Videos
for Camping Lights
Help Articles
for Camping Lights
Expert Answers
for Camping Lights
Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…
view full answer...The Replacement Clamp #RRSP112 is a single clamp for the Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB. Included is the clamp, screws, and all parts to secure the basket at one point to your crossbar.
view full answer...Yes, the clamps that come with the Thule Xsporter Pro Low Truck Bed Rack #TH84QC will fit the Deck Rail System on your 2021 Toyota Tacoma just fine - in fact, they are designed to work that way! (see attached) This has a 200 lb weight capacity…
view full answer...Sorry for the confusion, our part number #IN87RR is the same as Inno's BRP820 which does fit the Inno Wedge cargo box you referenced.
view full answer...I can help you find out which bulb is in the Optronics Co-Pilot Halogen Light. This light has a 5 watt bulb with 0.35 amp output.
view full answer...You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd want the #AKEBRK-35-SA which is a self…
view full answer...Based on the photo you sent in it looks like someone glued on a piece that isn't going to allow you to use a standard waste hose. The solution to this issue would be to remove the waste valve and replace it with another that is…
view full answer...I went to the Saris website concerning the Saris Bones EX3 #SA803 bike rack and your 2015 Subaru Forester and found no prohibitions. I checked with our vehicle fit team and they did not see any issues. You can use the EX3 with your Forester even if…
view full answer...That's quite a large gap between the top plate of the hitch and the pin box surface. That to to me would indicate there's a problem. Most likely it's a high pinned king pin. I would disconnect, try…
view full answer...Let's do some troubleshooting. First, let's check the 7-way trailer connector on your truck using a circuit tester like #PTW2993. We will check each pin for function one by one. I've attached a photo to…
view full answer...I do have a solution, but I would not recommend using a hitch extender with the Patriot Hitches Adjustable Drop Hitch Receiver #PH67SR. This receiver won't reduce the capacity of your hitch, but an extender will reduce the capacity…
view full answer...