Filter Results
$16.78 - $18.29
$13.67 - $23.21
$15.27 - $17.31
$18.06 - $22.57
$19.38 - $19.38
$16.00 - $19.07
$17.93 - $17.93
$16.18 - $23.46
$21.15 - $21.15
$19.45 - $26.88
$22.07 - $27.79
Videos
for Gas Struts
Help Articles
for Gas Struts
Expert Answers
for Gas Struts
Hey Scott, the bolt holes of the Dexter DX7.5L A-60 Brake Actuator w/ Electric Lockout - Disc #DX56FR are 3" apart horizontally and…
view full answer...For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.
view full answer...Pete, yes the Snap-In Plug for Lionshead Trailer Wheel Center Cap #LHSI60C are definitely not brittle and are better made than most. This is still made of plastic, has a chrome finish, and will work with…
view full answer...In order to hook up a Blackstone Tailgater to the quick disconnect port on the side of a trailer you should be able to use the MB Sturgis RV Quick-Connect Propane Grill Hose part #100304-60-MBS or part #100304-120-MBS. I called Blackstone and they…
view full answer...The correct replacement actuator for your UFP 34034 is the Dexter DX7.5L A-60 part #DX56FR.
view full answer...You will need to select the correct strut based on the weight rating for your current struts. These struts are 36" long from center of…
view full answer...There unfortunately isn't a guide to tell us the weld stop spacing in your 2012 Genesis Supreme Vortex so…
view full answer...Since you have carpeted bunks you need a winch rated for the entire weight of your boat (with roller bunks you can get away with a lower-rated winch) so I recommend the following from Bulldog Winch: - 12K Bulldog Winch Trailer Winch - Wireless…
view full answer...There are many factors that go into selecting the correct gas shock, the easiest would be to simply match the new shock with the existing using any labels printed on the body. If none are present or you are adding a new one then you can use a…
view full answer...The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't…
view full answer...It is imperative you check your local laws for lighting requirements in regards to your specific trailer, though I can tell you you no matter what…
view full answer...It sounds like you have the Thule Hull-A-Port, #TH834, which should fit the Yakima round bars. The Yakima round bars are only 1/4 inch taller than the Thule bars. But if it is not working then you would need longer bolts. The Hull-A-Port originally…
view full answer...Videos
for Gas Struts
Help Articles
for Gas Struts
Expert Answers
for Gas Struts
Hey Scott, the bolt holes of the Dexter DX7.5L A-60 Brake Actuator w/ Electric Lockout - Disc #DX56FR are 3" apart horizontally and…
view full answer...For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.
view full answer...Pete, yes the Snap-In Plug for Lionshead Trailer Wheel Center Cap #LHSI60C are definitely not brittle and are better made than most. This is still made of plastic, has a chrome finish, and will work with…
view full answer...In order to hook up a Blackstone Tailgater to the quick disconnect port on the side of a trailer you should be able to use the MB Sturgis RV Quick-Connect Propane Grill Hose part #100304-60-MBS or part #100304-120-MBS. I called Blackstone and they…
view full answer...The correct replacement actuator for your UFP 34034 is the Dexter DX7.5L A-60 part #DX56FR.
view full answer...You will need to select the correct strut based on the weight rating for your current struts. These struts are 36" long from center of…
view full answer...There unfortunately isn't a guide to tell us the weld stop spacing in your 2012 Genesis Supreme Vortex so…
view full answer...Since you have carpeted bunks you need a winch rated for the entire weight of your boat (with roller bunks you can get away with a lower-rated winch) so I recommend the following from Bulldog Winch: - 12K Bulldog Winch Trailer Winch - Wireless…
view full answer...There are many factors that go into selecting the correct gas shock, the easiest would be to simply match the new shock with the existing using any labels printed on the body. If none are present or you are adding a new one then you can use a…
view full answer...The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't…
view full answer...It is imperative you check your local laws for lighting requirements in regards to your specific trailer, though I can tell you you no matter what…
view full answer...It sounds like you have the Thule Hull-A-Port, #TH834, which should fit the Yakima round bars. The Yakima round bars are only 1/4 inch taller than the Thule bars. But if it is not working then you would need longer bolts. The Hull-A-Port originally…
view full answer...