you are going to want to use the Rightline Truck Bed Tent part #RL110730, not part #RL110710 which is for an 8' long bed. With that being said you would need to…
view full answer...Thanks for the picture! I would definitely go with one of the HD kits over the 2,000 lbs RoadActive item #RAS3611 you were looking at. Which one you will need is going to depend on whether or not your 2020 Chevy Silverado 2500HD has the factory…
view full answer...I did a little digging on your grease seal number and it looks like the 16074-224 has an inner diameter of 1.5 inches and an outer diameter of 1.987 so the correct part number you would need is the #10-9.
view full answer...The 14 inch wheels we carry have a 5 on 4-1/2 bolt pattern like part #AM20352. We also carry 14-inch tire/wheel combos with a 5 on 4-1/2 bolt pattern like part #TA65MR. I have attached links to the wheels and tire/wheel combos we do carry. I am not…
view full answer...The Stake Pocket Tie-Down Anchors #PK-SPTD are is manufactured in China. If you are looking for an option that is manufactured in the U.S., I recommend the Brophy Stake Pocket Tie Down Anchor #TL2B. The ring is a bit larger on the Brophy (3 inches)…
view full answer...The Stake Pocket Tie-Down Anchor for Flatbed Truck or Trailer #T35Z or #T355 measure 5-1/4 inches from the bottom up to the bottom of the top plate the D-ring is on. They are 3-1/2 inches wide and 2 inches deep. They are designed to fit in 2x4…
view full answer...I spoke with LockRack and they said the bolt for the Universal Crossbar Adapter for Lockrack Watersport Carrier #LR53FR measures 1-3/8" long and takes a 3/16 or 5 mm hex key.
view full answer...ABS plastic like what the Bristol Double RV Waste Valves #34466NDHR19AAA you referenced is made of can be glued to ABS plastic but plumbing codes won't allow you to glue it to PVC. You can solvent weld this to ABS plastic though!
view full answer...Yes, the Bristol Double RV Waste Valves, #34466NDHR19AAA are designed in a way to do that. Once installed you can remove the corner bolts for maintenance.
view full answer...I can definitely help you figure out what replacement valve you need for the black water system on your 2004 Mckenzie Medallion, but I'll need you to take a look at your system first since we don't have any kind of information on what waste…
view full answer...I do have a recommendation for you but we do not have a Redarc brake controller available for your 2021 Jeep Grand Cherokee. However, the similarly designed Curt Spectrum Trailer Brake Controller, #C51170 is great option and its installation is made…
view full answer...